SWS Academic Research eLibraryEarth & Planetary Sciences

Browse

Search Results

Now showing 1 - 9 of 9

Year: 2018Subject: porosityAccess: metadata onlyclear all
Showing 1-9 of 9 records
1
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 18th SGEM International Multidisciplinary Scientific GeoConference SGEM2018, Nano, Bio, Green and Space: Technologies for Sustainable Future
Publication

LIGHTWEIGHTED PLASTERS USING PERLITE, LIME AND RECYCLED FINALY GROUD BRICK POWDER

(STEF92 Technology, 2018-11-20, Cachova, Monika)

Show more

This article is focused on the issue of lightweighted plasters. Lightweighted plaster can contribute to the contemporary tendencies of higher thermal insulating abilities of all structural materials with sufficient mechanical characteristics. Two mixtures were designed with the lightweight expanded perlite aggregate. The first one contained only expanded perlite as aggregate, whereas in the second one, the plaster silica sand was used instead of one-half of the lightweight aggregate. Lime-based components with adm...

Green Buildings Technologies and Materials2018
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 18th SGEM International Multidisciplinary Scientific GeoConference SGEM2018, Nano, Bio, Green and Space: Technologies for Sustainable Future
Publication

DEVELOPMENT OF POROUS STRUCTURE OF CERAMIC-BASED GEOPOLYMERS

(STEF92 Technology, 2018-11-20, Vejmelkova, Eva)

Show more

Geopolymers are alkali-activated materials produced by mixing silicate and aluminate phases containing minerals or aluminosilicates. This reaction results in stable polymeric networks of aluminosilicates. Nowadays, geopolymers have become very popular since they are seen as a potential alternative to ordinary concrete-based materials. They can be produced with the utilization of a variety of waste products. Therefore, the development of these materials can help to reduce greenhouse gas emissions from the productio...

Green Design and Sustainable Architecture2018
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 18th International Multidisciplinary Scientific GeoConference SGEM2018, Science and Technologies in Geology, Exploration and Mining
Publication

COMPLEXATION OF NUCLEAR MAGNETIC RESONANCE AND X-RAY COMPUTED TOMOGRAPHY METHODS FOR THE QUALITATIVE ASSESSMENT OF THE WHOLE CORE POROSITY

(STEF92 Technology, 2018-06-20, Fattakhov, A., Kosarev, V., Starovoytov, A.)

Show more

The purpose of the research is determination and comparison of the porosity values of the whole core obtained by nuclear magnetic resonance (NMR) and X-ray computed tomography (CT) methods. To achieve the purpose of the research, it was necessary to solve the following tasks: a) measurement of porosity of a whole core by NMR; b) obtaining core porosity values using X-ray CT; c) comparison of the obtained values, explanation of the differences in the porosity using these two methods; d) proposal of new approaches i...

Ecology and Environmental Protection2018
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 18th International Multidisciplinary Scientific GeoConference SGEM2018, Science and Technologies in Geology, Exploration and Mining
Publication

SPATIAL ORIENTATION AND SHAPE OF PORES IN A SANDSTONE: A CASE STUDY FROM THE OUTER CARPATHIANS BASED ON X-RAY COMPUTED MICROTOMOGRAPHY

(STEF92 Technology, 2018-06-20, Strzelecki, P. J., Radzik, N., Tarasiuk, J., Wronski, S.)

Show more

The pore space is an important part of a rock that affects its mechanical and petrophysical properties. Among numerous methods for pore space characterization X-ray computed microtomography (?CT) is one that provides information on the spatial distribution of pores within rocks. Followed by image processing and analysis, detailed information on orientation and shape of voids can be obtained. Hence, it is a good method for microstructural studies on the porous space. The aim of this paper is to present spatial vari...

Ecology and Environmental Protection2018
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 18th International Multidisciplinary Scientific GeoConference SGEM2018, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

INCREASE THE POROSITY OF THE BRICK BLOCK USING FERMENTATION RESIDUES

(STEF92 Technology, 2018-06-20, Sal, J., Novakova, P.)

Show more

How to use fermentation residues is a burden on many biogas plants. Incorporation into arable land remains the most common approach, although application costs represent approximately the same benefit for fertilization, despite the risk of soil formation and the associated degradation of the soil's ability to retain water. An alternative how to use spent dust is to re-enter into raw material of the biogas plant or a second alternative is to use dust coal as wall surfaces in the interior because of its sorption cap...

Green Buildings Technologies and Materials2018
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 18th International Multidisciplinary Scientific GeoConference SGEM2018, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

APPLICATION OF THE CONFOCAL SCANNING MICROSCOPE LEXT OLS3000 FOR SETTING THE POROSITY OF MATERIALS

(STEF92 Technology, 2018-06-20, Kostelecka, Michaela)

Show more

Porosity belongs to basic characteristics of building materials. It is a characteristic of solid or semi-rigid materials, which contain a lot of tiny and uniformly distributed cavities or holes of various shape and origin. Porosity decreases specific weight of materials, increases their insulation and other characteristics ? for example absorbability. It is defined as a ratio of pores volume in a specific amount of solid and the total volume of this amount. In the article the use of the modern confocal scanning mi...

