Scholarly record
MICROWAVE PLASMA COMBUSTION OF COAL WITH MAIZE SLUSH AND WASTE CARDBOARD, WOOD IN MODIFIED TUBE FURNACE
Abstract
In modified Tube reactor, where the average concentration of solids amounts to 0.1- 0.2 t/m3, i.e. the conditions for residence time are long enough for the thermal combustion of biomass waste and coal and extensive gas mixing with 60-70% excess air so enhancing biomass combustion and heat transfers to the boilers. It is necessary to create conditions of internal circulation without the transported coal and waste in modified Tube and boiler, 90-95% combustion yield were observed at the end of combustion. Total heat values of biowastes were of approximately 17.8 kJ/ kg for corn stalk and 16.2 kJ/ kg for forest wood waste for modified Tube combustion by microwave. There are various objectives to make the necessary arrangements to increase the use of biomass and solar energy as the other device. Considering the known biomass area of the potential high forest fields in northern Anatolia and located in central and eastern Anatolia it is seen as having low to medium heat resources. As we have seen in our country there is a significant potential for biomass resources will be invested. The low heat waste will be great source for waste heat and in comparison the electricity production may reach on 60-70 % thermal performances by microwave co-combustion.
Publication Impact Profile
Publication details
References14
. Amankwah, R.K., Pickles, C.A., 2005. Microwave calcination and sintering of manganese carbonate ore. Canadian Metallurgical Quarterly 44 (2), 239–248.
. Amankwah, R.K., Pickles, C.A., Yen, W.T., 2005. Gold recovery by microwave augmented ashing of waste activated carbon. Minerals Engineering 18 (2), 517–526.
. Chen TT, Dutrizac JE, Haque KE, Wyslouzil W, Kashyap S. 1984, The relative transparency of minerals to microwave radiation. Canadian Metallurgical Quarterly, 123, 3, s. 349–51.
. Datta A K; Nelson S O (2000). Fundamental Physical Aspects of Microwave Absorption and Heating in Handbook of Microwave Technology for Food Applications. CHIPS Publications, USA
. Datta A K; Sun E; Solis A (1995). Food dielectric property data and their composition-based prediction. In: Engineering Properties of Foods (Rao M A; Rizvi S S, eds), Chapter 9, 457–494. Marcel Dekker, Inc., New York
. Decareau R V (1985). Microwaves in the Food Processing Industry. Academic Press, Orlando, FL, USA
. El-Shami S M; Selim I Z; El-Anwar I M; Hassan M M (1992). Dielectric properties for monitoring the quality of heated oils. Journal of the American Oil Chemists’ Society (JAOCS), 69(9), 872–875
. Gabriel C., Gabriel S., Grant E.H., Halstead B.S.J., Mingos D.M.P., 1998, Dielectric parameters relevant to microwave dielectric heating. Chemical Society Reviews, 27, s.213–23.
. Haque KE. Microwave energy for mineral treatment processes—a brief review, 1999, International Journal of Mineral Processing, 57, 1, s.1–24.
. Hutcheon, R.M., De Jong, M.S., Adams, F.P., 1992. A system for rapid measurement of RF and microwave properties up to 1400 _C. Journal of Microwave Power and Electromagnetic Energy 27 (2), 87–92.
. Hutcheon, R.M., De Jong, M.S., Adams, F.P., Lucuta, P.G., McGregor, J.E., Bahen, L., 1992a. RF and microwave dielectric measurements to 1400 _C and dielectric loss mechanisms. In: Materials Research Society Symposium Proceedings (Microwave Processing of Materials III), vol. 269, pp. 541–551.
. Hutcheon, R.M., Hayward, P., Smith, B.H., Alexander, S.B., 1995. High-temperature dielectric constant measurement – another analytical tool for ceramic studies. Microwaves: Theory and Application in Materials Processing III, vol. 59. Ceramic Transactions, American Ceramic Society, pp. 235–241.
. Jacob J., Chia L.H.L., Boey F.Y.C.,.1995, Review—thermal and non-thermal interaction of microwave radiation with materials. Journal of Materials Science, 30, 21, s.5321–7.
. Karmazsin, E., 1987. Use of low – and high-power microwave energy for thermal analysis. Thermochimica Acta , 110, 289–295.
Citing literature
Number of times cited according to Crossref: 1
View or Download full articleAccess options
SWS access login
Login as SWS Scientific CommitteeLogin as SWS Scientific PartnerLogin as SWS AuthorAuthors and approved SWS contributors will read and export their own linked papers after identity matching by SWS profile, email and SGEM GlobalID.
For librarian assistance: [email protected]
Purchase Instant Access
- Article can be downloaded after successful payment.
- Article may be used according to SWS library access terms.
- Article cannot be redistributed.
