Browse

Agricultural production as a share of gross domestic product in Latvia in the year 2016 was 3.2%, which was 1.5% more than in 2015. In 2016, the sown area of cereals amounted to 716.0 thousand hectares, which was about 43.6 thousand hectares or 6.3% more than in 2015 [1]. This indicates the development of the agricultural sector, which will require production resources, as well as appropriate technology machinery to be available. The agricultural sector has to be seen in the context of rural development, where the...

Due to the fact that the printing industry is one of the largest production departments in the EU, its impact on the environment cannot be neglected. The printing activity is based on the use of appropriate substances and chemical preparations. They occur mainly at the stage of preparing printing material and subsequent printing. Chemical and photochemical processes occurring during printing, the use of water and air for cooling machines and devices as well as production wastes - these are factors that may affect ...

The process of underground hard coal exploitation is accompanied by the release of methane. This phenomenon has been present in the majority of Polish hard coal mines, with the intensity of methane release from hard coal seams exhibiting a growing trend on a year-by-year basis. The highest amount of this gas is emitted into the atmosphere, with only a small part being collected by methane drainage systems and subsequently used for industrial purposes. In 2017, all the hard coal mines in Poland released 611.15 mill...

This paper presents the comparison of selected elements of a single-family building in light clay and traditional technology. The advantages and disadvantages of the properties of several materials used in both technologies are described. Moreover, the history of building using clay and its modern construction application, as well as an overall view of the qualities and varieties of the use of clay as a building material in combination with straw and other elements were showed. The selected object was one of the c...

The research is focused on the elemental composition of humic acids (HAs) extracted from sapropel found in lakes of the Middle Priobye and the southern Ob-Irtysh basin of West Siberia. Particular attention is given to the fact that sapropel samples were formed under various hydrothermal and environmental conditions. The peculiar features of HA elemental composition, which are evident in element content, atomic ratio and oxidation degree, were revealed. They indicate the relationship between aromatic and aliphatic ...

Currently, it is possible to capture geospatial data, which represents terrain surfaces in the form of point cloud, by using two diametrically different technologies: laser scanning and ?structure from motion? technology which is based on sets of properly acquired 2D photos. Both of these technologies allow to obtain a substantially the same product - point cloud, although it is a direct measurement product from laser scanning technology (TLS), while in the case of the structure from motion technology it is a deri...

Municipal waste sludge belongs to a specific type of wastes formed in a process of mechanical, biological and chemical treatment of wastes. The sewage sludge, due to its variable content, constitutes a big problem with respect to optimum and safe sludge management. There is no single correct way to treat sewerage sludge. One needs to remember that the selection of the management method of the formed sludge is individual and depends to a large extends on the size of particular waste treatment plant. A subject of te...

Technical progress in the field of 3D modelling resulted in increasing use of such technics to create a virtual 3D models of objects. Three-dimensional spatial models are used in a wide range of applications such as inventorisation of architecturalconstruction, an inventorisation of archaeological sites, medicine and wide-known engineering. Spatial models are created based on the point clouds acquired with laser scanners or photogrammetry. Each of these data acquiring methods has its advantages, limitations and ac...

The Verkhoyansk fold-and-thrust belt (VFTB), composed of terrigenous-carbonate rocks of the Upper Proterozoic, Paleozoic and Mesozoic age and formed in the Late Mesozoic time, stretches along the north-eastern and eastern framing of the Siberian platform. Studies were carried out (from south to north) in the Kuranakh and Kharaulakh segments of the Western-Verkhoyansk sector of VFTB and in the Olenek sector of VFTB. Structures of the Kuranakh and Kharaulakh segments have submeridional strike, and the Olenek ? subla...

In the paper, the comparative analysis of results of the research concerning energy con-sumption of separation process and influence of operational parameters is presented. Results are acquired basing on experimental and computational research. Scope of the analysis is stated within cascade system with lack of gas recirculation and membrane system with gas recirculation. Investigation is performed using UBE NM-BO2A capil-lary polymer membrane. In the paper, operational characteristics of compared systems, obtained...

