Browse

Evolution and development of landslides is influenced by a number of natural factors (soil, geological substrate, relief, climate, vegetation etc.) and anthropogenic factors (deforestation, overloading of land with constructions, inadequate meteoric waters drain, artificial undermining of slopes-embankments for roads etc.). In this paper we propose to analyze the causes of landslides that affected the county road DJ 585 located in Visag area, Caras-Severin county limit, and also to issuing technical solutions for ...

The balancing devices in cable tension, DEC's, linking the extraction vessel (SKIP) and cables binding devices, DLCпїЅs, and are designed to equalize the tension in cables of extraction plant (multicable). The paper presents a new solution design of the screw-nut mechanism of initial tension cable for the uniformity tension and horizontal positioning of the rocking mechanism. The extraction vessels cables are attached to those by means of binding devices and equipment. Binding devices and equipment should be safe ...

High performance environmentally friendly aqueous adhesive nanodispersions for shoe manufacture were obtained by improving the polychloroprene adherence by chemical grafting of polychloroprene latex DISPERCOLL C 84 with methyl methacrylate in the presence of benzoyl peroxide as initiator. Grafting is demonstrated by the absence of monomer and polmethylmethacrylate in dispersions, decreasing of intensity of some bands assigned to polychloroprene as well as broadening and splitting of its C-C stretching band due to ...

Vanadium and nickel exist in oils as porphyrin complexes. Metalloporphyrins are concentrated in the asphaltene-resinous part of the oil, while the maximum content of vanadium and nickel is accounted for by asphaltenes. Up to the present time, information about features of content and distribution of vanadium, nickel, and the types of the corresponding metal complexes in asphaltenes and resins of heavy oils and natural bitumens has a disparate and non-systemic character. In this work, composition and distribution o...

This paper aims to bring the latest information on annual calibration of measuring equipment installed in cement plants. Calibration should be certified to confirm the quality of continuous measurements, namely the measurements of plant equipment is controlled by parallel measurements with standard reference methods by an authorized testing laboratory (accredited). These types of measurements are referred to as instant annual measurements or measurements for the chimney testing. A continuous emissions monitoring e...

The area of interest (Slatinice wastedump) is located on the southern edge of the MostпїЅs basin central part (North Bohemia, The Czech Republic). The wastedump was deposited into the space of the fomer lignite openpit mine, called Slatinice. The body of the wastedump has an ovoid shape with the longer axis oriented in the NW пїЅ SE direction. The major thickness, about 100 m, reaching a dump in its central part. Monitoring wells have been realized in the area of interest between the years 2013 пїЅ 2016. The aim o...

In Polish underground copper ore mines belt conveyors are the most common transport facilities. In KGHM Polish Copper SA there are over 100 km of belt conveyors. To increase reliability of the transportation system there are built numerous ore bunkers ensuring continuity of the excavation during 5 working days of the week and on weekends, during which ore bunkers feed processing plants. In addition, some conveyors were built as reverse ones what in cases of emergency can provide alternative routes to supply ore to...

Piled raft is a recent innovative foundation. The superstructure loads are transmitted by piles and raft. It provides safe and economic foundation. In this paper, the influence of raft-subsoil interaction on a lateral behavior of the foundation was investigated. Three-dimensional models of the piled raft and pile groups were developed by ABAQUS program. Then, their lateral deflections were compared. A gap between the cap and subsoil in pile group was varied from 0.25m to 1 m. In addition, the pile spacing was chan...

Ostrava city and Karvina city has a long history of mining. Over time in Ostrava there has been a decline in mining activity. But closed coal mine may be performed in the correct disposal of heavy burden on their surroundings. One of the biggest dangers are the outputs of mine gases. If gas leaks into a confined space, there is an accumulation of gas and may result in an explosion. The article presents two cases of methane explosions, which were noticed in the Ostrava-Karvina coalfield. Such an explosion had a dev...

