Scholarly record

SINGLE STEP METAL AND SULPHATE PRECIPITATION, A PARTICULAR SUITABLE MINE WATER CASE

Laurentiu Razvan Dinu

Abstract

Sulphate precipitation from mine water as ettringite, Ca6Al2(SO4)3(OH)12пїЅ26H2O, is generally indicated to be implemented as a second treatment step, following the heavy metal precipitation or as a third step, after gypsum seeded crystallization. The whole process may be seen as complicated by the operators, which always prefer simpler flow sheets, with fewer steps and with lower investment cost, but this treatment process sequence is justified by sludge management depending on type and by the economic reasons related to the aluminium required input. However, for some mine water sources, a single step precipitation process can be considered, specifically for sources with sulphate concentration below 2000 mg/L, out of which those containing more than 50 mg/L of aluminium, are of special interest. Single step metal and sulphate ions precipitation can have the benefit of using the aluminium already present in the mine water for the ettringite formation. This was experimentally tested for a Romanian mine water source having typically 350 to 500 mg/L iron, 80 to 100 mg/L aluminium and sulphate below 2000 mg/L. Results for continuous flow reaction system and batch laboratory tests were similar, leading to the conclusion that aluminium from the mine water is responsible for a relevant proportion of the precipitated sulphate. Of certain interest is the settling behaviour of the composite sludge, consisting of metal hydroxy compounds and ettringite.

Publication Impact Profile

• Captures
• Mendeley - Readers: 1

PLUMX see details

DOI resolver: doi.org/10.5593/sgem2017/51/s20.112

Publication details

Back to publication list