Peer-reviewed articles 17,970 +


Title: NUMERICAL MODELLING OF THE ACCUMULATION OF NITROGEN OXIDES IN DEAD-END AND MAIN WORKINGS
NUMERICAL MODELLING OF THE ACCUMULATION OF NITROGEN OXIDES IN DEAD-END AND MAIN WORKINGS

PlumX Article Metrics by Elsevier
Pavel Amosov
10.5593/sgem2023/1.1/s03.46
10.5593/sgem2023/1.1
1314-2704
978-619-7603-56-9
English
23
1
•    Prof. DSc. Oleksandr Trofymchuk, UKRAINE 
•    Prof. Dr. hab. oec. Baiba Rivza, LATVIA
Exploration and Mining
The results of numerical simulation of the accumulation of nitrogen oxides in the deadend and main workings during the operation of the mucking and flitting device at the stages of loading and auxiliary operations are presented. The process of accumulation of nitrogen oxides is modeled on the basis of a previously developed two-stage methodological approach: the 1st stage is the calculation of aerodynamic parameters with applying a standard (?? ? ??)-model turbulence and the 2nd stage is the solution of the convective-diffusion equation. Numerical experiments were performed for the ranges of air rate in a main working (6 ? 12 m3/sec), the length of a dead–end working (10 ? 25 m) and air leakage-suction (-0.05 ? +0.05 m3/sec) through the failure zone of a dead-end working with a length of 10 m. The results of the analysis of the accumulation of nitrogen oxides in the dead-end and main workings with variations of these parameters are presented. Significant pollution of the atmosphere of the main working was noted at the minimum length of the dead-end working. Almost linear dependences of concentration and mass rate on the amount of leakage-suction and time are predicted with the accepted values of leakage-suction and air rate. The approach used with minor modifications can be used both for other geometric dimensions of workings, and for various types of initial conditions of gas contamination of dead-end workings during blasting and operation of equipment with internal combustion engines.
[1] Kozyrev S.A., Amosov P.V. Substantiation of minimal distance from the excavation face to the ventilation pipes // Labor safety in industry. 2012. Issue 10. pp. 79-83.
[2] Kozyrev S., Amosov P. Numerical modelling of blind excavation ventilation taking into account failure zone // International Multidisciplinary Scientific GeoConference SGEM. 2017. Vol. 17, issue 13. pp. 591-598.
[3] Departmental Norms of Process Design 13-2-93 “Technological design standards for mining-metallurgy enterprises applying underground mining” // URL: http://files.stroyinf.ru/Data1/58/58119/ (data accepted: 27.01.2017)
[4] Alekhichev S.P., Puchkov L.A. Aerodynamics of failure zones and calculation of block air leakages // Nauka, Leningrad, 1968. 67 p.
conference
https://doi.org/10.5593/sgem2023/1.1/s03.46
Download PDF
Proceedings of 23rd International Multidisciplinary Scientific GeoConference SGEM 2023
23rd International Multidisciplinary Scientific GeoConference SGEM 2023, 03 - 09 July, 2023
Proceedings Paper
STEF92 Technology
International Multidisciplinary Scientific GeoConference-SGEM
SWS Scholarly Society; Acad Sci Czech Republ; Latvian Acad Sci; Polish Acad Sci; Russian Acad Sci; Serbian Acad Sci and Arts; Natl Acad Sci Ukraine; Natl Acad Sci Armenia; Sci Council Japan; European Acad Sci, Arts and Letters; Acad Fine Arts Zagreb Croatia; Croatian Acad Sci and Arts; Acad Sci Moldova; Montenegrin Acad Sci and Arts; Georgian Acad Sci; Acad Fine Arts and Design Bratislava; Russian Acad Arts; Turkish Acad Sci.
383-390
03 - 09 July, 2023
website
9035
mucking and flitting device, numerical simulation