Scholarly record
JOINT CONFIGURATION OF COMPOSITE STRUCTURES
Abstract
Multi Storied structures are used worldwide and have outstanding advantages in the use of composite materials in structural application. This study heads to an experimental study to reproduce the behavior on a composite joint configuration. Due to the lack of knowledge, during the last few years a lot of studies are based on the semi-rigid composite joints that can provide useful data about the behavior and the resistance of these connections. A number of two tests were performed to obtain a better development of the joint behavior. Finally, the composite connectionпїЅs behavior is discussed in detail, conclusions and some recommendation are presented.
Publication Impact Profile
Publication details
References15
Heyman, J. (1999). The Science of Structural Engineering;
Cristina Campian, Vl.Sav, Nicolae Chira, Al.Chira, Stength and ductility of concrete encased composite columns, STESSA 2012, Proceedings of the 7th International Conferenceon behaviour of steel structures in seismic areas, Santiago, Chile, 9-11 January 2012;
Jose Henriques, Luis Simoes da Silva, Isabel Valente - Design model for composite beam-to-reinforced concrete wall joints. Steel Construction 6, Berlin, 2013
ABAQUS - Explicit user's manual, version 6.10. Pawtucket: Hibbit, Karlsson & Sorensen, Inc., 2010;
Eurocode4 (SREN-1994-1-1:2004) Design of composite steel and concrete structure. Part 1-1: General rules and rules for buildings;
ECCS Recomended testing procedure for assessing the behaviour of structural steel elements under cyclic loads. Doc. no 45 of European Convention for Constructional Steelwork, TWG 1.3, 1986;
P100 – Cod de proiectare seismică Partea I Prevederi de proiectare pentru clădiri, 2013;
Javier Gracia, Eduardo Bayoa, Fabio Ferrario, Oreste Bursi , Aurelio Braconi, Walter Salvatore - The seismic performance of a semi-rigid composite joint with a double-sided extended end-plate. Part I: Experimental research, Elsevier, 2009;
EN 10002-1 - European Standard Metallic materials - Tensile testing - Part 1: Method of test at ambient temperature, July 2001;
EN 10025:2004, European structural steel standard, Hot rolled products of structural steels;
European Convention or Constructional Steelwork- ECCS. Dessign of Composite Joints for Buildings. ECCS publication No.109, Technical Committe 11, Composite Structures, 1st ed. Belgium, 1999
EC 4: Design of composite steel and concrete structures Part 1-1
V. Pacurar, C. Moga, St. Gutiu, Cristina Câmpian „Design of composite columns in accordance with Eurocode 4”, Taylor &;Francis, London/ Leiden/ New York/ Philadephia /Singapore , ISBN 0415408172, pag 419-424;
Jose Henriques, Ana Ozbolt, Jiri Zizka, Ulrike Kuhlmann, Luis Simoes da Silva, Frantisek Wald - Behaviour of steel-to-concrete joints - moment resisting joint of composite beam to reinforced concrete wall. European Conference on Steel and Composite Structures, Hungary, 2011;
Jose Henriques, Luis Simoes da Silva, Isabel B. Valente - Numerical modeling of composite beam to reinforced concrete wall joints, Part I: Calibration of joint components. Engineering Structures, ELSEVIER, 2013;
View or Download full articleAccess options
SWS access login
Login as SWS Scientific CommitteeLogin as SWS Scientific PartnerLogin as SWS AuthorAuthors and approved SWS contributors will read and export their own linked papers after identity matching by SWS profile, email and SGEM GlobalID.
For librarian assistance: [email protected]
Purchase Instant Access
- Article can be downloaded after successful payment.
- Article may be used according to SWS library access terms.
- Article cannot be redistributed.
