Browse

The article presents the possibility of application in civil engineering of highly ecological PET foam, manufactured from 100% recycled plastic packaging. It may find uses in construction of numerous engineering structures, such as pedestrian and cycle footbridges. Properly processed waste from post-consumer PET packaging may constitute a quality structural core for use in multilayered composite materials, commonly referred to as sandwiches. Their constructional function is to provide a distance between highly rig...

Underground mining operations are inextricably linked to negative impact on the environment. This impact, in particular, may result in the formation of mining damages (various types of terrain deformation) and pollution of the environment. It can also results in long-lasting changes in the landscape and environment. Sustainable management of areas degraded by mining exploitation requires an accurate stocktaking. Authors of this article presented the example of usage of GIS technology to develop a model of supporti...

This work is devoted to the synthesis and study of catalytic properties of mono- (Pd, Au) and bimetallic (Au-Pd) polymer-based catalysts of alkynol hydrogenation. Selective hydrogenation of alkynol C5 (2-methyl-3-butyn-2-ol) was studied over Pd, Au and Au-Pd catalysts supported on hypercrosslinked polystyrene of MN100 type bearing amino-groups. Synthesized Au/MN100 catalyst was shown to be promising for triple bond hydrogenation: more than 96% selectivity with respect to 2-methyl-3-buten-2-ol at 95% of the substra...

Energy efficiency and renewable energy are considered to be the twin pillars of sustainable energy policy and are high priorities in the sustainable energy hierarchy. In this context of continuous improve of energy efficiency in buildings; each state has developed different national politics on this direction. The obligation of the EU Member States to assimilate the strategy proposed by Energy Performance of Building Directive (Directive 2010/31/EU) determined the local communities to find financial resources and ...

This paper presents the possibility of using landscape metrics in the process of modeling vulnerability analysis of landscape qualities that should be protected when considering spatial decisions about its future land use. Modeling was carried out on the lower part of Krka River basin, in the Mediterranean part of Croatia. This area is under protection as a significant landscape according to the Croatian Nature Protection Act and it was chosen due to heavy developmental pressures that have resulted and still threa...

The flysch Carpathians presents geological medium that is especially difficult for deep recognizing with use of geophysical methods. Complex geological structure of folded orogeny and connected with it distribution of physical parameters generate ambiguous and frequently unreadable seismic image. In such circumstances looking for independent support for geological interpretation of seismic sections is purposeful, for example using magnetotelluric data. Magnetotelluric measurements were carried out along the select...

The scope of this study is the application of a new approach for the estimation of potential soil erosion using a physically-based erosion model Erosion 3D for modelling potential erosion in the Myjava River basin, Slovakia. Erosion 3D is a physically-based model for predicting soil erosion by water on agricultural land. The model is predominantly based on physical principles and it simulates surface runoff, erosion, deposition and the detachment of soil particles for single events, and provides good tool to simul...

Well logging is usually used for monitoring the technical condition of the wells. This means whether there is degradation of the casing (potential subsurface damage of well) or not and uncontrolled overflow behind casingпїЅs strings. Measurement is able to cover both the static state of change saturation and the dynamic process of the ongoing spill in the relevant horizon. Furthermore, if there are monitored overlying horizons because of gradual overflow and saturation of the storage gas caused untightness of well...

The application of REACH and LCA systems to the coal waste was presented in this paper. Recent years has brought a growth interest in environmental management systems, which could minimize the negative environmental impact of chemical substances. As a result of that process standards such as REACH and LCA have been developed. Both of those systems are based on different assumptions. LCA refers to the whole life cycle of particular product and in consequence is considered as so-called пїЅfrom cradle to graveпїЅ stu...

Recycled Concrete Aggregate is a material resulting from the crushing of concrete elements. Currently, as a result of increased demand for natural aggregates, artificial aggregates are sought as an alternative materials in civil engineering activities. Recycled Concrete Aggregate characterizes high strength, but some properties, both mechanical and physical, remains unclear, which often discourages engineers to use this material. The paper presents the results of the California Bearing Ratio (CBR) and cyclic CBR (...

