Browse

The need of real publication and distribution of the data from the cadastral systems more emphasized dictate adequate engagement of methodology and algorithms for registration of constrictive components which helps discretization of space phenomena and events. Within the turbulent ideas the cadastral systems which are functionally based on 2D treatment of property units do not have ability to accept and fulfill complex constructive segments and their contacts whit the close surroundings. This is only a part of the...

Authors consider a damage in a building excavation, which took place in June 2005 at the environs of Sofia. The slope of the excavation is protected by anchors and protective net but after the heavy rains during the whole month of June 2005 it begins to degrade. An emergency additional strengthening is made and the degradation is stopped. The paper considers the reasons for the damage and outlines the results of the investigations and laboratory tests made afterwards. The specific characteristics of the soil that ...

This study was aimed to determine the levels of blast-induced vibrations at BayД±rk\"oy town situated in the boundary of BeЕџikd\"uz\"u and being said to be affected by the blasting generated at Korkuthan Quarry being located at the edge of Akhisar Brook in BeЕџikd\"uz\"u in Trabzon. Korkuthan Quarry has assured riprap materials for filling the sea and sea fortification for the construction of Espiye-\cCarЕџД±baЕџД± coastal highway (including Giresun coastal highway) at the scope of The Black Sea Coastal Way Rehab...

Global Navigation Satellite Systems (GNSS) (predominantly GPS carrier phase-based positioning) are used today more and more in various areas of geodesy and surveying. In order to determine the position of a large number of points as quickly as possible, GPS RTK (Real Time Kinematic) surveying method is the most productive one because the coordinates are obtained in real time directly in the field and involve occupying points for a short period of time. Because point positions with high precision are immediately kn...

‘Mapex’ JSC is a major geo-informational company in Bulgaria. Its main activities are in the area of geodesy, structural planning and specialized software development, based on GPS technologies. The purpose of this summary is to briefly acquaint the participants in the “6 International Scientific Conference – Modern Management of Mine Producing, Geodesy and Environmental Protection - SGEM 2006” with th some of the major projects of Mapex JSC, implemented through GPS technologies, as well as with those pr...

It was successfully completed the first stage of the development of a multi-functional network of permanent GPS base stations in Bulgaria. The network receives and monitors the satellite signals from both the American network GPS and the Russian network GLONASS. The developed network allows the user to operate in real time as well as in post processing mode contributing significantly for the improvement of the measurement accuracy of the used GPS/GLONASS receiver. The system enjoys a widely spread application in f...

In the upper part of the EarthВґs atmosphere, the ionosphere, the free-electron and ion density is high enough to influence the propagation of electromagnetic waves. The ionosphere is a dispersive medium for the observables of all space geodetic techniques operating in the microwave band and disturbs both, their group and phase velocity. The effect is in first approximation proportional to the so-called Slant Total Electron Content (STEC) along the ray path and can be corrected if the measurements are carried out ...

A method for dam deformation investigation, based on the deformations-theory and on the finite elements method, is proposed. The practical application of the method for a real object – Ognianovo dam is shown. Principles for changing geodetic measurements for dam deformation monitoring in order to provide better results from applying deformation analysis are suggested.

Mechanical size reduction by using crusher and grinding mill is widely used in the aggregate producing industry and the mineral industry. In this study, physical, mechanical crushing and grinding properties of the rock specimens obtained from different bedrock were determined by using 8 different tests, to characterize the relationships between physico-mechanical properties of rocks and mechanical size reduction efficiency. The rock specimens were tested according to the procedures recommended by the ISRM (1981). ...

Chadormalu Mining and Industrial Company (CMMIC) is mining Chadormalu Iron Ore deposit in Yazd province, central Iran by using conventional open pit mining method. The final pit will be excavated to a depth of approximately 225m with a bottom elevation of 1300m above mean sea level. According to the initial design, the inter-ramp slope angle of 55В° with a 30m bench height, a catch bench width of 10m and 70В° slope angle of individual benches were proposed. Mining to date has intersected complex geology and areas ...

The Saghez shear zone is part of metamorphic belt of the Sanandaj-Sirjan zone in northwest Iran that uplifted during continental collision between the Afro-Arabian continent and the Iranian microcontinent. The mine is being exploited by open-pits mining, with present reserves estimated at 3.2gr/t gold. The currently favored genetic model is an example of porphyry system, with mineralization being closely to shear bands and emplacement of granit and pegmatitic veins. Rocks from Sagez shear zone consist of metavolca...

