Peer-reviewed articles 17,970 +


Title: INVESTIGATION OF THE PROCESS OF INTRODUCING THE CENTRALIZER SLATS INTO THE WALLS OF THE TRUNK WHEN DRILLING INCLINED WELLS
INVESTIGATION OF THE PROCESS OF INTRODUCING THE CENTRALIZER SLATS INTO THE WALLS OF THE TRUNK WHEN DRILLING INCLINED WELLS

PlumX Article Metrics by Elsevier
Akshyryn Zholbassarova; Danabek Saduakassov; Aliya Togasheva; Maxat Tabylganov; Aigul Gusmanova
10.5593/sgem2024/1.1/s06.77
10.5593/sgem2024/1.1
1314-2704
978-619-7603-67-5
English
24
1.1
•    Prof. DSc. Oleksandr Trofymchuk, UKRAINE 
•    Prof. Dr. hab. oec. Baiba Rivza, LATVIA
6.Oil and Gas Exploration
In this article, a theoretical and experimental study of the processes of embedding the centralizer bars on the walls of the well during drilling is carried out. For this purpose, a mathematical model has been created that describes the dynamics of the process, taking into account the axial load on the bit and the own weight of the drilling column. The formation of a compacted core in front of the centralizer, as well as the stress-strain state of the medium, is considered. The proposed approach allows us to take into account the possibility of introducing a centralizer on the walls of the well and adjust the curvature parameters of the trunk of inclined wells. The results of this study can be useful for optimizing the drilling process and improving the efficiency of wells. The study is aimed at analyzing the technical and economic aspects of the installation of inclined wells, based on the state of spatial curvature of the trunk. It was found that stabilization of the design azimuth of the curvature is a difficult task in deep inclined wells due to the lack of continuous information about the course of the curvature parameters. Technological problems such as measurement inaccuracy and selection of equipment parameters are described. Special attention is paid to the use of a magnetic translator and a downhole inclinometer to accurately orient the deflector at the bottom of the well, which is the most accurate and cost-effective method in modern drilling operations.
[1] Shlyun N.V., Gulyayev V.I. Buckling of a drill-string in two-sectional bore-holes. Int. J. Mech. Sci. 2020, 172, 105427.https://doi.org/10.1016/j.ijmecsci.2020.105427
[2] El Sabeh K., Gaurina-Medimurec N., Mijic P., Medved I., Pasic B. Extended-Reach Drilling (ERD)—The Main Problems and Current Achievements. Appl. Sci. 2023, 13, 4112. https://doi.org/10.3390/app13074112
[3] Tong H., Shao Y. Mechanical Analysis of DS in Horizontal Directional Drilling. Appl. Sci. 2022, 12, 3145. https://doi.org/10.3390/app12063145
[4] Lashari S., Takbiri-Borujeni A., Fathi E. Drilling performance monitoring and optimization: A data-driven approach. J. Petrol. Explor. Prod. Technol. 2019, 9, 2747–2756. https://doi.org/10.1007/s13202-019-0657-2
[5] Epelle E.I., Gerogiorgis D.I. A review of technological advances and open challenges for oil and gas drilling systems engineering. 2020 AIChE Journal 66(4),e16842. https://doi.org/10.1002/aic.16842
[6] Khajiyeva L.A., Andrianov I.V., Sabirova Y.F., Kudaibergenov A.K. Analysis of Drill-String Nonlinear Dynamics Using the Lumped-Parameter Method. Symmetry 2022, 14, 1495. https://doi.org/10.3390/sym14071495
[7] Erge O. Modeling Cuttings Transport and Annular Pack-Off Using Local Fluid Velocities with the Effects of Drillstring Rotation and Eccentricity/ Oney Erge, Eric van Oort // Paper SPE 199587. – 2020. – 18 p. https://doi.org/10.2118/199587-MS
[8] Shirangi M.G.Digital Twins for Drilling Fluids: Advances and Opportunities / M. G.Shirangi// Paper SPE 199681. – 2020. – 18 p. https://doi.org/10.2118/199681-MS
[9] D.M. Lobo, T.G. Ritto, D.A.Castello, M.L.M. de Souza. On the calibration of drill-string models based on hysteresis cycles data. International Journal of Mechanical Sciences Volume 177, 1 July 2020, 105578. https://doi.org/10.1016/j.ijmecsci.2020.105578
[10] Togasheva A., Bayamirova R., Sarbopeyeva M., Bisengaliev M., Khomenko V.L. Measures to prevent and combat complications in the operation of high-viscosity oils of western Kazakhstan. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences. Volume 1. Number 463 (2024), Рр.257–270. https://doi.org/10.32014/2024.2518-170X.379
