Browse

This paper presents the development and experimental validation of an intelligent variable-structure control system for optimizing industrial ventilation in ATEX (ATmospheres EXplosibles) environments. Current ventilation solutions, based on continuous maximum-flow operation, consume 15 to 40 percent of total industrial hall energy and remain largely reactive to hazardous atmosphere formation. The proposed system integrates Model Predictive Control (MPC) with Artificial Neural Network (ANN) algorithms and a spatia...

The use of a total station for carrying out high-precision work on the alignment of the stands of a continuous casting machine is an urgent task that directly affects the quality of steel. Modern devices such as laser trackers are used to carry out such work, but their use is limited due to the high cost of equipment, the need for knowledge and experience with such equipment. The use of classical techniques and equipment is subject to a huge influence of the human factor, thereby reducing the quality of work. Simi...

Currently, one of the main tasks of every employer is to ensure a safe and healthy working environment for every employee. In a global case, it should not only be a legal act, but especially a moral act. The modern policy of each employer should therefore be set in such a way as to continuously improve the occupational safety of employees. This continuous improvement can be achieved in particular through continuous periodic inspections and audits carried out by independent occupational safety staff. This chapter d...

ADI (Austempered Ductile Iron) - a bainitic ductile iron in which the resulting structure is obtained by the isothermal decay of austenite in the bainite region is currently a very promising material, which has a very wide application in various industries. It is characterized by a particularly favorable combination of strength and ductility, which exceeds the properties of heat-treated steels in the strength range of 800 - 1500 MPa. Its production is problematic because the ferritic or ferritic-pearlitic SGI (sph...

The work is aimed at creating methodological provisions to substantiate the safe parameters of the thermal regime in permafrost rocks when constructing underground mine excavations in the Arctic region. An idea is to control the thermal regime by creating mathematical models, taking into account the main technological operations during excavations driving. The paper presents the results of experimental studies and evaluates the thermal impact of various technological processes during the construction of mine excav...

Historical ore exploitations generated mining waste with useful metal content, near Baia Mare, Romania. Central Flotation Pond (CFP) represents a secondary resource, but also a risk factor of pollution for the environment: groundwater, surface water, soil, air. CFP was inventoried by the Permanent Secretariat of the International Commission for the Protection of Danube River (ICPDR) as high risks spot in Romania with immediate effects on Somes-Tisa sub-basin, due to the content of dangerous substances: cyanide, he...

This work studied the problem of the joint use of Gauss - Laplace and B (beta) distributions to describe the disintegration of minerals of polymineral ores, which is associated with the liberation of mineral grains - the release of monomineral particles from intergrowths with other minerals. The basic position of the work is the dependence of the result of reducing the size of mineral particles on the energy expended on this process, postulated in the mineral processing theory. This dependence was taken into accou...

The paper presents the results of mineralogical and technological research of tailings produced during processing of rare-metal columbite ore of the prospective Zashikhinskoe deposit. The grain size analysis of a tailings sample showed that the most part of the material is represented by fine-grained particles with 53.3% yield of size fraction -0.045 mm. Mineral composition of the tailings is mainly represented by quartz, albite and microcline. Total content of minor minerals, such as muscovite, columbite, cryolit...

Thermal dehydration of a natural hydrous ferric sulfate Fe(SO4)(OH)?2H2O was studied using x-ray-phase and thermal analyses. This mineral was found in the hypergenesis zone of the Khangalas gold deposit, Eastern Yakutia, Russia. A comparative analysis of the sample with known hypergenic hydrous ferric sulfates with a similar Fe2O3:SO3 ratio close to 1:1 was performed. The dissimilarities between the founded mineral and its possible polymorphs ? butlerite and parabutlerite are identified. The mineral is less stable...

The study is the first experience to assess the possibility of obtaining clean garnet material from garnet-mica schist from waste Keivy area of Kola Peninsula using electric pulse disintegration. It is shown that the fraction +0.25-0.5 almandine garnet crystal crushed using electric pulse disintegration material and after it washing upward flow of fluid contains up to 94% clean garnet.

The production of electricity and heat is based on a number of fuels, with fossil fuels being the most widely used fuels at present. Electricity is mainly produced by generating steam in boilers for the combustion of sorted fuel and feeding it to the turbine that drives the generator. Combustion plants are operated on demand and energy demand, either as large utility plants or as industrial combustion plants providing power in the form of electricity, mechanical energy, steam or heat for industrial production proc...

This paper presents the research undertaken in order to establish a processing technology for the Budureasa dolomitic limestone. For this, a series of physico-chemical and mineralogical analyzes were performed, but also unitary processing operations such as grinding, calcination, gravitational concentration and flotation, and solubilization with carbon dioxide in an aqueous medium to obtain a MgO ? rich concentrate, usable in various fields of activity, under economic efficiency conditions. Mineralogical, chemical...

