Scholarly record
METHODOLOGY FOR OPTIMIZING DRILL BIT PERFORMANCE
Abstract
The optimization of technological processes is vital for advancing scientific and technical progress in exploration activities, particularly in drilling operations. The integration of operating microprocessor equipment and automated management systems has opened up new opportunities for theoretical research in optimization processes and drillings. Control systems for drilling exploration wells on solid minerals enable real-time operation and data collection, processing, and diagnosis of equipment functionality. Optimization of technological processes using modern equipment aims to enhance production efficiency, improve quality, and reduce costs. Despite advancements in equipment, tools, and drilling technology, there are still significant opportunities for increasing productivity and improving technical and economic indicators in prospecting drilling. Optimization criteria vary depending on the objectives, with the maximum productivity often achieved by minimizing drilling time. The task of finding the maximum drilling speed per run involves optimizing parameters such as weight on bit, tool speed, and mud flow rate. A novel technique proposed in this study involves cyclic intra-run changes in speed per minute as the optimization criterion, rather than mechanical speed. The developed method is applicable to any rock cutting instrument and drilling method, with the optimization of drilling speed per run as a function of drilling time. The use of time and speed coefficients simplifies calculations and reveals regularities in the drilling process, contributing to the optimization of drilling operations.
Publication Impact Profile
- Citations
- Scopus - Citation Indexes: 16
- Captures
- Mendeley - Readers: 2
Publication details
References19
Kale A., Zhang D., David A., Heuermann-Kuehn L., Fanini O. Methodology for Optimizing Operational Performance and Life Management of Drilling Systems Using Real Time-Data and Predictive Analytics. Paper presented at the SPE Digital Energy Conference and Exhibition, The Woodlands, Texas, USA, 2015. https://doi.org/SPE-173419-MS DOI: 10.2118/173419-ms
Khomenko V., Ratov B., Pashchenko O., Davydenko O., Borash B. Justification of drilling parameters of a typical well in the conditions of the Samskoye field. IOP Conference Series: Earth and Environmental Science, Vol. 1254, p. 012052, 2023. DOI: 10.1088/1755-1315/1254/1/012052
Kozhevnykov A., Khomenko V., Liu B., Kamyshatskyi O., Pashchenko O. The History of Gas Hydrates Studies: From Laboratory Curiosity to a New Fuel Alternative. Key Engineering Materials, 844, pp 49�64, 2020. DOI: 10.4028/www.scientific.net/kem.844.49
Asgharzadeh S.R., Hubbell. C., Perez H., Hedengren J., Pixton D. Combined rate of penetration and pressure regulation for drilling optimization by use of high-speed telemetry. SPE Drill Complet 30(01), pp 17�26, 2015. DOI: 10.2118/170275-pa
Hossein Yavari, Mohammad Fazaelizadeh, Bernt Sigve Aadnoy, Rasool Khosravanian, Jafar Qajar, Mostafa Sedaghatzadeh, Masoud Riazi. An approach for optimization of controllable drilling parameters for motorized bottom hole assembly in a specific formation, Results in Engineering, Volume 20, 101548, 2023. ISSN 2590-1230, DOI: 10.1016/j.rineng.2023.101548
Hankins D., Salehi S., Karbalaei S. F. An integrated approach for drilling optimization using advanced drilling optimizer. J Pet Eng 2015:281276, 2015. DOI: 10.1155/2015/281276
Ratov, B., Borash, A., Biletskiy, M., Khomenko, V., Koroviaka, Y., Gusmanova, A., Pashchenko, O., Rastsvietaiev, V., & Mat�ash O. Identifying the operating features of a device for creating implosion impact on the water bearing formation. Eastern-European Journal of Enterprise Technologies, 5(1 (125), pp 35�44. 2023. DOI: 10.15587/1729-4061.2023.287447
Eren Tuna, Ozbayoglu, Evren. Real Time Optimization of Drilling Parameters During Drilling Operations. DOI: 10.2118/129126-MS, 2010. https://doi.org/10.1016/j.petrol.2015.07.027
Yang Zhiyuan Liu, Yongsheng Qin, Xing Dou, Zijun Yang, Gansheng Lv, Jianguo Hu, Yuanbiao. Optimization of drilling parameters of target wells based on machine learning and data analysis. Arabian Journal for Science and Engineering. 48, 2022. DOI: 10.1007/s13369-022-07103-x
Riazi M., Mehrjoo H., Nakhaei R., Jalalifar H., Shateri M., Riazi M., Ostadhassan M., Hemmati-Sarapardeh A. Modelling rate of penetration in drilling operations using RBF, MLP, LSSVM, and DT models. Scientific Reports, 12, 2022. DOI: 10.1038/s41598-022-14710-z
Said, Mohammed & Pilgrim, Rick & Rideout, D. & Butt, Stephen. (2022). Theoretical Development of a Digital-Twin Based Automation System for Oil Well Drilling Rigs. DOI: 10.2118/208902-MS
Ashena, Rahman & Rabiei, M. & Rasouli, Vamegh & Mohammadi, Amir & Mishani, Siamak. Drilling parameters optimization using an innovative artificial intelligence model. Journal of Energy Resources Technology. 143. 050902-1, 2021. DOI: 10.1115/1.4050050
Bataee, Mahmood & Saleh, Mohseni. (2011). Application of Artificial Intelligent Systems in ROP Optimization: a Case Study. DOI: 10.2118/140029-MS
Darwesh, Ali & Rasmussen, Thorkild & Al-Ansari, Nadhir. (2019). Controllable drilling parameter optimization for roller cone and polycrystalline diamond bits. Journal of Petroleum Exploration and Production Technology. https://doi.org/10. DOI: 10.1007/s13202-019-00823-1
Andrade, Caetano & Saavedra, Luis & Tunkiel, Andrzej & Sui, Dan. (2021). Rotary steerable systems: mathematical modeling and their case study. Journal of Petroleum Exploration and Production Technology. 11. 2743-2761. DOI: 10.1007/s13202-021-01182-6
Abbas, Ahmed & Alqatrani, Ghassan & Saba, Mortadha & Mohammed, Haider & Al-Bazzaz, Waleed. (2020). Application of Statistical Analysis to Optimize Rate of Penetration. DOI: 10.2523/IPTC-19825-MS
Roohi A., Ashena R., Thonhauser G., Finkbeiner T., Gerbaud L., Rasouli V. An experimental investigation of drilling performance improvement using reaming while drilling. Journal of Energy Resources Technology, 144, pp 1-17, 2021. DOI: 10.1115/1.4052611
Hadian M., Etesami D., Zhang W. A formation-based approach for modeling of rate of penetration for an offshore gas field using artificial neural networks. Journal of Natural Gas Science and Engineering. 95, 2021. DOI: 10.1016/j.jngse.2021.104104
Zhang Qi-Zhi & LI, Wei-Xiao & SHA, Lin-Xiu. (2017). Drilling Parameters Optimization Based on Chaotic Multi-Objective Particle Swarm Optimization Algorithm. DEStech Transactions on Engineering and Technology Research. DOI: 10.12783/dtetr/iceeac2017/10730
Citing literature
Number of times cited according to Crossref: 16
View or Download full articleAccess options
SWS access login
Login as SWS Scientific CommitteeLogin as SWS Scientific PartnerLogin as SWS AuthorAuthors and approved SWS contributors will read and export their own linked papers after identity matching by SWS profile, email and SGEM GlobalID.
For librarian assistance: [email protected]
Purchase Instant Access
- Article can be downloaded after successful payment.
- Article may be used according to SWS library access terms.
- Article cannot be redistributed.