Browse

River hydrology is a key component in river resources planning and river engineering. Our recent study is focused on flow metrics that best describe the registered flow regime and hydrological characteristics of rivers within the Tundzha watershed located in South Bulgaria. The flow regime will be described using 5 broad categories: magnitude of river flow; frequency; duration; timing and rate of change. A special attention in the research was given to the low flows. Thirteen hydrometrics stations were selected fo...

OVERVIEW -------------------------------------- For the 22nd International Multidisciplinary Scientific GeoConference SGEM 2022 (Surveying Geology and Mining Ecology Management), for a period of 1 year and a half, were submitted more than 560 papers. After a double-blind peer review process, based on the COPE standards, only 371 of them were accepted for publication in SGEM volume 22. The accepted scientific papers, submitted by authors from 18 countries worldwide, are grouped by sections and published in 6 differ...

The Blato River watershed was determined as especially vulnerable to flood hazards zone regarding the developed Bulgarian Flood Risk Management Plans. With regard to the climate change the number of such hazards increases. To prevent and mitigate the consequences various measures are applied in practice. Some of them are connected to the implementation of already existing engineering solutions. But in case of emergency some untypical temporary solutions are also introduced. In line with the detected severe climate...

The main objective of the study is the analysis of the effects of the geological substrate and of the geomorphological diversity on the characteristics of the vegetation (the diversity of species, the diameter of the trees). The study area is made up of the Cioclovina karst area and the crystalline area near it, which are located in the Dacian Plateau in the ?ureanu Mountains. Within the study, a series of geomorphological variables were calculated to establish geomorphological heterogeneity, namely: slope, slope ...

Predictive process control is a method of regulation suitable for controlling various types of systems, which is based on the idea of using the prediction of future system behavior and its optimization. Normally, a system model is used to predict behavior, and therefore it is necessary for the correct function of predictive control to make its correct selection and determine its parameters so that the controlled system is described as accurately as possible. Another advantage of predictive control is the possibili...

DETEX Electronic Detonator made by Kirlioglu consists of an electronic circuit with communication and microprocessor and wire bridge resistance coated with explosive material. DETEX Electronic Detonator, which identity information, delay information, charge, discharge and all functions are controlled digitally, is a system consisting of all electronic circuit elements. The system consists of a communication circuit, a master control circuit with a microprocessor, a controlled charge, a discharge and an ignition ci...

Meat and bone meal (MBM) is considered animal waste and can no longer be used in agriculture since the onset of the disease called spongiform encephalopathy in cattle. This waste is burned and then dumped in landfills, which causes unwanted emissions to the environment. This is a real problem nowadays and we must find environmentally friendly solutions must be identified to eliminate this waste by energy recovery. For these reasons, a lot of processes have been developed to recovery the MBM, which are environmenta...

Air pollution is one of the most important causes of morbidity and mortality. The fact that more cities are now improving their air quality control system is good news, so when they take action to improve air quality, they set a goal accordingly. As air quality declines, the risk of stroke, heart disease, lung cancer and chronic and acute respiratory diseases, including asthma, increases in people who live in these cities. Ambient air pollution, which contains high concentrations of fine and fine particles, poses ...

In the context of the issues discussed within, it can be noted that the main objective of this paper is related to the presentation of the European Union as one of the leading producers of green cars, whose goal is to reduce harmful emissions to protect the environment. Based on the plinth thus built, the opinion of the Bulgarian consumer on the presented European initiative should be clarified. The main objective thus launched requires the consistent clarification of the following tasks: to present the European U...

The final success of the mining business is primarily based on a correct and responsible evaluation of the mining and technical conditions of mining, resp. the mining and geological conditions of the mining site concerned, and all the legal aspects involved. By evaluating these conditions, together with the optimal choice of mining procedures, it decides on the safe and efficient use of the reserved mineral deposit in the given mining area. The mining area must be delimited and determined on the basis of the minin...

The vision of succeeding in shaping sustainable cities is representing a fascinating matter, but a challenging one. This provoking issue is including several tasks, among others connected to available possibilities for assuring needed energy supply with minimum environmental impacts. Humanity innovative thinking way has always been driving the field of shaping more efficient energy supply systems with less environmental impacts, being always a debate regarding available energy resources. Conventional energy supply...

Sustainability within a region is achieved by providing a variety of services regarding the tourism products within an area. The Giurgeu basin in order to be able to sustain its values, needs to offer a wide variety of services that attract and increase the overnight stay of tourists. The services needed to be diversified with the beginning of the pandemic season of 2020 - 2022. These services existed before, but during the pandemic period, where the tourism suffered the most, it became evident that the entreprene...