Carbonaceous overburden rocks carry a heightened metallogenic potential. The possibility of extraction of valuable metals from natural bitumens and overburden rocks of oil fields is considered. The results of mineralogical and technological researches of samples are presented. The analysis of sample has shown an increased content of valuable microelements in some objects. All samples contain carbon of varying degrees of metamorphism. The fact of simultaneous concentration of carbonaceous rocks by several microelem...

When coal preparation, particularly suitable for coking created considerable amounts of sludge. Most of the technological operations is taking place in water environment. Raw sludge at a time when technology was not yet at such a high level as today and emergency overflows were deposited in tailing ponds. This is practiced on coal districts in the Czech Republic and Poland. The purpose of this section was to analyze the possibility of another flotability of coal sludge deposited in settling ponds of company EKO CA...

In the present scientific work assessed current status of question about grinding stage effect to electrochemistry parameters of operation preparation slurry before intermediate selective flotation. Showed needs of more detail study chemical reactions in the slurry preparation and flotation processes.At example of Abiz deposit ores has been offer new methodology. The ores are polymetallic sulphide type and the one are most difficult for mineral processing. The methodology allows increase information base during fl...

The Rare Earth Elements (REE) have been classified as resources critical for the European Union and divided into: light rare earth elements and heavy rare earth elements. The demand for REE is constantly increasing, which is connected with the wide range of their applications. The article presents the results of research conducted to determine the concentration of Rare Earth Elements in fly ashes obtained from the combustion of coal at the Rybnik Power Plant. The concentrations were measured using the ICP-MS and S...

The growth in economy is reflected also in the rising demand for freight transportation. The freight railroad industry play an important role being a mainstay of transportation for basic industries. New projects are currently developed for increasing the capacity of transportation by rail from large coal and mineral basins to the places of consumption or within the processing plants. The combined heavy load and usage cycles imposes severe stresses on the components of the freight cars. To this purpose a comparativ...

According to data reported in the EU report, critical raw materials include 20 raw materials, including rare earth heavy metals (Gd-Lu and Y) and rare earth light metals (La-Eu). Thus, rare earth metals include lanthanides of atomic number 58-71 and scandiums with atomic numbers Sc -21, Y -39 and La -57, respectively. Rare earth metals are used in many modern, innovative techniques such as optics, nuclear technology, production of permanent magnets that are part of discs for computers and automotive hybrid motors,...

In our century and especially in recent decades the noise level reached an increasing width, becoming a polluting source of the same severity as chemical pollution. Increasing power and work speed of equipments has contributed to diversifying and increasing the number of noise sources and thus increased number of people exposed. Noise generating sources in technological procedures of processing may be of continuous nature (pneumatic energy production, water transport) or intermittent (systems for transporting mine...

The Power Plant Rybnik (Elektrownia Rybnik) is one of many in Poland, which is coal-fired. Fly ash, as is well known, are combustion by-products, which are mineral residue from burning coal. Their phase composition depends mainly on the quality of fuel (coal) and combustion conditions. In the mineral composition of the examined ashes one has identified minerals such as: glaze, quartz, mullite, spinels, hematite, and unburnt coal. Spinels present in the fly ash can be a source of some metals, and due to the magneti...

The article describes studies of the process of mineral raw refinement in dry, wet form and with addition of chemical reagents. Specific energy spent to refinement has been determined in the course of disintegration, as well as specific surface of particles before and after refinement has been measured. The values of refinement of inter-phase surface area of disintegrated mineral particles and values of specific surface energy have been calculated. With the help of performed studies one may obtain quantitative exp...

This article deals with a possibility of extraction flotative Ag-concentrate from the waste material, concretely slag arising from processing of silver and copper in the second half of the twentieth century, which is deposited around the city of KutnпїЅ Hora in the Markovi?ky region. A cationic octadecylamin was used as a flotative collector. The aim was to reach maximum metal content of the concentrate as well as maximum yield of Ag into concentrate during a decrease of raw material capacity. An anion active coll...

The use of closed water rotation in enterprises processing phosphorus-containing ores requires a long standing circulating water precipitation in the tailings storage. The paper studies possibility of treatment of industrial mineral processing waters from suspended particles and water-soluble impurities adversely affecting the flotation process with the help of reagents-flocculants. The characteristics of the dispersed and liquid phase of industrial waters formed during the processing of non-sulfide ores (for exam...

Criteria of assessment of surface energy during the minerals disintegration are substantiated in the paper. Values of mechanochemistryactivation criterion of disintegration process are experimentally de fined for a number of gold-bearing ores of the Far Eastern region. It is established that directed changing of surface mineral characteristics makes possible prediction and optimization of technological parameters of ore crushing and Пѓ parameter (surface tension coefficient) and can be a regulated parameter of con...