SWS Academic Research eLibraryEarth & Planetary Sciences

Scholarly record

EXPERIENCES WITH CUPOLA SLAG USING BY CONCRETE PRODUCTION

P. Demeter, D. Baricova, A. Pribulova

First published: 2009DOI pendingView metrics

Abstract

Slag are by-products by metallurgical processes. The most famous slag are blast furnace slag and steel slag. Their treatment and using are known and their using is very extensive. Cupola slag formats by cast- iron production in cupola furnace. In some countries it is used by roadway building but in Slovakia it is waste only. In some European countries it is granulated and granulation product is used in building industry. Cupola slag is after tipping from cupola furnace casted in to slag dip and put in to waste depot. Cupola slag properties are similar with blast furnace properties and it was reason why cupola slag was used as a replacement of blast furnace slag by concrete production. During experiments the cupola slag was grinded and milled. It was tested concrete making from 100\% of cupola slag with three different fractions of 0 – 4 mm, 4 – 8 mm and more then 8 mm and concrete production with combination of blast furnace and cupola slag (0 – 4 mm). The last series of experiments were realized with slag after stabilization.

Publication details

Title
EXPERIENCES WITH CUPOLA SLAG USING BY CONCRETE PRODUCTION
Authors
P. Demeter, D. Baricova, A. Pribulova
Proceedings
9th International Multidisciplinary Scientific GeoConference SGEM2009
Publisher
SGEM Scientific GeoConference
Year
2009
Pages
683-688
ISSN
Not available yet
ISBN
954-91818-1-2
Language
en
Publication type
Conference Paper
Keywords
blast furnaceconcretecupola furnaceproperties of concreteslag
References12

  1. Demeter P., Baricová D., Mihok Ľ., Ivan cencrete produced from the blast furn medzinárodná vedecká konferencia: Vyso

  2. 2007: Acta Metallurgica Slovaca. roč. 13, č

  3. Baricová D., Demeter P., Mihok Ľ., Kešeľ pri výrobe bezcementových betonársky konferencia : Vysoké Tatry, Štrbské Metallurgica Slovaca. roč. 13, č. 5 (2007),

  4. Superplastifikátory na báze polykarbox [cit.20.4.2009].Dostupné na internete: <htt

  5. Prevzdušňovacie prísady. [online].[cit. <http://www.stachema.sk/stachement> Recycling st classes of common usual concrete by STN n of common compact concrete with modesty on of proposal has to be set up the experiments not suitable for high quality roadway concrete atches B,C and D with content of 10, 20 and n 0-4 mm and completed with fraction 0

  6. - 4 rnace slag are possible to use for production of N PENV

  7. 206. al composition very valuable secondary raw r process of its treatment and utilization. he financial support to the Slovak Research and APVV-0180-07) ., Ivanišin P.: Influence of different factors on furnance. In: Iron and Steelmaking:

  8. 17. Vysoké Tatry, Štrbské pleso,

  9. 17.-19. októbra . 13, č. 5 (2007), s. 120-123. ISSN 1335-1532. Kešeľák P.: Zužitkovanie vysokopecnej trosky árskych zmesí,

  10. 17. medzinárodná vedecká bské pleso,

  11. 17.-19. októbra 2007, : Acta

  12. 007), s. 503-510. ISSN 1335-1532. arboxylátov do betónov a mált. [online]. : <http : // www. stachema. sk/ stachement> ].[cit.20.4.2009]. Dostupné na internete: > International Multidisciplinary Scientific GeoConfe

View or Download full articleAccess options
Full paper accessChoose SWS login, librarian support, or instant article download.

SWS access login

Login as SWS Scientific Committee

Authors and approved SWS contributors will read and export their own linked papers after identity matching by SWS profile, email and SGEM GlobalID.

For librarian assistance: [email protected]

Purchase Instant Access

48-hour online accessComing soon
Online-only accessComing soon
Download the full article in PDF formatEUR 35
  • Article can be downloaded after successful payment.
  • Article may be used according to SWS library access terms.
  • Article cannot be redistributed.
Get full paper

Back to publication list