The development of hypersonic technology creates a new challenge for inertial navigation sensors, which are widely used in aviation navigation systems. Improving the accuracy of navigation equipment will reduce fuel consumption and reduce the impact of harmful emissions on the atmosphere. The operation of sensors that are part of navigation systems, such as gyroscopes, work in difficult conditions, which affects their accuracy. A float two-degree angular velocity sensor is considered. The reaction of a float two-s...

The harmful effects of various air pollutants on human health, living in a polluted air environment, are relatively well proven: the morbidity of the population is increasing, life expectancy is decreasing. Suspended particulates are one of the generally recognized air pollutants. The most dangerous solid particles are released during primary combustion processes, they contain heavy metals (zinc, copper, iron, lead). Heavy metals are known to be persistent in the human body and remain for decades. Heavy metals can...

The economic results of many dynamically developing European countries largely depend on the availability of mineral raw materials. For this reason, securing their supplies from import must be supported by a committed foreign policy as well as a sustainable raw materials policy in the field of their obtaining from domestic sources, both from mineral deposits, as well as secondary and waste sources. Raw material security must be based on the diversification of supply sources and minimizing supply risks. The results...

Climate change is one of the biggest global challenges. As a result of human activity, large amounts of greenhouse gases are released into the atmosphere, contributing to global warming. Carbon dioxide (CO2) is a major greenhouse gas, therefore, hydrogenation of CO2 to value-added chemicals and liquid fuels is of great importance for a sustainable future. It is well known that iron-based catalysts can demonstrate good activity in the hydrogenation of CO2. However, catalysts need to be improved to promote the forma...

The process of anaerobic fermentation of organic waste makes it possible to produce not only methane, but also hydrogen, which, when mixed, form a high-energy mixture - biohythane. The efficiency of biohythane production in a two-stage anaerobic fermentation process depends on many factors, including organic loading rate (OLR) and hydraulic retention time (HRT). It is known that the addition of an immobilizing support materials to anaerobic bioreactors improves the stability of their operation and increases the bi...

The purpose of law 165/2013 is the identification and inventory on topographic maps of all lands owned by the public or private domain of the state and the identification of lands that constitute the available reserve of the local land commission to complete the restitution process in nature or equivalent of the real estate abusively taken over during communism. This paper aims to present the steps in verification, validation, and correction of surface topological errors for works specific to law 165/2013 using Ar...

Environmental noise can cause a negative impact on human health physiologically and psychologically, interfering with sleep, rest, concentration, communication and other activities. The article study of possible solutions on how to prevent and reduce environmental noise through governance practices in Latvia, developing strategic, practice-based model for environmental noise governance, which has not been done prior to this study. This research is based on several objectives, including a comprehensive analysis of ...

Environmental policy is a relatively young science that originated in the late 60's and early 70's. The term environmental policy is used not only to describe national, international, global, regional or local environmental policy. Today, environmental policy is formulated by a number of other entities, primarily political parties, but also entities of the business sphere or the public sector. The Industrial Revolution is considered to be a fundamental milestone in the dynamics of human society's development, scop...

-he space-time distribution of earthquakes is of substantial importance for understanding the physics of the earthquake generation process. Earthquakes can be analyzed as a time series of events that result from the released strain in the earth's crust. The study of the space-time distribution of earthquakes using statistical methods reveals many of their characteristics. Sequences of seismic events affect both spatial and time distribution of earthquakes. It is necessary to know the statistical characteristics of...

The standard procedure for fluid preservation of insects consists of two steps. First, the specimen is killed and prepared in a fixative fluid and then transferred to a storage fluid. Recommendations for using specific chemicals or mixtures differ depending on the size and anatomy of the animal and vary among the authors. However, controlled comparative studies are often missing. The ideal method should preserve the specimen-s morphology as well as its genetic information. We have investigated the effect of 12 com...

Following the increased use of sealing structures built in order to isolate historically polluted sites or to repair infiltrations inflicted to the levee of dams, it emerged the need to choose the right materials for constructing barriers using cutoff wall technique. The objective of this paper is to assess the range of suitable material combinations (water, cement and bentonite) in order to attain proper compressive strength, permeability and ductility requirements of such a structure. This paper proposes the rep...

In recent years, maritime transport in the Black Sea area, especially along the maritime transport routes that cross this area, has seen a considerable increase compared to previous years. However, navigation takes place not only in ports in Romania, Turkey, Georgia, Russia, Ukraine, and Bulgaria but also outside the Black Sea via Turkish straits, connecting with international routes. Maritime transport consists of two main components: passenger transport and freight transport, both components being directly affec...

The purpose of the analysis is to identify prospects and opportunities for the development of the oil industry of Arab countries (including Saudi Arabia, the United Arab Emirates. Kuwait, Qatar. Oman, Iraq) as well as Iran, Venezuela, Russia and some others), in the difficult post-pandemic and political conditions of 2022. In our opinion, there is a strong influence on the oil industry of cyclical and structuralcyclical fluctuations of the world economy, along with the environmental policy of the OECD countries, l...

