SWS Academic Research eLibraryEarth & Planetary Sciences

Scholarly record

VERTICALITY OF THE HEADFRAME OF WORKING SHAFT NO. 6 AT THE LAZY SITE

Eva Jirankova, Roman Kapica, Dana Vrublova

First published: 2017-06-20https://doi.org/10.5593/sgem2017/22/s09.097View metrics

Abstract

With the advance of mining to greater depths, the fully protecting safety pillar of shafts is progressively diminishing. Thus a certain part of the mineshaft and of the protected area on the surface is influenced by undermining. In such a case, it is necessary to assess the expected effect of mining on the mineshaft and the surface objects in relation to the preservation of their stability. Subsequently, it is necessary to carry out direct measurements of movements, and, if the case may be, deformations both in the shaft and on the surface objects in which machinery is usually placed. The above-ground building of shafts is equipped with a mining facility and it is necessary to provide for its safe operation. The manufacturer of the mining facility being part of the headframe of working shaft no. 6 states that it is safe to operate the mechanical and electrical parts of the mining machines up to the inclination 5 mm/m of the headframe. This paper gives potential methods for determining the inclination of the headframe of the working shaft and the results of the measurement of the verticality of the headframe of working shaft no. 6 at the Lazy site in the years 2013 to 2015. The measurement of the verticality of the headframe of working shaft no. 6 was carried out by projecting a point stabilised in the upper part of the headframe to a scale placed in the lower part of the headframe. The measurement of deviations was carried out from two directions perpendicular to one another. The result is the determination of the values of inclination, the stability of the headframe of the working shaft and the stability of the machinery in relation to their safe operation. At the same time, an estimate of the accuracy of the measured values of deviations was made, as well as that of the accuracy of the determined inclination of the headframe of the working shaft.

Publication Impact Profile

PlumX
  • Captures
  • Mendeley - Readers: 1
PLUMX see details

Publication details

Title
VERTICALITY OF THE HEADFRAME OF WORKING SHAFT NO. 6 AT THE LAZY SITE
Authors
Eva Jirankova, Roman Kapica, Dana Vrublova
Proceedings
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publisher
STEF92 Technology
Year
2017
Pages
765-772
SWS Citekey
Jirankova20179765772
ISSN
1314-2704
ISBN
978-619-7408-02-7
Language
en
Publication type
Conference Paper
Keywords
influenced by underminingheadframe of working shaftinclination
References0
0references registered for this publication

Structured references will appear here after the reference import pass. The count is preserved now so the scholarly record is not incomplete.

View or Download full articleAccess options
Full paper accessChoose SWS login, librarian support, or instant article download.

SWS access login

Login as SWS Scientific Committee

Authors and approved SWS contributors will read and export their own linked papers after identity matching by SWS profile, email and SGEM GlobalID.

For librarian assistance: [email protected]

Purchase Instant Access

48-hour online accessComing soon
Online-only accessComing soon
Download the full article in PDF formatEUR 35
  • Article can be downloaded after successful payment.
  • Article may be used according to SWS library access terms.
  • Article cannot be redistributed.
Get full paper

Back to publication list