Scholarly record
DESIGN OF TECHNOLOGY FOR MACHINING OF THIN-WALLED RACK OF HOUSE FOR CARRIER PIPE CONVEYOR DRIVE ROLLER.
Abstract
The article deals with the design of new technology for the treatment of thin-walled house for carrier pipe conveyor drive roller. Production on conventional machine tool is unsatisfactory because of the failure of the machine tool and the actual production inaccuracies. Conventional machine tools are being replaced by numerically controlled machines CNC OS which allow reuse through production and higher labor productivity. They were designed and compared the new CNC axes of different structures, appropriate tools, optimum cutting data. Were selected following CNC OS, three-axis horizontal machining center Pinnacle LH 500 A three-axis horizontal machining center Pinnacle LH 500 B with the added fourth axis and 5 - axis machining center Hermle C400. It was also made economic and performance evaluation of all alternatives.
Publication Impact Profile
Publication details
References15
Molnar V., Fedorko G., Husakova N., Kral J., Ferdynus M., Energy calculation model of an outgoing conveyor with application of a transfer chute with the damping plate, Mech. Sci. 7 (2016) 167–177.
Fedorko G., Molnár V., Živčák J., Dovica M., Husáková N., Failure analysis of textile rubber conveyor belt damaged by dynamic wear, Eng. Fail. Anal. 28 (2013) 103–114.
Strohmandl J., Use of simulation to reduction of faulty products, UPB Sci. Bull. Ser. D Mech. Eng. 76 (2014) 223–230.
Molnár V., Fedorko G., Stehlíková B., Tomašková M., Hulínová Z., Analysis of asymmetrical effect of tension forces in conveyor belt on the idler roll contact forces in the idler housing, Measurement. 52 (2014) 22–32.
Molnár V., Fedorko G., Stehlíková B., Kudelás Ľ., Husáková N., Statistical approach for evaluation of pipe conveyor’s belt contact forces on guide idlers, Measurement. 46 (2013) 3127–3135.
Fedorko G., Molnar V., Grincova A., Dovica M., Toth T., Husakova N., et al., Failure analysis of irreversible changes in the construction of rubber–textile conveyor belt damaged by sharp-edge material impact, Eng. Fail. Anal. 39 (2014) 135–148.
Kosza G., Dębski H., Ferdynus M., Application of FEM in the analysis of the structure of a trailer supporting frame with variabile operation parameters wykorzytanie mes w analizie struktury nośnej ramy naczepy o zmiennych perametrach eksploatacyjnych, 14 (2012) 107–113.
Gajdos I., Slota J., Spisak E., Jachowicz T., Tor-Swiatek A., Structure and tensile properties evaluation of samples produced by Fused Deposition Modeling, Open Eng. 6 (2016) 86–89.
Novak-Marcincin J., Torok J., Novakova-Marcincinova L., Barna J., Janak M., Use of alternative scanning devices for creation of 3D models of machine parts., 3651 (1848) 177–181.
Madac K., Durkac V., Kral J., Design of applications for CAD system Creo Parametric 1.0, Int. Sci. Herald. 4 (2012) 278–284.
Mantic M., Kulka J., Krajnak J., Kopas M., Influence of selected digitization methods on final accuracy of 3D model, (2016) 475–480.
https://www.hermle.de/cms/cs/products/product_overview/bearbeitungszentrum_c400>.
http://www.ucamind.com/39/cnc-rotary-table.html>.
http://huron.fr/our-products/vx-8/>.
http://www.mikron.sk/lh-500b>.
View or Download full articleAccess options
SWS access login
Login as SWS Scientific CommitteeLogin as SWS Scientific PartnerLogin as SWS AuthorAuthors and approved SWS contributors will read and export their own linked papers after identity matching by SWS profile, email and SGEM GlobalID.
For librarian assistance: [email protected]
Purchase Instant Access
- Article can be downloaded after successful payment.
- Article may be used according to SWS library access terms.
- Article cannot be redistributed.