During the process of drilling wells, it is necessary to have information about the composition of the soil layers through which the drill passes. This will optimize the parameters of rotation of the drill, the load on the drill, as a result of which equipment wear will be reduced. It will also make it possible to lay optimal trajectories during well drilling and track the penetration of the drill into the target layer. This issue is especially relevant for the oil industry, where production is carried out at grea...

Reconstruction of ports, including dredging, is intensifying all over the world. Dredging is used to dredge ports - a type of excavation that is carried out underwater or partially underwater. Dredging helps to maintain waterways and ports navigable. It is a complex process consisting of stirring, lifting, transporting and disposing of the dredged material. The material obtained by dredging may be disposed of in the vicinity of the port or transported to another location by barge or by pipes in the form of liquid ...

The global development of society requires constant updating of the objectives that education pursues and how they are achieved. Science education is an area undergoing advanced transformation, both at the level of objectives and methodologies, with a strong social, economic, and knowledge impact. Research-based education is a well-established term, especially in the higher education system. More studies and key policy documents argue that education must be based on cutting-edge research. Essential in this equatio...

The paper deals with the current state and development of smart cities in the Czech Republic in the context of sustainable mobility and transport and the improvement of the quality of life inhabited by small-scale cities. Today, cities are exposed to many challenges and are looking for new efficient transport solutions that will ease existing infrastructure, improve public space, and promote sustainable modes of transport. The growth of individual car traffic has caused numerous social conflicts and environmental ...

Computer simulation of foundry processes is an essential part of a modern foundry. The role of the gating system, its design and different elements are important in casting. Experimental verification of the designed gating system for new castings is costly, timeconsuming and economically inefficient. Therefore, these processes in the foundry are replaced by computer simulation. A detailed analysis of the simulation results makes it possible to predict various risks that may cause a failure in the quality of castin...

The processing, transport and storage of flammable materials in the form of dust generates an explosion risk due to the possibility of initiating potentially explosive atmospheres created by dust suspended in air with various ignition sources, some of which may be their own installations. As explosions can cause human casualties and severe property damage, the explosion risk assessment and the application of appropriate measures by manufacturers and users of installations to prevent the ignition of explosive atmos...

Asphalt mixtures are the most commonly used material in road construction. It is necessary to know the properties of the mixtures and their constituents, as well as the changes in properties that occur during their service life. The demands on road durability are constantly increasing. The main problem with asphalt mixtures is degradation. Due to the effects during asphalt pavement production and service, there is a gradual degradation of properties. One of the degradation factors is the impact of traffic, climate...

The impact of anthropogenic greenhouse gas emissions on the increase in the average temperature on the planet and the risk of initiating irreversible processes are recognized by most of the scientific community as real threats to humanity. Many countries have a legal and institutional framework for a consistent industrial policy taking into account the climate and environmental components, including carbon accounting. Russia is a country with high intensity of production-based CO2 emissions. In is well-known that ...

The aim of the article was to assess the importance of Natura 2000 sites in halting land take, given that the European Commission has set itself the target of reducing land take in the EU to zero by 2050. In the surveyed area, land take is primarily a consequence of the economic activities carried out and of their pace and intensity; the density of housing also puts pressure on the phenomenon through the permanent expansion of the built-up area of the settlements (the brown belt), especially in the economically ef...

Spectrophotometric methods for total protein analysis are generally simple, rapid and sensitive. Such sensitive protein assays may have applications in forensic science, in the detection of protein contaminants in drugs and in a number of other applications of research interest. Biuret reaction with proteins and peptides is widely used in clinical and biological laboratories. In this work, instead of copper sulphate, sodium hydroxide and Seignette salt, we used insoluble copper phosphate, potassium or sodium hydro...

The electrification process of the materials and technical equipment-s, especially the external parts of them, frequently occur during their use, being sometimes an intrinsic process, such as for example flowing of a flammable liquid through a pipe. The electrification process of materials and technical equipment-s is responsible for generating, through specific mechanisms, significant quantities of electrostatic charges. The presence of electrostatic charges on materials and technical equipment-s, used in areas w...

It is well known that atmospheric aerosols have both a direct and an indirect impact on the Earth's systems and have natural or anthropogenic origins. In this paper we present the results of the 2022 spring-time lidar measurements conducted within the European Aerosol Research Lidar Network (EARLINET) using a multi-wavelength Raman and depolarization LIDAR system operated in Cluj-Napoca, Romania. The Cluj-Napoca lidar system (CLOP) emission is based on a Nd-YAG laser Continuum INLITE II-30, which has a repetition ...