The breeding value of the selection candidates is the criterion on which the best individuals are retained for breeding, corresponding to proportion of the selected individuals. When the livestock is grown in an ecological system, the only leverage by which meat production can be increased is the use of the individuals with the highest genetic merit. The average of breeding values of selected individuals coincides with genetic progression on generation, implicitly with the growing production in the considered trai...

One of the most important problems in the socio-economic development of the adjacent territories of Russia, China and Mongolia is water supply. Russian regions, including the Republic of Buryatia, the Trans-Baikal Territory and the Amur Region, are characterized by sufficient reserves of water resources, relatively evenly distributed over the territory. The structure of water use in the regions is dominated by energy and also in the Trans-Baikal Territory and the Amur Region large volumes of water consumption are ...

The buildings and services sector accounts for about 40% of total EU energy consumption, in particular residential heating accounting for 78% of this consumption. Increasing the energy performances of buildings, together with the effort to mitigate greenhouse gas emissions and, implicitly, climate change are the main directions of intervention of worldwide energy strategies. In the context of a process of global energy transition, Romania - as a member of the European Union, also is engaged in a policy of changing...

An actual problem of the bread making industry is represented by the final properties of the desired product. This fact requires a well knowledge of the technological process, the properties of the flour used, the proportions and the dough mixing method, factors that contribute to the desirable properties of the final products. This study aims at comparing the two basic methods of dough obtaining ? the direct method and the indirect method, with direct reference to the dough improved with lentil flour in addition ...

An actual problem of the bread making industry is represented by the final properties of the desired product. This fact requires a well knowledge of the technological process, the properties of the flour used, the proportions and the dough mixing method, factors that contribute to the desirable properties of the final products. This study aims at comparing the two basic methods of dough obtaining ? the direct method and the indirect method, with direct reference to the dough improved with lentil flour in addition ...

The Reactor Building NPP is a unique structure and has a complex nature of interaction with the soil foundation of various types. The complex nature of interaction is primarily due to the high load (approximately 0.6 MPa), behavior of the foundation slab as a fully rigid stamp, large load transmission area (6400 m2), and a long period of the building operation (at least 80 years). The main characteristic that describes interaction between the building and the soil foundation is the settlement whose maximum values ...

The tanning industry aims at converting the raw hide or skin (a putrescible material) into leather. At each ton of raw hides results 200-250 kg leather, while the untanned solid waste as organic fractions is around 500-600 kg. According to the EU policies on Green and Circular Economy the Action Plan covers the whole cycle: from production and consumption to waste management and use of secondary raw materials. In contrast with the traditional, linear ?extract-transform-use-dispose? economy model, the circular mode...

The tanning industry aims at converting the raw hide or skin (a putrescible material) into leather. At each ton of raw hides results 200-250 kg leather, while the untanned solid waste as organic fractions is around 500-600 kg. According to the EU policies on Green and Circular Economy the Action Plan covers the whole cycle: from production and consumption to waste management and use of secondary raw materials. In contrast with the traditional, linear ?extract-transform-use-dispose? economy model, the circular mode...

The aim of this paper is to analyse the structural, physical and biochemical features of Prunus spinosa fruits harvested from different locations in the N-E region of Romania. Fruits samples have been analysed through specific techniques and methods of the light microscopy. For the comparative description of the epi- and mesocarp from harvested fruits, measurements for specific parameters were made using the Minitab 18 software. Physical and biochemical parameters analysed were: the height of the fruit; the diamet...

The aim of this paper is to analyse the structural, physical and biochemical features of Prunus spinosa fruits harvested from different locations in the N-E region of Romania. Fruits samples have been analysed through specific techniques and methods of the light microscopy. For the comparative description of the epi- and mesocarp from harvested fruits, measurements for specific parameters were made using the Minitab 18 software. Physical and biochemical parameters analysed were: the height of the fruit; the diamet...

