Browse

Air injection techniques (high pressure air injection and in-situ combustion) for enhanced oil recovery (EOR) have attracted extensive attention due to its low cost. Air injection can be applied in many candidate reservoirs including carbonate reservoirs that account for a great proportion of total oil reserves all over the world. Dolomite and calcite are the main minerals of carbonate reservoirs. Therefore, it is necessary to study their effect on the oxidation of crude oil as the oxidation reaction exactly occur...

Alumina and silica are commonly used as solid matrix for characterizing the combustion behavior of crude oils by differential scanning calorimetry (DSC) technique. However, the two basic factors, heating rate and total sample mass, were paid less attention in the process of experiments. Our recent study found that they might significantly change the oxidation behavior due to the use of alumina and silica as solid matrix. In this study, the effects of heating rate and sample mass on the combustion behavior of crude...

In-situ combustion is an effective thermal recovery process for heavy oils and natural bitumen. It is widely accepted what the success of an in-situ combustion depends on a stable combustion front. However, field and laboratory data show that combustion front is often unstable, which severely limits the wide application of in-situ combustion technique. The goal of this work is to develop oil-soluble metal-based catalyst to improve the combustion behavior of heavy oils, and thus achieve a stable combustion front. I...

Every day more than 60 tons of hydrolyzed lignin are produced only on one bioethanol manufacturing factory, 25000 tons per year. More than 1 million tons of lignin is produced by wood-recycling factories worldwide, which is being combusted to compensate energy costs or just stored as a waste. We suppose that there is a more sufficient way of its recycling and provide another way of lignin use, assuming the pyrolysis process as one of the pretreatment methods of its reproduction into more favorable derivatives. Pyr...

Foam flooding is a promising enhanced oil recovery (EOR) method for water-flooded reservoir due to its good mobility control capability. When foam is injected into oil reservoirs, it will contact with oil, and oil will affect the performance of foam. Therefore, the effect of oil on the properties of foam has always been a key research topic for foaming flooding, but it is also a very controversial subject. Many researchers reported that the presence of oil is detrimental for foam stability, but some others believe...