The unique lure of the America Cup Yachting race and the generous (read lavish) resources allocated to the research of the best ratio between design and performance in its history-loaded J-Class have defined some of the most spectacular ocean ships of the last hundred years. As a software modelling experiment, we have chosen to re-imagine an engineering journey, by redrawing with contemporary tools a graceful design of the 1930s: the Ranger F yacht that became the Lionheart vessel in 2010, after more than seven de...

The scope of environmental accounting includes waste and its neutralization. The activity is classified as a social minimum for the life of the population. The challenge is the growth of waste - household and non-household. Therefore, sustainable development, specifically - waste reduction and recovery, is identified as a center of state and municipal policy. These problems will be soEuroed by making sustainable management decisions. The solution to the problems is through the implementation of public-private part...

The main idea of the article is to assess the landscape potential for the use of renewable energy systems based on systematic and landscape-ecological approaches. In general, these approaches consist of the analysis of the features of landscape components and their impact on the redistribution of energy flows in the landscape, which in turn form the potential of renewable energy resources of each specific landscape contour. A systematic approach is to consider the holistic properties of a particular landscape in t...

Improving the performance of the gypsum binder is possible by strengthening the gypsum matrix. The increase in strength is ensured by the introduction of a complex of mineral and chemical additives. The use of waste as components of such a complex solves a set of problems. The market is saturated with competitive and high-quality materials. Designed materials meet modern requirements. In addition, the problems of waste disposal, freeing up space, environmental protection and reducing the resource intensity of prod...

The article presents the current state and views of the author in connection with the creation of a Geoinformation system for the territory of Bulgaria within the meaning of the Geodesy and Cartography Act. The provisions of this law on this issue are from its entry into force, i.e. since 2006 and so far, there is no officially published information on actions in this direction, except for the creation and maintenance of Web applications with information on materials and data from the Bulgarian Geocartfond and inf...

The research is part of the -Design of an intelligent system to forecast landslides' processes and their influence on the roads' technical and operational characteristics- project financed by the Ministry of Education and Science of the Republic of Kazakhstan by AP09260066 program. The research goal is in surveying deformed parts of -Almaty-Cosmostation- automobile road nearby critical slopes to identify in the next phases the causes of pavement degradation and formulate then the recommendation to prevent such deg...

The study of meteorological-climatic phenomena, especially of extreme phenomena that have become more and more frequent, has gained greater significance, given the increasing awareness of the importance of preventing material damage. Thus, monitoring and analysis of atmospheric risk phenomena helps local and national authorities whose duty is to protect the population and property of any kind, and early warning regarding the occurrence of such phenomena is useful to each individual. The western and north-western p...

The article justifies the need for technological solutions in the use of polymer-composite materials in order to limit the impact of dynamic frictional forces in oil drilling. The relationship between macrostructural surfaces was investigated, in particular increasing the effectiveness of the axial load on the drill bit during drilling directional and horizontal wells. It is established that the polymer coating of drill string elements (BC) based on fluoroplastic brand F-4, with a small thickness of 2 ? 3 mm and t...

Diagnostic ultrasound (US) and magnetic resonance imaging (MRI) are important medical imaging methods in modern radiology. Our research is focused on imaging brain structures in neurology. In this paper we present differences of digital image analysis of the substantia nigra (SN) between US and MRI using the same algorithm. In the past, we developed an application for analyzing substantia nigra echogenicity in BMODE US images. Our developed application is based on a principle of binary thresholding in Region of In...

The environmental management system should be considered as part of the overall management system. This involves looking at the organizational structure, planning activities, responsibilities, practices, procedures, processes and resources for developing, implementing, achieving, reviewing and maintaining environmental policy. Basic principles and requirements of the environmental management system are aimed at identifying, researching, controlling and reviewing the factors influencing the environment, which allow...

The soils potential is the result of interdependence between the characteristics of the vegetation and the natural environment, also the level of production is the result of the influence of determining factors: natural environmental factors and technological factors. The influence of biotope relief factors on the above-ground vegetation is a direct consequence of the altitudinal differentiation of climatic conditions, a vegetation layer and implicitly a rather varied and complex area soil cover. It is unanimously...

The use, production, processing and storage of petroleum products and gases generate hazardous atmospheres that can be ignited and generate explosions, causing serious damage both to materials and the environment, and especially to human health and integrity. The use of equipment in this environment requires compliance with certain well-defined parameters, which must be chosen in correlation with the potentially explosive atmosphere in which it is to be installed and the type of protection, temperature class and c...

When studying the mechanical behavior of hydrated binders, it is necessary to prevent hydration contraction tensile failure in order to properly characterize the mechanical properties of the material. This is regulated by standards for cement testing, however for the case of water-cement-bentonite mixtures the influence of standard sand is not thoroughly studied. Since the hydration shrinkage and water suction is different for cement and bentonite, a range of eleven combinations of water-cement-bentonite were used...