Browse

This article is devoted to transport problem, which is one of the main problem of any logging company activity. On fifth all the world?s volume of woods belongs to the Russian Federation. Due to the fact that cutting fund is distributed an unevenly and a part of it is in hard-to-rich places it is use is not effective enough. Approximately 40-70 cubic meter of potential raw material per hectare remains at cutting area. Cutting waste and felling residues great removal is considered to lead to transport costs in Russ...

The placing engineering-technical objects lead to the necessity of the development and of the applying of the protective and of the preventive of measures in areas with increased geodynamics (karst, landslides, mudflows, etc.). One of the measures is the application of systems of the geodynamic control to prevent of the negative development of geodynamics. However, the development and the introduction of systems of this class are associated with the low methodological study of problems of the control of probabilis...

In this article, mathematical and full-scale modeling of the application of the resistive control method based on the phase-metric principle of the controlling of the growth of suffosion processes is considered. The causes and stages of the growth of suffosion processes are given. Modeling of suffosion processes is carried out on the basis of the geoelectrical model of a spherical cavity of a covered thickness of soil sediments. The description is given of the experimental setup for modeling the suffosion processe...

The paper presents observations of solution of the sustainable forestry problem in terms of the Arkhangelsk region. One of the sustainable forestry guidelines is appropriate restraining of the forest harvesting. The volumes of logging in the Arkhangelsk region constitute about half of the allowable wood removal. One of the reasons of the harvesting volumes insufficiency is low density of forest roads network, therefore the accessible areas alongside the existing roads are depleted. The forest roads network should ...

This article considers the methodical provisions of geomechanical analysis of a change in the stress-strain state of the undermined saliferous mass over time. The mathematical modeling of deformation and destruction of the water-blocking strata (WBS) has been carried out in the elastic-plastic setting for plane-strain conditions (PS). The safe conditions of undermining of the water-blocking strata (WBS) have been assessed and the geomechanical justification of used additional protective measures has been made in t...

Anthropogenic load is the main cause of forest fires near settlements and various objects of transport or industrial infrastructure. It is proposed to mark out a point source of anthropogenic load. Similarity in the processes of propagation of anthropogenic load and diffusion heat transfer was used for simulations. The quantitative characteristic of the anthropogenic load is the virtual (possible) number of forest fires in a controlled forest-covered area. A one-dimensional mathematical model for estimating the sp...

The purpose of this expertise is to evaluate by mathematical modeling the stability of the slag and ash deposit Compartment II Emergency Cicani, which will be carried out on the past site of the Cicani Mid-East compartment by elevation with a height of 3,0-3,5 m, up to + 178mdMN. The deposit will be made using the "thick slurry" technology, having as foundation the deposition of slag and ash existing in the Cicani Middle + East (existing) compartment, made by the hydraulic transport technology. The basses of the e...

The article contains information on methods of agricultural products quality control, as well as on the model of a robotic complex designed for sorting potatoes. A distinctive feature of the proposed complex is using the methods of active non-destructive thermal control and technology of technical vision in the visible range of the electromagnetic spectrum, as well as in the near (NIR) and middle (MIR) ranges of the infrared spectrum. The complex is based on using a roller conveyor providing rotational and transla...

The reinforcement of ceramic composites with the help of carbon nanotubes (CNTs) is used to increase and stabilize the mechanical properties of composites based on silicon carbide, such as strength, fracture toughness and modulus of elasticity. To save the properties and reduce the synthesis temperature of ceramics based on silicon carbide, an aluminum-magnesian spinel is introduced into the matrix. A nanocomposite with a matrix of silicon carbide (SiC) and spinel (MgAl2O4) and with a CNT content of 1-3% by weight...

The article contains information on methods of agricultural products quality control, as well as on the model of a robotic complex designed for sorting potatoes. A distinctive feature of the proposed complex is using the methods of active non-destructive thermal control and technology of technical vision in the visible range of the electromagnetic spectrum, as well as in the near (NIR) and middle (MIR) ranges of the infrared spectrum. The complex is based on using a roller conveyor providing rotational and transla...

Study of wave motions fluid is one of the most important and complex problems of modern hydrodynamics. This issue is receiving significant attention in fluid mechanics, hydraulics, acoustics, oceanography and physiology of circulation. Special mention should be made of the relevance of the objectives of the movement body of finite size in fluid, ship hydrodynamics tasks, tasks construction of coastal protection, as well as the increasing interest in modeling the planet's climate. The fluid flows in the presence of...