In order to determine the impact on the working environment and the effects of pollutants on human operators, numerous measurements were made using an experimental stand in a forge, machine building, equipped with heating furnaces, treatment furnaces, mechanical presses, oxyacetylene flame cutting equipment and mechanical saws. The paper presents the equation of technological material balance with inputs and outputs corresponding to the process of hot forging of different semi-finished products and the main pollut...

The paper presents experimental results obtained in determining the chemical composition of the base material- heat affected zone пїЅ filler material in reworking by ultrasonic welding field. The work shows the curve of the concentration of carbon, nickel, chromium, molybdenum, iron, tungsten, silicon and cobalt in the resulted material couple. There are presented differences between reworking in ultrasonic field and common welding process. The analysis of the results obtained and presented in the paper shows the ...

In recent years, the ultrasonic field has gained the attention of several authors in the area of employing it to process and interact with fruit juices as a viable alternative to the use of conventional processing technologies. The ultrasound technique main advantage, as a non-thermal treatment, is its ability to maintain juice quality whist enhancing the juice homogenization level. The aim of this study was to subject the sea buckthorn juice to ultrasonic field treatment in order to improve the its pulp stability...

The paper talks about the development of the geodetic networks using measurements of direction from the fixed points (with their coordinates known) towards the variable points (determined points). It starts from a situation that is given seven geodetic points whose coordinates are known, and an unknown point must be framed in such a network. After observation directions are carried out in three of the seven known points must be determined the coordinates of the unknown point. In order to reduce the large number of...

The paper presents a new method for reconditioning of automotive parts in an ultrasonic field by reworking. Experimental results were obtained in the case of using different material couples. Using three couples of different materials, three technological metallization processes were studied: - oxy-fuel flame and wire; - three-wire electric arc - oxy-fuel flame and powder In experimental work the following material couples were studied: X30NiMoVCr11-STELLITE 12 AWS, X30NiMoCr11-TP 4000, FxMo1Si24-STELLITE 12AWS. D...

This article summarizes and analyses some of the recent developments in strategies to prevent or reduce the effects of restrained volume changes on the behaviour of concrete mat foundations. Mat foundations are usually restrained to some degree externally or internally. For the evaluation of the influence of external restraint in mat foundations, friction and interaction models are introduced. Early-age cracks due to restrained thermal contraction can be serious because, unlike flexural cracks, they can extend thr...

The paper describes the technology of controlling a new material called Polytech used for the production of prefabricated units. Prefabricated units made from a modified Polytech mortar based on expanded polystyrene derived from recycling were used to build a residential object. Prefabricated elements are load-bearing and, at the same time, insulating elements in the form of wall panels. In order to control the prefabricated wall with a lintel under realistic conditions, a control technology was suggested that inv...

Dissolving pulp is widely used for the manufacture of functionalized materials competing with cotton and chemical fibers. One of the most widespread applications of dissolving pulp is the production of cellulose acetates. To produce high quality acetates the pulp with high cellulose content, high reactivity, and narrow molecular weight distribution is required. Conventional dissolving pulp process is based on the sulfite pulping or pre-hydrolysis kraft pulping. Further processing includes cold or hot alkali extrac...

Learning cycles in experiential education show a striking similarity to the PDCA (plan-do-check-act)-cycle in corporate problem solving as stated by David Kolb already in 1974. A cooperative/dual system involving multiple rotations with the same company offers an attractive framework to enhance corporate innovation processes by integrating the enterprises with the education of students. From the beginning in 2002 the cooperative/dual study programme Production Technology and Organization (PTO) at the University of...

The determination of the geochemical fractions of heavy metals in soils of technogenic landscapes is a key issue in the study of their mobility. The current study aims to investigate of the accumulation and mobility of Cu in soils adjacent to the Karabash copper smelter at South Urals, Russia. Studies were performed in the plume zone of the Karabash smelter and in the floodplains of Ryzhii Brook and Sak-Egla River for the surface layer of soil (0-5 cm). The level of Cu pollution by soil located at a distance from ...