Currently, a great emphasis is put on the environment, energy intensity, and therefore on applications of the renewable energy sources (RES). Putting a large amount of RES into the modern distribution systems represents certain problems we can address, inter alia, the variable energy outputs of RES aggregated together, including their accumulation managed by respective energy management system (EMS). The result may be the optimization unit commitment of RES distributed in the micro-grids of a fictitious intelligen...

This paper presents a technique for the detection of elliptic objects connected with subsidence troughs in radar interferograms using the Hough transform. The generalized Hough transform to detect arbitrary shapes, including ellipses, requires a five-dimensional accumulator array, which occupies a very large part of the memory. For this reason, to overcome memory problems, a modified algorithm using a one-dimensional accumulator array was applied. This modification helped also to reduce the computation time. In th...

Intensive development of industry and urbanization have led to the increase of the waste water amount that pollute water flows. On the contrary, the need for water of satisfying quality continuously grows. The paper industry is one of those branches that are characterized by very high water demand and big amount of polluted waste water. In the meantime ensuring adequate quantity and quality of water is one of the most important goal of water resources management in paper industry. Water demand can be covered from ...

The chronometric geodesy is based on a relationship derived on the basis of the general theory of relativity, indicating a change of frequency and time at occurring change of potential. It is known that there is a possibility of using these relationships to determine geopotential changes, thus also height changes, by examining changes of clock rates in various places. From the formulas that describe this relationship, it can be estimated that at geopotential change by 1 m2/s2 (which corresponds to a height differe...

Calculation of the local scour behind the hydrosystem tailrace structures is associated with determination of hydraulic flow parameters, characterized by a sudden increase in the depth. The flow parameters are calculated on the basis of T. von Karman's integral momentum equation for a submerged turbulent jet. The flow in the hydrosystem tailrace, in accordance with the approach of G. N. Abramovich, is considered as a set of a submerged turbulent jet, a vortex area, and a main flow in the tailrace passage. It allow...

Mining is a complex and staged process that includes: prospecting, documenting, and mine planning, opening up and extraction of mineral (mining, transport, processing and deposition of waste), revitalisation and re-development of former mining area. Mining permit and decision on environmental impact of the enterprise are required prior to commencement of mining. During and after end of mining, impact of mineral extraction on surrounding environment, including surface deformation and the related mining damage, wate...

The commutation of inductive low voltage circuits of alternating current is accompanied by the occurrence of commutation over-voltages, often hazardous for the components of the electrical circuit. This paper describes a modern method for studying transitory regimes which occur at the disconnection of inductive circuits, based on the usage of a data acquisition system type NI-USB 6003 manufactured by National Instruments. The software used is Matlab, and the data acquisition method is based on Matlab programming. ...

The bioeconomy field covers the agricultural domain, all manufacturing sectors and associated services that involve any form of biological resources. Thereby, the research on bioeconomy is dependent on the data collection both about biological resources (such as plants, animals, and microorganisms) and about the connex phenomena. The remote sensing techniques provide an excellent way for the acquisition of information without making physical contact with these biological resources. So that, the remote sensing find...

The paper deals with applying of the biogeographic model of climatic conditions of forest vegetation zones in the Czech Republic to forest management strategy under predicted climate changes. The biogeographic model which was developed at Palacky University Olomouc is based on climatological prediction data for the time period 2010 - 2100 according to Representative Concentration Pathways regional scenarios and geobiocoenological data related to forest vegetation zonation. As results presented, climatic conditions...

For the analysis of various characteristics of natural objects distributions cluster analysis, principal component analysis and regression analysis are often used. There is a large number of distributions of the parameters of natural objects (e.g. spectral characteristics of soil), where the function is unknown, and discreteness is not visible, and contrary to the basic properties of described object. The soil cover is continuous in space and has no clear boundaries between spectral characteristics, such as soil l...

