Browse

DelPat program makes possible to design of blasting operations and cost estimation with ground vibration analysis arising from blasting. In this study, these applications of DelPat program were used for blasting works in excavation of Boyabat Dam and H.P.P. (Hydroelectric Power Plant) construction and the results were researched extensively. Blasting design was done and the results of planned blasting works and ground vibration measurements were analyzed by use of DelPat. At the end of some shots, 35 events were r...

Quartzite which is used in glass industry as raw material includes useful and harmful components. Grades of SiO2 (Silicon Dioxide) the useful component and Fe2O3 (Iron (III) Oxide) the harmful component effect the product quality significantly due to the method of glass production. Furthermore, it’s necessary to determine grade distribution of quartzite ore body, to gain optimum benefit from the ore body that assessed by quality distribution. It is required that to mix high grade and low grade ore bodies togethe...

In this study, the relationship between ground vibration, particle size distribution and energy distribution caused by blasting were investigated. For this purpose, ground vibrations were measured by using ground vibration monitors, Seismic Energies were calculated according to ground vibrations and particle size distribution were analyzed by using Split Desktop software. After these measurements and simulation, The relationship between PPV and SD which is the most widely used relationship in literature to predict...

The environmental problems arising from ground vibration has been faced and discussed frequently in various industries such as quarry, mining, civil works, shaft, tunneling, pipe line and dam construction etc. where the blasting operations are unavoidable. In bench blast design, not only the technical and economical aspects, such as block size, uniformity and cost, but also the elimination of environmental problems resulting from ground vibration and air blast should be taken into consideration. One of the fundame...

This paper presents the analysis of ground vibration parameters induced by blasting excavations realized at different sites located close to the residential areas. Within the scope of this study, in order to predict peak particle velocity and determine the slope of the attenuation curve for all sites and rock units, ground vibration components were measured for all blast events over a long period. During the study, while the parameters of scaled distance were recorded carefully, the ground vibration components wer...

This paper presents the results of ground vibration measurements and environmental issues occurred on tunnel blasting activities during KavacД±k-Beykoz waste water tunnel construction under a residential area in Istanbul, Turkey. Within the scope of the study, the blasting pattern of tunnel was engineered by using Tunnel 2000 design software. 5 events in 5 shots at S2 shaft tunnels, , 6 events in 6 shots at S4 shaft tunnels, , 32 events in 32 shots at S6-shaft tunnels and, 7 events in 7 shots at S7 shaft tunnels w...

In this study, the vibration and air shock measurement results are given in order to evaluate the environmental results of excavation works with explosions executed in the agrega quarry by Д°lkdal Mining Industry Ltd. Corp. which is working in the borders of Kemerburgaz region of Ey\"up county in Д°stanbul city on producing agrega. The blasting pattern, explosive material charge parameters and vibration measurement results of each blastings are recorded. In the research, the frequency and particle velocity quantit...

Within the scope of this study, Kuz-Ram and JKMRC fragmentation estimation models were applied to bench blasting operations and pros and cons of models were determined by comparing estimation results with the real fragmentation results obtained from digital image processing technique. On the other side, bench blast optimization method by means of models and digital image processing technique, is introduced in order to get desired fragmentation result from bench blast.

This paper presents the results of ground vibration analysis induced by blasting during the construction of the Istanbul Kadık\"oy-Kartal metro tunnel. Different rock formations in this tunnel route which is 21,6 km in length were encountered during the excavation with blasting. As a first stage, Test site is divided into 3 main regions with respect to lithology changes in the rock units and Hoek’s Geological Strength Index value of these rock units. In the first region representing S8 shaft tunnels, 59 events ...