The porphyry copper Malmyzh deposit is situated in the Russian Federation (Khabarovskiy kray). An oxidized ore sample from Malmyzh deposit with 0.8 ppm gold content was obtained and research of gold leaching of gold from oxidized gold-copper ore was carried out. Starved cyanide concentration solution and extended concentration cyanic solutions were tested. Results were compared with non-cyanic lixiviants. Sodium bicarbonate and chloride leach solution were activated with electrolysis and UV-radiation. Theoretical ...

Applying iterative techniques to relatively simple ventilation networks, involves a considerable volume of mathematical calculations. For systems encountered in practice, the iterative methods become impracticable if the repeated calculations are to be performed manually. Computers can provide help in calculating mesh correction factors, respectively in calculating the branch flow rates. However, the number of iterations to be applied, along with organizational arrangements for mesh selection and network upgrading...

Up until the invention of electronic distance measuring devices, in geodetic networks observations were made on the tracks (directions) between points, while the distance was measured only between the points representing the base (or the bases - in the case of the constrained networks). Even after the development of these tools, for a good period of time, we continued with observations on the directions given the size of the instruments and the cumbersome methods of making observations to determine the distances. ...

At present, the monitoring of forest areas is a national requirement. The importance of protecting forests in mitigating climate change is well known. On the other hand, the economic aspects involving the efficiency of forest management imply correlation with the growing demand for wood on the market. From this point of view, the inventory and the evaluation of the rate of growth and yield of forest areas is extremely important. Estimating the growth rate per unit of hectare and the level of production of wooded a...

The quality of water sources used for drinking water production is highly varied. Many problems arise in groundwater due to the content of hydrogen sulfide and ammonia. Thei presence of its in water affects the organoleptic properties, in disosolved form the hydrogen sulphide confering undesirable taste and irritating rotten egg smell which make it unpalatable. Ingestion of sulphides through drinking water can result in stomach discomfort, nausea and vomiting. Ammonia in concentration above 1.5 mg/L can cause odou...

The results of refractory sorption tailings biooxidation and gold extraction from are presented. Selected of a representative sample and the phase composition of sorption tailings of the gold extraction plant LLP В«Altyntau KokshetauВ» was studied. According to the research it was found that the composition of the test sample contains Au-3.24 g/t; Ag ? 2.1 g/t. The content of sulphide minerals is 32%, when the main sulfides are arsenopyrite 22.7% and pyrite 9%.A large part of gold, which is about 68.9%,is able in ...

Biomass is one of the most promising renewable energy sources that could contribute to sustainable energy supply including the reduction of greenhouse gas emissions. Russia has a huge potential for producing biofuel from wood raw materials. However, forest bioenergy is now at the first steps of development. In this regard, the problem of effective choice of the suitable wood fuel supply chain is very significant. A toolset of decision support systems for wood harvesting and forest bioenergy logistics has been deve...

Chitosan is a natural polymer very widespread in the animal world, particularly in marine organisms. This biopolymer has three reactive groups in each glycoside unit of the polymeric chain: an amino group and two hydroxyl groups, which determine its characteristics. Between these groups, the most important is the amino group, which is responsible for the cationic nature of biopolymer and which gives its biological properties, as well as certain physical - chemical characteristics, such as solubility (at pH = 6 ? 6...

This study has its aim to compare the performance of modern structured and unstructured catalysts in a dry reforming of methane (DRM). DRM is used to obtain a mixture of H2 and CO with almost equal fractions of both products, which is subsequently used in synthesis of some chemical valuable products. The kinetic scheme for tungsten carbide (WC) catalyst was taken from the literature. Using the experimental data for a fixed bed catalyst, we have fitted the parameters of the kinetic scheme of DRM on WC catalyst. The...

In the current work, a series of poly(sodium acrylate)-co-acrylamide (polyNaA-co-AAm/pectin and polyNaA-co-AAm/bentonite) superabsorbent composites were prepared using pectin, bentonite, acrylamide and acrylic acid (AA) in the presence of N,N-methylenebisacrylamide (MBAAm) as cross-linker and a mixture of ammonium persulfate and TEMED as initiator. The structure and sorption capacity of the developed composites were characterized by Fourier transform infrared spectroscopy (FTIR), voltammetry and UV-visible spectro...