[11] Togasheva A.R., Bayamirova R.Y., Zholbassarova A.T., Sarbopeeva, M.D., Arshidinova M.T. (2023). Pilot field tests of shock-wave treatment of wells at the fields of JSC Ozenmunaigas. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM. – 23(1.1). Рр.719–727. doi 10.5593/sgem2023/1.1/s06.86.
[12] Ratov B.T., Fedorov B.V. (2013) Hydroimpulsive development of fluid-containing recovery. Life Science Journal, 10(SPL.ISSUE11), pp. 302–305. ISSN 10978135
[13] Ratov, B. Т., Mechnik, V. А., Gevorkyan, Е. S., Matijosius, J., Kolodnitskyi, V. М., Chishkala, V. А., Kuzin, N. О., Siemiatkowski, Z., & Rucki, M. (2022a). Influence of CRB2 additive on the morphology, structure, microhardness and fracture resistance of Diamond Composites based on WC-Co Matrix. Materialia, 25, 101546. https://doi.org/10.1016/j.mtla.2022.101546
[14] Chernova, M., Kuntsyak, Y., Ratov, B., Sudakov, A., & Nuranbayeva, B. (2022). Substantiation of the use of polymer-composite materials, which reduce the influence of dynamic friction forces of macrostructural surfaces, when drilling wells. SGEM International Multidisciplinary Scientific GeoConference. EXPO Proceedings. https://doi.org/10.5593/sgem2022/1.1/s03.049
[15] Mamalis, A., Mechnik, V., Morozow, D., Ratov, B., Kolodnitskyi, V., Samociuk, W., & Bondarenko, N. (2022). Properties of cutting tool composite material diamond–(fe–ni–cu–sn) reinforced with nano-VN. Machines, 10(6), 410. https://doi.org/10.3390/machines10060410
[16] Ratov, B. T., Mechnik, V. A., Bondarenko, N. A., Kolodnitskyi, V. M., Kuzin, N. O., Gevorkyan, E. S., & Chishkala, V. A. (2021). Effect of vanadium nitride additive on the structure and strength characteristics of diamond-containing composites based on the fe–cu–ni–SN matrix, formed by cold pressing followed by Vacuum Hot Pressing. Journal of Superhard Materials, 43(6), 423–434. https://doi.org/10.3103/s1063457621060095
[17] Ratov, B. T., Fedorov, B. V., Khomenko, V. L., Baiboz, A. R., & Korgasbekov, D. R. (2020). Some features of drilling technology with PDC bits. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 13–18. https://doi.org/10.33271/nvngu/2020-3/013
[18] Biletsky M.T., Ratov B.T., Kozhevnykov A.А., Baiboz A.R., Delikesheva D.N. (2018) Updating the theoretic model of rock destruction in the course of drilling. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 2018, 2(428), pp. 63–71. ISSN 22245278
[19] Ratov, B. T., Fedorov, B. V., Omirzakova, E. J., & Korgasbekov, D. R. (2019a). Development and improvement of design factors for PDC Cutter Bits. Mining Informational and Analytical Bulletin, 11, 73–80. https://doi.org/10.25018/0236-1493-2019-11-0-73-80
[20] Kasenov, A. K., Biletskiy, M. T., Ratov, B. T., & Korotchenko, T. V. (2015a). Problem analysis of geotechnical well drilling in complex environment. IOP Conference Series: Earth and Environmental Science, 24, 012026. https://doi.org/10.1088/1755-1315/24/1/012026
conference
https://doi.org/10.5593/sgem2024/1.1/s06.77
Download PDF
Proceedings of 24th International Multidisciplinary Scientific GeoConference SGEM 2024
24th International Multidisciplinary Scientific GeoConference SGEM 2024, 1 - 7 July, 2024
Proceedings Paper
STEF92 Technology
International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM
SWS Scholarly Society; Acad Sci Czech Republ; Latvian Acad Sci; Polish Acad Sci; Russian Acad Sci; Serbian Acad Sci and Arts; Natl Acad Sci Ukraine; Natl Acad Sci Armenia; Sci Council Japan; European Acad Sci, Arts and Letters; Acad Fine Arts Zagreb Croatia; Croatian Acad Sci and Arts; Acad Sci Moldova; Montenegrin Acad Sci and Arts; Georgian Acad Sci; Acad Fine Arts and Design Bratislava; Russian Acad Arts; Turkish Acad Sci.
615-622
1 - 7 July, 2024
website
9905
centralizer, inclined well, mathematical model, stress-strain state, deflector.

24th SGEM International Conference on Earth & Planetary Sciences


International GeoConference SGEM2024
28 June - 8 July, 2024 / Albena, Bulgaria

Read More		   

SGEM Vienna GREEN "Green Science for Green Life"


Extended Scientific Sessions SGEM Vienna GREEN
25 - 29 November, 2024 / Vienna, Austria

Read More
   

A scientific platform for Art-Inspired Scientists!


The Magical World Where Science meets Art
Vienna, Austria

Read More