Browse

The influence of ultrasound energy on bioscouring treatment applied on a 50 % of hemp + 50 % of cotton woven fabric was studied. The aim of the bioscouring treatment was the removal of the natural cellulose attendants for better fabric properties. The treatment conditions were: variable concentration between 1-3 % (o.w.f.) of the commercial enzyme product Beisol PRO, which is a mixture of pectinases from Bezema Company, Switzerland, 2 g/L of the complexing agent EDTA, 0.5 % of wetting agent Denimcol Wash RGN, phos...

The efficiency of bioscouring treatment applied on 50 % of flax + 50 % of cotton material by determination of the residual Ca2+ was studied. The treated samples were analyzed using a spectrophotometric method based on the measuring of the colour strength [K/S] of the bioscoured material after dyeing with Ruthenium red and Alizarin. The reflectance (R %) at 540 nm was measured and [K/S] values were calculated [1, 2]. The purpose of bioscouring was the removal of morphological impurities present in the cotton and fl...

The paper presents a new method for reconditioning of automotive parts in an ultrasonic field by reworking. Experimental results were obtained in the case of using different material couples. Using three couples of different materials, three technological metallization processes were studied: - oxy-fuel flame and wire; - three-wire electric arc - oxy-fuel flame and powder In experimental work the following material couples were studied: X30NiMoVCr11-STELLITE 12 AWS, X30NiMoCr11-TP 4000, FxMo1Si24-STELLITE 12AWS. D...