Scholarly record
INCREASING THE EFFICIENCY OF DRILLING BIT USE IN HARD ROCKS BY HIGH-QUALITY PERFORMANCE OF A DIAMOND-CARRYING MATRIX
Abstract
The work is devoted to the study of the effect of powdered WC monocarbide of different grain sizes, introduced into the composition of the binder of diamond grains of the composition 94 WC + 6Co + Cu in the manufacture of a diamond-bearing matrix of BS-NQ drill bits with a diameter of 75.6 mm, designed by ISM (Ukraine). The effectiveness of the mentioned crowns was evaluated according to the proposed indicator F= ( - mechanical drilling speed; h - the value of the deepening per single experience, - - linear wear of the matrix in height). Experimental drilling on granite blocks showed that with an increase in grain size from 80/63 to 200/600, the efficiency index increased by 1.9 times, and an increase in the percentage of monocarbide from 6% to 12% increased the F value by 10-12%. A further increase in grain size up to 250/200 caused a sharp decrease in the mentioned F index. It has been theoretically and experimentally shown that the use of a "comb" profile of the working end of the matrix in the design significantly (by 2 times) increases the rate of destruction of the face in comparison with a rectangular end. To further increase the efficiency of working on the destruction of the face, it is necessary to create diamond crowns, the matrix of which in height consists of several impregnated layers with a comb profile, separated from each other by layers of material of lower hardness (for example, VK-20).
Publication Impact Profile
- Citations
- Scopus - Citation Indexes: 2
- Captures
- Mendeley - Readers: 3
Publication details
References14
Bousser E., Benkahoul M., Martinu L., Klemberg-Sapieha J. E. Effect of microstructure on the erosion resistance of Cr-Si-N coatings. Surf. Coat. Technol. 2008. Vol. 203. P. 776-778. DOI: 10.1016/j.surfcoat.2008.08.012
Hassani S., Bielawski M., Beres W., Martinu L., Balazinski M., Klemberg-Sapieha J. E. Predictive tools for the design of erosion resistant coatings. Surf. Coat. Technol. 2008. Vol. 203. P. 204-210. DOI: 10.1016/j.surfcoat.2008.08.050
Mechnyk V.A. Regularities of structure formation in diamond�Fe�Cu�Ni�Sn�CrB2 systems. Mater. Sci. 2013. Vol. 49, no. 1. P. 93�101. DOI: 10.1007/s11003-013-9587-1
Gevorkyan E., Mechnik V., Bondarenko N., Vovk R., Lytovchenko S., Chishkala V., Melnik O. Peculiarities of obtaining diamond�(Fe�Cu�Ni�Sn) hot pressing. Functional Materials. 2017. N 24. P. 31�45.
Mechnik V. A., Bondarenko N. A., Dub S. N., Kolodnitskyi V. M., Nesterenko Yu. V., Kuzin N. O., Zakiev I. M., Gevorkyan E. S. A study of microstructure of Fe-Cu-NiSn and Fe-Cu-Ni-Sn-VN metal matrix for diamond containing composites. Materials Characterization. 2018. N 146. P. 209-216. DOI: 10.1016/j.matchar.2018.10.002
Fedorov B.V., Kudaikulova G.A., Ratov B.T. Improvement of diamond crowns for drilling hard abrasive rocks. SB. "Rock�crushing and metalworking tools - technique and technology of its manufacture and application". Issue 16, Kiev 2013, pp. 26-32.
Kudaikulov S.K. Drilling wells in difficult conditions with shells with removable core receivers. Almaty, KazNTU, 2010.
Soloviev N.V., Chikhotkin V.F., Bogdanov R.K., Zakora A.P. Resource-saving technology of diamond drilling in difficult geological conditions. M: ��������, 1997.
Preliminary patent of the Republic of Kazakhstan No. 1358 K.L.E 2110148. Diamond drill bit. S.K. Kudaikulov, B.V. Fedorov, A.Kasenov. publ. 15.10.2003, Byul No. 10.
Preliminary patent of the Republic of Kazakhstan No. 17379 K.L.E 2110148. Diamond drill bit. S.K. Kudaikulov, B.V. Fedorov, A.Kasenov. publ. 15.10.2006, Byul No. 5.
Ratov B.T., Fedorov B. V., Khomenko V.l., Baiboz A.R, Korgasbekov D. R. Some features of drilling technology with PDC bits // Naukovy Visnik National Hirnohoho University, 2020, Vol.3. pp. 13-18, DOI: 10.33271/nvngu/2020-3/013
Fedorov B., Ratov B., Sharauova A. Development of the model of petroleum well boreability with PDC bore bits for Uzen oil field (the Republic of Kazakhstan) // Eastern-European Journal of Enterprise Technologies, 2017, Vol. 87, no. 3/1, pp. 16 � 22. DOI: 10.15587/1729-4061.2017.99032
Buravleva A.A., Fedorets A.N., Vornovskikh A.A., Ognev, A.V., Nepomnyushchaya V.A., Sakhnevich V.N., Lembikov A.O., Kornakova Z.E., Kapustina O.V., Tarabanova A.E., Reva V.P., Buravlev I.Y. Spark Plasma Sintering of WC-Based 10wt%Co Hard Alloy // A Study of Sintering Kinetics and Solid-Phase Processes, Materials, 2022, Vol.15, pp. 10�91. DOI: 10.3390/ma15031091
Rasulov S. R., Hasanov G. T., Zeynalov A. N. Acoustic testing of rheological properties of oil in borehole // News of the National academy of sciences of the Republic of Kazakhstan series of geology and technical sciences, 2020, Vol.2, no.440, pp.141 �147. DOI: 10.32014/2020.2518-170X.41
View or Download full articleAccess options
SWS access login
Login as SWS Scientific CommitteeLogin as SWS Scientific PartnerLogin as SWS AuthorAuthors and approved SWS contributors will read and export their own linked papers after identity matching by SWS profile, email and SGEM GlobalID.
For librarian assistance: [email protected]
Purchase Instant Access
- Article can be downloaded after successful payment.
- Article may be used according to SWS library access terms.
- Article cannot be redistributed.