Scholarly record
NEW TRENDS IN FIRE TESTING OF ELECTRICAL CABLES
Abstract
This paper deals with new trends in fire testing of electrical cables. At present, the most widely used tests of electrical cables are reaction to fire tests. The cable systems powering electrical devices which have to remain operational for a certain period of time under fire conditions are additionally subjected to circuit integrity maintenance testing. New trends in cable fire tests include tests of critical heat flux, testing the effect of cable inclination, current load, voltage and frequencies to the rate of flame spread over the cable surface, and tests to assess the impact of electrical cables fire on its environment (surroundings). The impact of the electrical cables fire on its environment is expressed by the released heat (maximum heat release rate). Few tests evaluate the effect of the mutual spacing between electrical cables on the maximum heat release rate. In this paper, therefore, the influence of the mutual spacing between samples of power cable and signal cable (with the B2ca fire class) on the maximum heat release rate was assessed. Both of the examined cables showed a higher maximum heat release rate at the gap between samples equals to the cable diameter compared to the samples placed next to each other. This paper also assessed the impact of mutual spacing between investigated cables on their combustion efficiency. The obtained data suggest that the mutual spacing of samples has only negligible impact on the efficiency of combustion.
Publication Impact Profile
Publication details
References15
EN 13501-6:2014: Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables, European Committee for Standardization, Brussels, Belgium, 2014, 28 p.
STN 92 0205:2014: Fire behaviour of construction products and building constructions. Circuit integrity maintenance of cable systems. Requirements, testing, classification and aplication of test results, Slovak Office of Standards Metrology and Testing, Bratislava, Slovak Republic, 2014, 20 p.
Courty L., Garo J.P., External heating of electrical cables and auto-ignition investigation, Journal of Hazardous Materials, vol. 321, pp 528-536, 2017.
Kobayashi Y., Konno Y., Huang X., Nakaya S., Tsue M., Hashimoto N., Fujita O., Fernandez-Pello C., Effect of insulation melting and dripping on opposed flame spread over laboratory simulated electrical wires, Fire Safety Journal, vol. 95, pp 1-10, 2018.
Citerne J.M., Dutilleul H., Kizawa K., Nagachi M., Fujita O., Kikuchi M., Jomaas G., Rouvreau S., Torero J.L., Legros G., Fire safety in space: Investigating flame spread interaction over wires, Acta Astronautica, vol. 126, pp 500-509, 2016.
Lim S.J., Park S.H., Park J., Fujita O., Keel S.I., Chung S.H., Flame spread over inclined electrical wires with AC electric fields, Combustion and Flame, vol. 185, pp 82-92, 2017.
Hu L., Zhang Y., Yoshioka K., Izumo H., Fujita O., Flame spread over electric wire with high thermal conductivity metal core at different inclinations, Proceedings of the Combustion Institute, vol. 35, pp 2607-2614, 2015.
Zhang J., Study of polyamide 6-based nanocomposites, Polytechnic University, New York, United States, 2008, 142 p.
Carcillo M., Caro A.S., Sonnier R., Ferry L., Gesta E., Lagreve C., Fire behaviour of electrical cables in cone calorimeter: Influence of cables structure and layout, Fire Safety Journal, vol. 99, pp 12-21, 2018.
Meinier R., Sonnier R., Zavaleta P., Suard S., Ferry S., Fire behavior of halogen-free flame-retardant electrical cables with the cone calorimeter, Journal of Hazardous Materials, vol. 342, pp 306-316, 2018.
Martinka J., Rantuch P., Sulova J., Martinka F., Assessing the fire risk of electrical cables using a cone calorimeter, Journal of Thermal Analysis and Calorimetry, DOI: 10.1007/s10973-018-7556-5, pp 1-15, 2018.
ISO 5660-1:2015: Reaction to fire tests - Heat release, smoke production and mass loss rate. Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement), International Organization for Standardization, Geneva, Switzerland, 2015, 55 p.
Ferek R.J., Reid J.S., Hobbs P.V., Emission factors of hydrocarbons, halocarbons, trace gases and particles from biomass burning in Brazil, Journal of Geophysical Research, vol. 103, pp 107-118, 1998.
Ward D.E., Hao W.M., Air toxic emissions from burning of biomass globally: preliminary estimates, Proceedings of 85th Annual Meeting and Exhibition, Air & Waste Management Association, Air & Waste Management Association, Vancouver, Canada, pp 92-98, 1992.
Hurley M.J., Gottuk D.T., Hall J.R., Harada K., Kuligowski E.D. Puchovsky, M., Torero J.L., Watts J.M., Wieczorek C.J., SFPE Handbook of Fire Protection Engineering, Springer, New York, United States, 2016, 3493 p.
View or Download full articleAccess options
SWS access login
Login as SWS Scientific CommitteeLogin as SWS Scientific PartnerLogin as SWS AuthorAuthors and approved SWS contributors will read and export their own linked papers after identity matching by SWS profile, email and SGEM GlobalID.
For librarian assistance: [email protected]
Purchase Instant Access
- Article can be downloaded after successful payment.
- Article may be used according to SWS library access terms.
- Article cannot be redistributed.