Thermo-electric power stations using coal are very important and complex polluters, due to the chimneys for burning gas evacuation which represent the main high sources of environmental pollution, while the ash dumps пїЅ are lower sources. The Doice?ti thermoelectric power station built in 1952 is located in the Subcarpathian hill area, on the Ialomi?a Valley, constituting a source of heavy metals pollution of this zone. From the geographical viewpoint, the studied territory can be included in the Subcarpathian Cu...

In this paper a new method of dual-polarimetric SAR image coregistration procedures is proposed. Both cases - coarse and fine coregistration are considered. In the proposed approaches the widely used coherence parameter is not applied. Instead, the dual-polarimetric signatures are exploited. They allow to identify location of strong point scatterers within the SAR images. These scatterers can be further used in coregistration procedure as reference points. The developed algorithms described in this work were teste...

The condition of underlying rock and footing masonry affects significantly technical condition of historical monuments. The caused subsidence may affect the origin of construction cracks, which may directly influence its stability. These impacts are mostly indirect and they are difficult to identify due to information lack. Footing masonry and long-term changes in the underlying rock are hidden underneath existing ground and floor level. If records related to foundations do exist, they are frequently fragmental. M...

The characteristic thickness and type of intercalations is important when assessing the suitability of bituminous coal deposits for exploitation. The data on coal partings is of key importance due to a number of factors, including: the optimum selection of technological processes of exploitation, the quantity of resources, the quality of the coal output, the cost of production and processing of coal, and the variability of quality parameters of coal пїЅ in that case, the ash content in the examined seams is worth ...

Petroleum and its derivatives are the main source of energy for industry and domestic consumption. Petroleum hydrocarbons are based on multiple carbon bonds that develop intense and raised complex structures when they bound with other characteristic molecules, hence the latest hydrocarbons have variety of forms and consist of short, medium and long aliphatics, aromatics and polycyclic aromatic hydrocarbons of different proportions. The accidental release of these hydrocarbons into the environment represents a majo...

The copper ore deposit in Poland is mined by three underground mines using mainly group blasting technology, which serves as the active rock-burst prevention, aiming at distressing rock mass by means of vibration provoked with blasting. The mines belong to KGHM Polish Copper Joint Stock Company (KGHM). The paper objective was to determine the influence of the length of after-group blasting waiting time on provoked seismic energy in one of the KGHMпїЅs copper ore mine. It was necessary to investigate, evaluate and ...

Located in the northern part of continental Portugal, the city of Porto is characterized by low-to-moderate levels of seismicity, thus one of reasons for the lack of studies regarding the influence of site effects in this area. In this study, the HVSR technique (horizontal-to-vertical spectral ratio) was used in order to obtain information about the fundamental frequencies of the ground in several parts of the city which was later compared to the geotechnical information presented in the Geotechnical Map of Porto,...

The aim of this paper is to highlight the degree of connection between the kinematic and dynamic characteristics of sports technique used in acrobatic elements and the performances achieved by junior gymnasts in balance beam events. For this purpose we used the following research methods: bibliographic study of the specialized literature, pedagogical observation, video-computerized method, using пїЅPinnacle StudioпїЅ and пїЅPhysics ToolKitпїЅ programs, method of movement postural orientation and evaluation of spor...

The marine environment is considered to be a highly aggressive environment for metallic materials used in the construction of the various elements of the structures. The aggressiveness of the marine environment is given by a number of chemical, physical and mechanical factors. They make maintenance of structures to be very difficult and very high costs are allocated. The phenomena of degradation by corrosion at level onshore and offshore are favored and accelerated by a number of factors related to long periods of...

Costs constitute the basic economic indicator that affects the business activities of mining companies. Cost optimization in the mining company is a key factor of business and the goal to successful growth and profit formation. The costs of the mining company are high and costs affect negatively corporate profit. We will search costs in mining companies in Slovakia in area of small, medium and large companies. The goal of this paper is to find out the development costs in the mining companies in Slovakia relative ...

The management features of mining project life cycle are connected with unregulated periods of coordination, confirmation, certification, a time gap between development stage and project implementation, specific features of mineral deposit technological processes (overburden removal, mining, mineral processing). The Scheduling method does not take into consideration volatile deviations. Thus the management method of project life cycle is corrected by technicians of changes management. As a result it leads to signi...