Rehabilitation techniques ?weld toe grinding? and ?WIG remelting weld toe? have an beneficial influence on the increase of the fatigue life of welded structures by reducing the stress concentrators at the intersection between filler and base material. This stress concentrators reduction is achieved by increasing the radius of the connection between those two elements of the welded joint, horizontal and vertical plates. From those two techniques mentioned above, the technique that causes the greatest fatigue life i...

Variable stresses where the load value varies between a maximum and a minimum value, or varies the position in time, cause after accumulating a large number of load cycles in those structures, the fatigue failure. Fatigue is characterized by failure on values of the applied stress from the load cycles, below the material yield, values which in case of static stress would not have caused problems. Knowing that the variable stressed structures are sensitive to stress concentrators, the paper aims is to highlight the...

Manuscript is devoted to comparative analysis of digital elevation models (DEMs) derived from data collected on the city road interchange of the Almaty by different methods. Nowadays this is an actual theme for the Almaty city, as the growing metropolitan area. Specifically, there is a traffic flow increase every year, and therefore it is necessary to solve the problem of the city?s road load by building new city road interchanges with greater capacity, at the same time, and to increase efficiency of existing road...

Combustion wastes, such as fly ashes and slags, can be recycled primarily by using them in road construction. Nonetheless, their potential negative impact on the environment cannot be omitted. In practice, a number of methods are used for the leaching characterization of wastes, including the standards of the European and US Environmental Protection Agencies. The studies, the results of which are presented in this article, were performed for fly ashes and slags from coal combustion and for fly ashes from combustio...

The analysis of bottom sediment quality is an important yet sensitive issue. The anthropological influences (i.e., urban, industrial and agricultural activities) as well as the natural processes (i.e., changes in precipitation amounts, erosion and weathering of crustal materials) degrade surface water quality and impair its use for drinking, industrial, agricultural, recreational and other purposes. Due to spatial and temporal variations in water chemistry, a monitoring program that provides a representative and r...

All building materials contain more or less natural radioactivity. The recycling of waste by-products, nowadays, gaining more and more importance, research on that kind of materials is being carried out and such materials are utilized as additives in the production of special mortars in many countries. As radiation of terrestrial origin in buildings does not only originate from the soil, but also from the used building materials, a greater absorbed dose rate can be measured within buildings. EU technical guidance ...

The paper deals with comparison of selected capacity calculations for roundabouts used in the Czech Republic. Some traffic engineers use the qualitative methods based on Germany methodology HBS, but some ones still use the quantitative methods for capacity assessment of roundabouts. The quantitative methods are based on the traffic volumes on entries and circulatory roadway of roundabout and they usually use an array of coefficients which represent next roundabout parameters. The qualitative methods are also based...

Detecting objects in images is of widespread interest due to a large number of applications in diverse disciplines, including remote sensing, medical images, geology and civil infrastructure. This paper presents a comparison of selected techniques that may be useful for the object detection connected with ground deformations within large areas using satellite radar interferometry (DInSAR, Differential Interferometry Synthetic Aperture Radar) techniques. The DInSAR method, that exploits two SAR images, derives info...

An explosion occurred at the ammunition storage depot in Padjene, Croatia, on 13 September 2011, caused by a fierce forest fire. The depot was totally destroyed and unexploded ordnance left scattered around it. A digital surface model and highresolution georeferenced ortho-mosaic were produced to monitor the cleared site of the former depot for remaining explosive devices and other waste generated by the explosion. Airborne image collection in 2015 covered the Padjene depot and vicinity with very high-resolution i...

At present, biotesting methods are widely used to assess the toxicity of environmental objects. Priority environmental pollutants include heavy metals and phenolic compounds. The aim of this work is to compare the sensitivity of biotesting methods to determine the toxicity of waters containing heavy metals and phenolic compounds. To achieve this, biotesting methods based on the survival of Daphnia magna crustaceans, changes in the intensity of bioluminescence of the saccharifying bacteria (the "Ecolum" test system...