The paper presents principles and conditions of leakproof yards construction located on the inside dumps of open pits. The dump soils used as the facility foundation were described. The requirements concerning the mineral soil used for sealing beds according to the EU regulations, were presented. Based on the case study, the method of forming the sealing bed and all necessary methods of its maintenance are showed. The results of filtration coefficient measurements on the laboratory and field scale as well as reaso...

GPS technology in geodesy is using for positioning of the geodetic points and the points from geodetic surveying in global coordinate system WGS84. In the Republic of Macedonia, as in the other countries of the south eastern Europe, were established GPS networks of the first range, but without increasing its density. If we have a fact that there are not astronomic-geodetic and gravimetrical measurements with the aim to define the local geoids more accuracy, it is clearly that can not be done massif and precise GPS...

A possibility for fixing of the location and approximate sizes of the terrestrial surface regions which are situated above solids with anomalous mass is considered .The precise gravimetric measurРµments are combined with observations by navigation GPS receivers for marking of the preliminary designed gravimetric stations. The interpretation of received anomalous field is preceded by an analytical removal of a regional background. The expedience of the chosen method is well founded and supported by an example of a ...

The paper presents definitions of nature risks and disasters. The mapping of the risk processes is discussed in the direction of educational purposes. International organizations publish information brochures about how to teach children correct behavior and preparation for natural disasters. Questions as “What do you do in case of an emergency” are discussed. Standards and technologies related to emergency management are considered. Some examples of maps and methods of mapping for young and older students are ...

Based on a two-level model for the zone of non-reversible deformations that is produced near mine working, bifurcation-type criterion is developed for stability of heterogeneous rock mass. A new approach to calculate parameters of mine working lining has been proposed. It is based on the treatment on energy balance of “lining-rock mass". Geomechanical criteria of mine working lining stability are obtained.

Instrument Optic Electron Service Co. (IOES Co.) is a company which distributes and supports bulgarian surveying and mine surveying market with motorized optical total stations based on laser direct reflex measurement, 3D full-panoramic long range laser scanning systems and at last but not least with effective GPS and GIS solutions. All these three separate bundles of instruments, which are also interdependent and are used for remote rapid creation of precise 3D digital models of large, hard to approach and danger...

The peculiarity of mass transfer in such environment is that motion between the outer surface of the blocks and their inside develops in time creating delay in the response of the blocks to pressure changes in fractures surrounding them. Analysis of these processes on mathematical models has determined that at a certain combination of the flow kinetic parameters a differentiation of pressure distribution in blocks and large fractures occurred. As a result, in filtering of poorly compressible fluids a pressure disi...

The main principles and methods of interactive education are discussed. The requirements to this approach of educational process are formulated. The differences between practical training and learning process are discussed. Based on these principles there are shown the examples for deductive education on processing stages in digital image processing and digital photogrammetry. Main attention is pointed to the initial data collection for purposes of inner orientation, image calibration and relative orientation of s...

In the region of Botanical Garden, BAS, Sofia, gravimetry measurements for research of the landslide processes with static gravimeter LaCoste \& Romberg G1059 are made in two epochs - 2003 and 2005. In the present paper the method of measuring, processing and analysis of the results is presented. Digital models of Bouguer anomaly, direction of gradient on Bouguer anomaly and 3D presentation of surfaces of Bouguer anomaly between two epochs are made. Conclusions about the landslide state are drawn on the basis of t...

The presented results are from two successive periods of conventional and GPS observations of the crest of Pancharevo dam. The two different kinds of observations are processed separately. The comparison of the final results is shown.

Surface faulting and distribution of surface deformation caused by the Chirpan (M6.8) and Plovdiv (M7.0) earthquakes that occurred on 14 and 18 April 1928, respectively, were used with the scope to determine the distribution of slip and confirm the fault geometry. We assumed smooth fault geometry, based on previous studies, and a standard dislocation model. The faulting zone comprises several fault segments with different slip on each of them. For structurally complex areas like our study area the best model may b...

Each of the spatial methods provides data in a different and a unique way for the three main geodetic directions: geometry of the Earth – coordinates of points and deformation; orientation and rotation of the Earth; gravity field as well as its variations. One of these methods, which is the most accurate and hopeful nowadays, is the Very Long Baseline Interferometry. In this paper it is gone into the technique of VLBI and its applications, mainly in geodesy and geodynamics. It is made an analysis of the motion o...