The management of solid waste is a challenge in municipalities of South Africa. The objectives of the study were to analyze the current status of recycling and challenges hindering efficient solid waste minimization mandate by municipalities in Limpopo province. The study employed both qualitative (through observation questionnaires interviews) and quantitative (fishers exact test) research methodology. The study was based on field surveys allowing for observation and measurement with respect to waste minimisation...

The technology of extending the service-oriented architecture of building configurable information systems is considered. The actual task is to increase the flexibility and efficiency of the newly created integrated information systems or services by providing the ability to configure the logic for the execution of functions that perform services in SOA. An additional task is to decrease the complexity of configuring the functionality of the service and to make it close to level of complexity of customization of b...

Machinery from all industries is subject to aging processes. For economic and time reasons, damage cannot be repaired by replacing worn or damaged parts, but the product must be reconditioned. One of the most used reconditioning technologies in the industry is welding. Reconditioning technologies are credible, when samples are tested standardized. In most cases, welded structures have undergone various types of destructive tests: tension, compression, torsion and fatigue.[1] Since fatigue tests cannot be made duri...

The depletion of light hydrocarbon resources and increasing the amount of heavy oil reservoirs drive petroleum companies to produce high viscous oil by unconventional methods, particularly thermal methods. Presently increasing the efficiency of thermal applications is a vital task. This paper discusses the influences of catalytic (introduction of catalytic precursors and H donor with amount of 1 wt% on oil) and non-catalytic aquathermolysis to the group composition and properties of extra-heavy oil from пїЅAshalch...

This work is aimed at investigating the carbonate collector micro-jointing using the results of the precision underground water level monitoring at the Mikhnevo Geophysical Observatory (пїЅMikhnevoпїЅ GPO). For a long period of hydrogeological observations from August 2013 to December 2016 a database of local mini-cones recorded in the observation well was formed. The leading factors that influence the process of the level recovery of mini-cones based on the systematization and generalization of selected mini-cone...

Our research deals with the possibilities of finding and documenting the historical field fortifications of the Thirty Years' War (1618-1648) in the Czech Republic. The archaeological site that was investigated is located in the western part of the Czech Republic, between T?ebel and VysokпїЅ SedliпїЅt? villages in Tachov district. Terrestrial laser scanning, winged RPAS (Remotely Piloted Aircraft System) and geophysical instruments GPR (Ground Penetrating Radar) and a magnetometer were used to prospect and documen...

Sulphate is the specific anion present in the acid rock drainage (ARD). Although sulphate is considered benign or with low toxicity, some countries have set limits for the wastewater discharged to natural receivers, often 500 mg/L or 600 mg/L. By conventional treatment of the ARD with calcium hydroxide, some gypsum can precipitate, depending on the ARD initial sulphate content, but the conformity for sulphate will not be achieved, because the concentration correlated to gypsum solubility exceeds the limit value by...

Lake water quality determines the possibility of its using for technical purposes (as a source of drinking or industrial water) and for recreational using (swimming, angling, water sports). In modern times the water quality state is deteriorating because of excessive anthropopressure. The attempts of water quality improvement are taken via technical methods implementation. In order to predict the effects of potential restoration actions the great need exists of the models development, which can help to select the ...

The use of marine algae in plant cultivation has been known since antiquity, but their application to reduce abiotic stress has been reported in recent years, when the use of technology based on healthy products for humans and other organisms has become a priority. In this work, we investigated the effect of a seaweed extract from the brown alga Ascophyllum nodosum (L.) Le Jolis (SuperFiftyпїЅ 0-0-8) on drought stress tolerance in Phaseolus vulgaris L. Been plants have been influenced by drought stress for a week ...