Climate reconstruction in the Holocene for the Russian Central Chernozemic region with use of palynological and soil research of deep cores in floodplain deposits and archaeological monuments are carried out. In the Preboreal period area was covered by meadow and grass steppes, pine and birch forests were locally spread. In the Boreal period they were dominated, broadleaved species were noted in small content at its beginning, in its middle span oak and hazel appeared, in the final phase ash and maple added. In th...

Complex of researches (chemical, mineralogical, X-ray phase, rare-earth, isotopic analyses) of volcanogenic-sedimentary rocks, composing basal horizon of the Osipayskaya formation of the Carnian stage in the middle course of Lena river ((Bulkur anticline) (Grakhanov, Smelov 2010, Proskurin et al, 2012), where diamonds of V and Vii variety according to L.Y. Orlov classification, was performed. Granite, ilmenite, spinellide, rutile are identified in rocks among minerals of heavy fraction. According to X-ray phase an...

In the case of the close location of various engineering structures to the place of drilling and blasting operations for ensuring the preservation of these structures there is a necessity of the accurate forecast of the level of possible seismic effects. The amplitude of seismic vibrations is influenced by many factors that are not considered in the regulatory method of determining seismically safe distances. Therefore, the only reliable approach to an accurate prediction is the direct instrumental measurements. T...

The purpose of the research is determination and comparison of the porosity values of the whole core obtained by nuclear magnetic resonance (NMR) and X-ray computed tomography (CT) methods. To achieve the purpose of the research, it was necessary to solve the following tasks: a) measurement of porosity of a whole core by NMR; b) obtaining core porosity values using X-ray CT; c) comparison of the obtained values, explanation of the differences in the porosity using these two methods; d) proposal of new approaches i...

This work is initially devoted to study the cracking behaviour of a small composite wind turbine blade. In order to choose material, the blade is manufactured by different materials (glass/epoxy, carbon/epoxy, Aluminium, and PVC). Considering loads and boundary condition, we study in static analysis the stress, strain and displacement, in dynamic analysis the modes shape and naturals frequencies, in fracture analysis the stress intensity factor, crack initiation and crack growth in order give the results by finite...

Due to the increased consumption of S420NL thick steel plates, the world steel price is expected to decrease. The main purpose of this investigation is to find an optimal solution both from a technical and commercial point of view to produce heavy plate 40 mm thick microalloyed S420NL hypoeutectoid steel. The imposed resistance class for this alloy is 420MPa with proven tenacity properties at temperatures up to-50 В°C. The experiment encompasses the necessity of defining a metallurgical route including chemical co...

The aim of the work was the creation of multicomponent protein composition with predetermined biological value and higher functional properties than the original plant based protein products. Initially, studies was made on the extraction of protein concentrate from defatted amaranth flour, for which were studied the fractional protein composition, solubility in various solvents, and the effect of cellulolytic and xylanase enzymes on the yield of proteins from amaranth flour . Were chosen the most effective solvent...

The aim of the work was the creation of multicomponent protein composition with predetermined biological value and higher functional properties than the original plant based protein products. Initially, studies was made on the extraction of protein concentrate from defatted amaranth flour, for which were studied the fractional protein composition, solubility in various solvents, and the effect of cellulolytic and xylanase enzymes on the yield of proteins from amaranth flour . Were chosen the most effective solvent...

The article describes the newly diagnosed incidence of the musculoskeletal system in the regions of the Republic of Kazakhstan (East Kazakhstan region) with the identification of risk levels, mapping, correlation of environmental factors and clinical and laboratory data on osteopenia diagnostics with the Omnisense-7000. A high incidence rate was detected in the Borodulikha district, close to the former Semipalatinsk nuclear test site and in the industrial city of Ridder, the center of the mining and metallurgical ...

The article deals with the problem of embedded computing systems testing and debug. The embedded systems design process, actual problems and existing solutions are analyzed from this perspective. The method of testing and debug based on model-oriented record and replay of the computational process is proposed, as well as the corresponding specification model for real-time computational processes. The specification model is a modified control flow graph. The key advantage of the proposed method is an abstract defin...