Green Buildings Technologies and Materials2018
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 18th International Multidisciplinary Scientific GeoConference SGEM2018, Science and Technologies in Geology, Exploration and Mining
Publication

ASSESSING THE IMPACT OF THE AIR SPEED FLOWING THROUGH A GRANULAR POROUS MEDIUM ON THE LINEAR FLOW RESISTANCES

(STEF92 Technology, 2018-06-20, Tutak, Magdalena)

Show more

Underground hard coal exploitation leads to the formation of granular porous media. These media occur both in the underground parts of mines and on the surface. In the underground areas, these are the caving goaves of longwalls and the caved-in roof rocks in active mine headings. On the surface, these are most commonly the post-mining waste dumps. In both of these cases, a crucial role is played by the knowledge on the resistance of air and gases flowing through these media. In the case of underground exploitation...

Exploration and Mining2018
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 18th International Multidisciplinary Scientific GeoConference SGEM2018, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

EXPERIMENTAL AND PREDICTION OF POROSITY IN SOME SINTERED IRON-BASED POWDER METALLURGY MATERIALS BY USING ARTIFICIAL NEURAL NETWORKS

(STEF92 Technology, 2018-06-20, Marin, M., Marin, F. B., Gurau, C., Gurau, G., P.Alexandru)

Show more

The goal of the work reported in this paper is to describe and develop an artificial neural network (ANN) to evaluate the effect of processing parameters such as density, pressing and sintering time on microstructural characteristics including porosity and microstructure of some iron-based powder metallurgy (PM) materials. There are various methods for generating models to predict the the effect of processing parameters. The materials used in this study are prealloyed iron-based powders. The particle size of the p...

Micro and Nano Technologies2018
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 18th International Multidisciplinary Scientific GeoConference SGEM2018, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

IMAGE PROCESSING ANALYSIS OF POROSITY IN SOME IRON- BASED POWDER METALLURGY MATERIALS

(STEF92 Technology, 2018-06-20, Marin, F. B., Marin, M., Gurau, G., Gurau, C., Petrea, I.)

Show more

In the present study, an image porcessing analysis of porosity in some iron-based powder materials was proposed. The specimens analyzed were produced from atomised iron powders of different sizes ( 150 ?m). The analyzed powders were compressed in a mold using uniaxial pressing and the applied pressure was 600 MPa with the disc dimensions of ? 8 ? 6 mm. The compacts were sintered at a temperature of 1.150 °C with the sintering time of 60 and 90 minutes. The sintered specimens obtained were analyzed regarding the po...

Micro and Nano Technologies2018
Showing 1-9 of 9 records
1

Connected events

SGEM WORLD SCIENCE Conferences

The EPS Library connects published research with the scientific events where it was presented, reviewed and prepared for long-term scholarly discovery.

International Scientific GeoConference SGEM
SGEM GeoConference

International Scientific GeoConference SGEM

Explore the main SGEM WORLD SCIENCE forum for Earth and Planetary Sciences, where research becomes conference presentation, proceedings publication and long-term library visibility.

Visit sgem.org
SGEM Vienna Green
SGEM Vienna Green

Green Sciences and Sustainability

Explore SGEM Vienna Green — connecting sustainability, environmental science, climate research, green technologies and interdisciplinary solutions for the future.

Visit sgemviennagreen.org

International Indexing & Global Visibility of Our Scientific Publications

SGEM scientific publications gain international visibility through a broad network of scholarly indexing and abstracting databases, citation-tracking services, research discovery platforms, and academic repositories.

Depending on the platform, our publications may be accessible as indexed bibliographic records, abstracts, citation data, DOI-linked metadata, or full-text scientific papers. Coverage and availability vary across platforms and publication years.

Scopus

Scopus Scientific Database

Compendex

Engineering abstracts
& indexing

Clarivate Databases

Scientific Databases

EBSCO

EBSCO
Science Services Database

OpenAIRE

Linked research discovery
& metadata

ProQuest

Scientific Databases
Part of Clarivate

Ulrichsweb

Global serials directory
Part of Clarivate

Crossref

We are a voting CrossRef member - the official DOI provider

Dimensions

Research discovery, citations
& metadata

ScienceOpen

Research discovery
& metadata

HAL

Multidisciplinary archive
& metadata

Petroleum Abstracts

Scientific Database
Part of Clarivate

Google Scholar

Google Scholar
Scholarly Search

Scilit

Scientific literature discovery
& metadata

RSCI

Russian Science Citation Index
Part of Web of Science

OpenAlex

Open research index
& metadata

Mendeley

Scientific Databases
Part of Elsevier

GeoRef

GeoRef — AGI
Geoscience Bibliographic Database