The article deals with the cost-benefit analysis of Short Rotation Woody Crops plantations (SRC) for local supply chains and heat use. There are analysed benefits and costs (expenditure) from the positions of farmers (land operators). The cost-benefit analysis has been carried out by applying the method of discounted cash flow as this method allows assessing the entire life cycle of the plantations including initial establishment of the plantation and several rotation cycles. There are assessed the plantations in ...

End-of-life vehicles are one of the fastest growing waste streams in the world which should be managed correctly in accordance with Directive 2000/53 / EC on End-of-Life Vehicles, which aims to making dismantling and recycling of ELVs more environmentally friendly. Consequently, the treatment of end-of-life vehicles with the purpose of avoiding environmental pollution and to recover useful materials, especially metals is a major environmental concern. Hence recycling is essential method to solve this problem. It i...

The purpose of this paper is to present the flood hazard maps using 2D hydraulic modeling. Many economic, social, environmental losses as well as casualties, occur annually due to floods [4]. To reduce the risk of hazard, flood hazard and risk maps are required for different probabilities of their production and creating models that can predict floods in production time, based on information received from sensors located on watersheds. Very important for an effective management against floods have become nonstruct...

Contemporary digital cameras enable automated process of creating several photos of the same frame in different exposure (bracketing). By the post processing of the photo, editing it in tone mapping, correctly illuminated parts of individual photos are merged into a new one - High Dynamic Range (HDR) image. The differences between illumination of the parts of the object in direct sunlight and the one in deep shade result in a lack of recognizable details which creates challenges in photogrammetric interpretation. ...

The project focuses on the creation of a structure specifically designed to answer the needs of energy efficiency investment financing in the Rhodope Region of Bulgaria. The structure Rhodoshop aims to promote innovative retrofit financing and operational models tailored to local conditions. Rhodoshop activities are based on the concept of a one-stop-shop that provides technical, economic, legal and administrative expertise to develop investment project pipelines for building and street lighting retrofitting in th...

The Black Sea coastal zone of Georgia is especially valuable for its natural conditions and economic function. Concerning to the implementation of requirements of EU-Georgia Association Agreement the main guiding document regarding the marine environment is The Marine Strategy Framework Directive пїЅ MSFD which came into force on July 15, 2008. The goal of the Marine Strategy Framework Directive (MSFD) is to achieve or maintain Good Environmental Status пїЅ GES in marine waters of Europe (including Black Sea) not ...

On the basis of the system tests of pre-stressed anchors in the anthropogenic homogeneous earthwork, valuable material has been obtained to describe the rheological features of the trench with anchors. Anchors were designed as temporary construction. Anchors were made in compacted soils with no detailed geotechnical parameters. The soil material was treated at the design stage as having a significant random distribution of mechanical and physical characteristics. This resulted in the anchor system test being the b...

The main purpose of the research presented in this paper is to study of volume coagulation of bentonite suspension. The study included measurement of particle size distribution, chemical and phase analysis of prepared suspension, as well as preparation of graph and determination of dependence between concentration of the suspension and the turbidity. Relationship between coagulant dose and concentration was also determined. Also research on usage of a several different mixtures of two distinct coagulants to intens...

There are an industrial air pollutants as a new, negative factor in agriculture, reflected mainly in second part of the 20. century. There are thousands of hectares of uncultivated agricultural land as a consequence of this form of soil intoxication. There is also reduced soil fertility below the fertility level, on the another thousand hectares of soil, where is needed high energy excess in the form of fertilizers or agro-technical works. Physical and chemical properties of soils have been changed, erosion has be...

Raising the issue of the relevance of culture and peculiar behaviour patterns for taking effective action of individuals and professional groups is an extremely practically useful thread of the analysis of social functioning of a person living in the conditions of modern civilization. The concept of pattern assumes a certain, usually positive, method of its evaluation. Behaviour patterns usually will be transmitted in the area of culture including common environmental views among generations as a tool of a good so...