The purpose of this study is to highlight the flavour compounds found in tonic beverages obtained from plants with bioactive potential. Identifying these compounds through GC-FID (gas-chromatographic coupled with flame ionization detector) modern methods are leading to the appreciation of these beverages and the possibility of improving the proposed recipes. Six drinks rated B1, B2, B3, B4, B5, B6 made from indigenous plants; the plants were dried at 65 пїЅ C, macerated in 50% vol. ethanol for three days in a rati...

On the last four years, we take surveys on the diseases of some plants from natural habitats which, over time, support improvement by plant breeding process One of the locations where we can found such natural resources is the Nera River valley, inside of the National Park, and those is the main reason we are sure that this plants are on their natural habitat. Regarding elderberries shrubs (Sambucus nigra) on the research area, they are well represented as populations along the river sides. It is well known the ut...

In this paper, it presents a modality for verification of conformity the parts which are achieved on CNC machine tools, modality which takes into account the production process capability. By this control method it determines the capability of the technological process of making the piece, it can be applied either on the technological process flow, or on reception of consignments of products. As the case study, it was considered a piece ,,end effector,, used in industry building of machine, whose volume of achieve...

The populations of the native silver lime species (Tilia tomentosa Moench.), one of the most important forest tree species in Western Romania, Caransebes area, show strong vitality and a large morphologic variability. The present carried out research would like to contribute to explaining some aspects of the genetic diversity. The extension of silver lime, during the last decades, in the Caransebes area natural forests (by natural regeneration) seems to be a visible issue in the present-day climate change context....

In order to make selection methods more efficient and to make improvement works perfect in developing new mustard cultivars at the Agricultural Research Station in Lovrin, we carried out a series of research and biometrical measurements starting from the necessity of better knowing specific variability, quantitative features, productivity features, the way they are passed on hereditarily, and the intensity of the correlations between them.Yielding capacity is a complex quantity feature based on a large number of e...

The relationship with pet has been for many years in the attention of researchers, with studies which approached the relationship under very different aspects. Researches has focused on the multiple benefits of different stages of individual development (from kindergarten to elders), on gender influences over many related issues (animal attachment, involvement in animal welfare activities), on the therapeutic aspects (positive influences on cancer patients, depression, etc.) and, last but not least, the positive c...

A leading cause for offshore decommissioning is connected with assessment of increasing level of risk due to progressive structural damage and danger potential, in both structural and technological collapse, taking into account the environmental conditions and operational loads for which structure undergoes. The purpose of this paper is to express the vulnerability due to fatigue phenomenon of structural elements - studied on a model corresponding to self lifting Romanian offshore platform "Gloria" - as annual yie...

In installations in which flammable substances are processed, transferred or stored, explosive atmospheres generated by flammable gasses, vapors and mists or combustible dusts can occur. The assessment of these installations and equipment within is very important in order to verify the implementation of measures that lead to minimizing the risk of ignition of explosive atmospheres and occurrence of an explosion. In Romania, technical installations that operate in environments with hazard of explosive atmospheres m...

In essence, the paper presents the tracking of the behavior in time of hydro-technical constructions by establishing the horizontal displacements (dx and dy) compared to the base tranche and the previous tranche, and also the processing of these measurements and establishing conclusions and recommendations regarding the behavior of the objective taken into study. As studied objective was elected CпїЅnde?ti dam, which is located in Buz?u county, at about 19 km upstream from town Buz?u. The dam is situated on the Bu...

A large number of structural damages reported during the past decades around the world associated with a high geotechnical risk have highlighted the major attention that should be given to the expansive soil category in engineering practice. For avoiding or mitigating the effects of clay expansiveness on civil engineering structures before construction, the identification of soil parameters related to swelling behavior is considered essential in solving geotechnical engineering problems. This paper aims to analyze...

Superior capitalization of industrial waste as: slag heaps, plastics and rubber, vegetable and animal oils, natural or synthetic fibers, make significant contributions to reducing pollution, environmental protection, to increase eco-efficiency, reduce production costs per km of paved road. From the point of view of physical and mechanical properties most suitable materials that can replace mineral aggregates are blast furnace slag which after waste processing and sorting through the appropriate dimensions can succ...

