Browse

Existing industrial ammonia production installations operating in potentially explosive atmospheres usually contain a wide range of explosion protection concepts implemented during different stages of plant modernization and expansion. In such brownfield installations, the coexistence of equipment originating from different technological periods often leads to a non-uniform distribution of protection concepts at installation level. This aspect is particularly relevant for industrial sectors associated with oil and...

The presence of flammable and/or combustible substances in various industrial production processes generates in most cases potentially explosive atmospheres, which transforms a regular work environment into an explosion risk area, directly influencing the way in which equipment intended to be used in these areas is designed, installed and maintained. In areas where potentially explosive atmospheres may form due to the presence of flammable and/or combustible substances, technical equipment must be used whose casin...

Potentially explosive atmospheres constitute a major risk in the operation of industrial installations that use or generate gases, flammable vapours or combustible dust. According to ATEX legislation, explosions can occur as a result of the interaction between an explosive atmosphere and an active ignition source. Even under the conditions of using ATEX-certified equipment, the progressive degradation of the components can lead to the appearance of uncontrolled ignition sources. This paper analyzes from a technica...

Hydrogen is a promising energy carrier for future low-carbon systems, but its high flammability, wide explosion range, and low ignition energy present significant safety challenges. This paper proposes an integrated ATEX-based risk assessment methodology specifically designed for hydrogen storage and utilization systems. The methodology combines regulatory requirements, including EN 1127-1:2019, with a hydrogen-specific risk matrix, ATEX zone classification, and operational risk mitigation measures. A high-pressur...

Drilling fluid properties – density and rheology (plastic viscosity, yield point, gel strength) – are essential for wellbore stability, pressure control, hole cleaning, and minimizing non-productive time (NPT) in oil and gas drilling. Traditional manual methods (pressurized mud balance, Fann 35 viscometer) are periodic, labor-intensive, and delay corrections, increasing risks of kicks, lost circulation, and instability. This study proposes an intelligent automated system for real-time monitoring and control us...

In this paper is presented a Mobile Integrated System for on the Site Testing (MISST) of equipment intended for use in potentially explosive atmospheres, with type of protection pressurization p, resulting from research activities out by the research and testing team involved. The fundamental aspects of the design, implementation and easy use of such an integrated system have been examined, implemented and tested. A mobile integrated test system for Ex p type of protection applied to equipment in Ex construction, ...

Liquefied Petroleum Gas (LPG)-assisted retrofitting of diesel engines remains attractive, but exhaustive dual-fuel bench mapping is costly and engine-specific. This paper presents a simulation-guided prioritization workflow for retrofitting the UTB 2404055 agricultural diesel engine to LPG-diesel operation. An AVL BOOST 1D model of a dual-fuel architecture with multi-point LPG port injection and direct diesel pilot injection was calibrated and validated against eight measured diesel baseline points at 1400 and 240...

The general concern about climate change and the actions that must be taken to protect the environment are current concerns and occupy the first places on global agenda regarding the search for viable and sustainable solutions. Transition to green energy involves numerous intensely analysed issues with major implications for the economies of many countries. Thus, integration of renewable energy in oil and gas operations is an increasingly used strategy to reduce the carbon footprint and improve sustainability of t...

Technical installations in explosive hazard environments have specially designed characteristics to ensure safe operation in such atmospheres. For safety reasons, it is essential to maintain the integrity of these special features throughout the entire lifespan of the installations through maintenance and inspection processes. In this operation it is necessary to use safety tools. These tools must be assessed and certified in accordance with the applicable requirements of the current legislation, regulated by Dire...

With the growing interest in using hydrogen as a clean and sustainable energy source, the processes of obtaining, transporting and storing it are becoming increasingly relevant. In the event of industrial technological breakdowns, rapid and efficient intervention in hazardous environments requires the selection of specialized personnel, capable of operating in extreme conditions. Interventions in potentially explosive atmospheres require not only rigorous technical training, but also optimal physical and psycholog...

The present paper presents the transfer to the virtual environment and CFD analysis of physical experiments on the explosions of air-hydrogen mixtures carried out on a transparent stand, in the shape of a rectangular spiral. The shape of the stand was designed with the intention of directing the explosion process of the fuel mixture on a rectangular-spiral trajectory, with angles of 90 degrees. The free volume inside the spiral was sectioned by four foiled shutters into four ignition/combustion chambers, the first...

The study of hydrogen explosions in interconnected spaces is essential for safety in industrial and laboratory settings. Due to its highly flammable nature, understanding hydrogen explosion dynamics is essential for risk mitigation. This paper presents an experimental and computational analysis of a hydrogen explosion in a setup with four interconnected chambers. The experimental stand had transparent walls for direct observation. Ignition was initiated to analyze flame propagation, acceleration, and pressure vari...

Electrical installations in spaces classified as being in danger of explosive atmospheres have special characteristics to correspond to operation in such atmospheres. For safety reasons in these areas, it is essential that during the lifetime of these installations, the integrity of these special characteristics be maintained. The assessment of explosion-protected electrical equipment within the scope of certification is of paramount importance in view of the risk of explosion which must be minimized to ensure the...

The flameproof enclosure type of protection is a safety method designed to prevent the ignition of an explosive atmosphere in hazardous environments. It involves enclosing components that may generate sparks, electrical arcs, or high temperatures within a robust, explosion-resistant housing. This enclosure is engineered to withstand the pressure generated by an internal explosion of a flammable gas mixture, ensuring that the explosion does not propagate to the surrounding atmosphere. This type of protection is par...

The rational use of natural resources is an urgent task not only in the oil and gas sector, but also in all sectors of production. This paper presents procedures for the preparation and purification of extracted oil-containing wastewater and stormwater from suspended solids, as well as various salts dissolved in water with the supply of coagulant solutions: iron sulfate or aluminum sulfate and soda ash to adjust the pH value. The conducted research and measures for the treatment of stormwater and carbonaceous wast...

The need to develop an integrated testing system for explosion-protected construction equipment with the type of protection "p" arose from practical considerations. The use of a mobile, versatile and adaptable system for the field performance of tests specific to this type of protection applied to explosion-protected construction equipment brings several novel advantages, the most important of which are: grouping all the test equipment required for the tests, elimination of measurement errors by performing several...

Asphalt-resin-paraffin deposits (ARPD) are a complex dispersed system formed by substances that have separated from the oil phase according to various signs. The sediments include asphaltenes, resins, paraffins, liquid hydrocarbons, mechanical impurities and water. In conditions of intensive deposition of ARPD, normal operation of wells is impossible without carrying out work using dewaxing equipment. The purpose of the treatment is the use of chemical reagents in the composition of the emulsion to affect the bott...

Oil composition at the late stage of field development is determined by both natural and anthropogenic factors. Change in compositi on and physical-and-chemical properties of oil could be considered significant in several ways. This is due to both changes in the interaction of oil and injected agents, and involvement of the reserves not yet developed. The most sensitive, quickly a nd accurately determined parameters are optical characteristics of oil, and namely the coefficient of light absorption. It depends on t...

The main problem of restoration of localities of the North Bohemian Brown Coal Basin is the occurrence of overburden rocks from the series of rocks of coal seams. Representative example of these localities is the Strimice dump. This report briefly summarises the history of reclamation of this dump. Main attention is devoted to the result of application of fertilizable rocks and to the results of the research of the area retained for natural succession.