Historic military complexes form a separate typological genre, with unique hieratic site plans, stately yet austere stylistics and a multiplex functional program. They form a significant portion of historic landscape in garrison towns, as both material and immaterial heritage. It is essential, that as many of the complexes as possible are preserved to serve as historic links for future generations. Luckily, their innate characteristics predispose them to adaptations for diverse purposes once demilitarized. The pap...

Worldwide there is a need to develop new advanced materials based on silicone elastomers with high-performance properties, reinforced with nanoparticles. The curing process as a primary step has a major impact on the properties of the final product, including the determination of the optimal amount of reinforcing agent in the nanometer range and cross-linking agent (peroxides - specific to food, pharmaceutical, medical and consumer goods industries). The aim of the study is to obtain an antibacterial elastomer com...

Construction of green buildings has become a kind of global trend, but its implementation varies greatly by country and region, including the rate of growth in green involvement, triggers and obstacles impacting their growth. Green buildings gives to the forefront of energy efficiency also the impact of buildings on the environment, the environmental burden through production of raw materials and the impact of buildings on the whole region. Green building is therefore designed, built and operated also with regard ...

The aim of this study is certainly not to include and introduce various types of civic amenity buildings in terms of functionality and hierarchy, nor to investigate in detail particular types of civic amenity buildings. The aim of this study is rather to focus on the current trends in building types within the new public facilities, which are based on current problems, namely the lack of services and facilities which are being either supplemented with new ones or are completely replacing the existing, nowadays unu...

The present investigation was done to assess cytomorphologic and cell cycle parameters as indicators of genotoxicity as it is a simpler method and could be suggested for rapid screening of the vast range of agrochemicals used all over the world. The excessive and indiscriminate use of agrochemicals is responsible for increasing the level of pollutants in the soil environment resulting in cellular and molecular damage to the plants. Topas 100EC is a widely employed foliar fungicide for horticultural applications. A...

The article deals with the preparation of the Historical Atlas of the Czech Republic. The atlas will include maps displaying important historical events of the 20th century. The project is a follow-up to the successful Academic Atlas of Czech History, published in 2014, within which numerous classical and innovative maps covering selected events of the Czech history were created. The new Historical Atlas of the Czech Republic aims to extend and further develop selected 20-century topics from the Academic Atlas of ...

This article discusses typical problem of industrial floors, i.e. cracks. Slight cracks are usually effect of volume changes such as shrinkage and creep. There are also other reasons why cracks appear. For example: inappropriate design, heavier load than expected or wrong realization of the concrete slab. Cracks, which are caused by mentioned reasons, are wider and deeper. Wide and deep cracks can cause another defects such as concrete crumbling along the crack. They can be a problem for maintenance and service li...

History of exploitation of gold from Danube river sandy gravels is centuries long. Interesting on it continues to the 1970пїЅs. Extaction of heavy minerals (HM) concentrate was never intend. About 1 milion m3 of sandy gravels is exloited in Slovak part of Danube basin for construction usage. Production of HM concentrate with gold as by-product can improve economy of exploitation. With average content 6,55 kg of HM in m3 of sandy gravels there is possibility to produce about 6500 t of HM concentrate with up to 30 k...

This paper proposes an evaluation of data acquired with various sensors and used in coastal water segmentation applications. Correct monitoring of coastal changes in dynamic coastal environments strongly depends on accurate and frequent detection of shoreline position. Automatic shoreline delineation methods are preferable, especially in terms of time, cost, labor intensiveness and difficulties of in-situ measurements. Two main issues have been encountered within this application field, the quality of data and the...

This article provides a review of recent unfolding geopolitical situation on the world stage. China and Russia have taken huge steps to create alternatives to USD dominated trade and finance. Not too long ago surplus trade countries such as China, Russia and the rest had no choice but to buy U.S. Treasury securities with their surplus USD enabling U.S. currency printing and war waging. China and Russia have accumulated massive amounts of physical gold, amid increased economic sanctions and trade war with U.S. Join...