Storage, protection and recycling of explosives, gunpowder and rocket fuel obtained from utilized ammunitions is significant problem. It requires, special services for safety and corresponding additional expenses on security and ecology. Same time, they are energetic materials and attractive for chemical and mining industry. One of the main directions for solving the above-mentioned problems is application of utilized ammunition for development of new industrial explosives for mining industry. Implementation of ne...

In Europe, the knowledge and measures regarding self-protection in case of emergency is very poor in general. Within the population, young people aged 7 пїЅ 12 require a special approach, as their knowledge and behavior is different from adults. Their perception of accidents and disasters needs to be educated through an efficient teaching program. Therefore, a first step in developing such a tailored education program is to assess the natural hazards in European countries, with a special focus on the hazards that ...

The majority of current water quality measurements are based on the traditional in-situ point sampling and laboratory analysis of the samples. This method, besides being time and financially more consuming than the remote sensing, also very often lacks a sufficient spatial and temporal resolution to adequately analyse and describe different phenomena (i.e. eutrophication). In this study, we have assessed the possibility to use air-borne hyperspectral remote sensing for mapping concentrations of different water qua...

PutnaпїЅVrancea Natural Park (38,204 ha) is located in the eastern part of Romania, the upper part of Putna River Basin (Curvature Carpathians). It includes valuable complex forest ecosystems, mountain meadows, also known for the large variety of flora and fauna. Over the past almost thirty years, the study area was subject to diverse natural and man-made environmental stressors which had significantly influenced land use/cover changes with a particular impact on forest-covered areas. The current paper is seeking ...

First results about crustal models were obtained from various geophysical and seismological methods applied in Romania in the last part of XX century. A thorough interpretation of these data lead to the first partial models of crustal structure in the western part of Romania. In the first years after 2000 two regional seismic refraction lines were performed within a close cooperation with German partners from University of Karlsruhe. One of these lines is Vrancea 2001, with 420 km in length, almost half of the eve...

One of the main objectives of EU energy policy is to increase the share energy from renewable sources to 20% by 2020, in view of increasing this share in the coming years. Sustainable and perspective source in diversification of share and its increasing are targeted grown energy crops. In Slovak regions, the share of the renewable sources in the gross final energy consumption is only 11.6%. Potential for growing energy crops is in all Slovak regions. In terms of soil factor is the possibility of growing on an area...

Assessments conducted by the various failures analytical groups shows that failures of cylinder liners, piston rings and pistons all related to combustion chambers share the highest proportion every year in Marine Main Engines failure statistics by component part, conversely, excessive wear of cylinder liners and piston rings of Main Engines and problems associated with scuffing have frequently occurred. To solve these problems, it is necessary to conduct analytical assessments on a variety of data such as actual ...

When operating waterworks, it is required to refine the data on actual stresses in different structural elements of the facilities. The authors put forward a nonconventional approach to expanding the waterworks observation network. The quantitative assessment of stresses in a structural element at the given moment of time is performed using borehole techniques of geomechanics. Later on, the change in the stresses and deformations is controlled based on the data on deformation of sidewalls and damage of galleries u...

In system of sustainable and safe development of regions one of the major tasks is scientific justification of a control system of health of the population at the expense of risk assessment to health of the population from negative impact of factors of the environment. One of the leading factors of anthropogenous impact on health is aerogenic. The paper studies public health risk assessment from the chemicals emitted city's largest enterprises. The analysis is performed on the basis of the qualitative and quantita...

The contemporary construction, both new buildings and renovations, is characterized by the low air permeability of the building envelope. The high airtightness of the building envelopes reflects current energy-saving trends. However, saving energy is a contrast with hygienic conditions (supply of fresh air). The well-being of occupants is defined by the interaction of the physical, chemical and biological components of the internal environment of buildings. The basic factors of indoor air quality are indoor air te...