Browse

For generalized inversion, non L2-norm inversions have been widely used in geophysical inversion to obtain sharp and blocky models. However, problems such as the boundary of anomaly body obtained by inversion is not clear enough and the recovered residual susceptibility value is far less than or greater than the true susceptibility generally exist. In this paper a new 3D magnetic inversion approach based on residual node susceptibility is proposed. The residual node susceptibility model comes from residual block s...

Coal mining causes undesirable terrain subsidence due to caving in of the overlying rocks into the already excavated space. Subsidence deforms the terrain, damages structures on the surface and water flows, which results in the formation of inaccessible wetlands and swamps, and these areas need to be reclaimed. The problem of large flooded areas as a result of mining activities also concerns an area known as пїЅKozinecпїЅ, which is located between KarvinпїЅ and Doubrava in the Czech Republic. That territory has lo...

The major changes occurred in Romanian mining industry imposed by the transition to the market economy, concentration of extraction to fewer output units in deeper seams, the high gas emission rates and coal rank, other current specific trends requires new methods to produce the optimum design and operation of a safe and economic methane drainage system. Under the circumstances, the paper describes a mathematical model together with a computer-aided optimization strategy to assist the analysis of the differences b...

Testing and certification of explosion-proof electrical equipment required for product conformity assessment are extremely important, taking into account the unexpected hazard of explosion occurrence due to potentially explosive atmospheres generated by mixtures of air-gas/dust. The explosion risk has to be minimized in order to ensure the health and safety of people and for preventing material damages. The new European Directive which regulates the protection to explosion field is the ATEX Directive 2014/34/EU wh...

Changes of damage to the belt core that are not controlled during the exploitation can lead to dangerous accumulation of the defects (strains) in the cross cross-section. It can lead to serious weakness and even rupture of the belt. Early detection of the mic rodamage of the covers and evaluation of the increase speed of the damage allows the user to plan maintenance more precisely. Furthermore, it allows more effective cost management when conveyor belt maintenance is scheduled. In this paper, geometric data o f ...

Degraded post-mining areas have considerable potential for redevelopment. They are usually located in attractive urban areas and have convenient road and rail links to the rest of the city and other places in the region or country. These areas are often equipped with power, water and sewage systems. The redevelopment of these sites could take place in many different directions. They can be used to carry out production, service, commercial, residential and leisure activities. However, the unstabilized legal situati...

Conditions of the microclimate prevailing in mine workings are one of the most important factors influencing on the comfort and safety of the working mine crews. This climate depends on parameters of the ventilated air stream and conditions prevailing in these workings. Parameters having the most important influence on the conditions of microclimate are temperature of the air and rock mass, humidity, velocity of air stream and average temperature of radiation of wall surface of the working. Nowadays, due to the la...

The paper begins with the idea that in a large energy enterprise, formed by merging several energy companies with a mining company, the organizational culture is the key to success. The paper underlines the close connection between the organizational culture and the enterprise efficiency. The organizational culture supports the economic and social efficiency, the adaptability in the competitive context and the company which has a strong organizational culture may be saved from the consequences of unfavorable econo...

Rosia Montana deposit is made up of several ore bodies; the natural factors are characteristics of each ore body. The deposit is accompanied by an extensive area of hydrothermal alteration, whose distribution has a complex character. Fast alteration and humidity were one of the factors that have been taken into account in order to achieve quarry. The quarry platform has reached at the level of the upper bottoms in the breccia area, which involves passing to the exploitation of the reserves included in these pillar...

The article describes the chosen Japanese production and maintenance management philosophies, such as Lean Management, kazien and TPM. Japanese approaches to the process of work organizing and work planning, workplace preparing, tasks, duties and responsibilities turn out to be the most effective and the most efficient in the world. The practical application of these philosophies entails achieving the measurable benefits by the companies that use them. The basis of these philosophies is the elimination of all kind...

Since the beginning of deep mining for the acquisition of minerals or driving galleries, later tunnels, man has faced the problem connected with draining used and polluted air (the so-called mine air), and transport of fresh air to the workplace. Since time immemorial, mine air has influenced and prevented the work of miners and drifters, as well as of the mechanized technology. The most significant factors of air pollution include exhaust fumes of mechanisms used in the performance of work, blasting fumes and, ob...

The exploitation of copper ore deposits in Polish underground mines is performed primarily by the use of blasting technology which seems to be relatively well suited to the hardness of the local rocks and to local mining and geological conditions. Blasting works are also recognized as an active method of seismic events prevention, conducted as group strain-release blasting within potentially instable main roof strata and in pillars. A notable number of recorded dynamic events can be clearly explained by the blasti...

According Act No. 157/2009 Coll., on mining waste management, the Czech Geological Survey carried out a project of the Operational Programme Environment in 2010пїЅ2012. The project was entitled пїЅInvestigation of closed and abandoned mining waste facilities posing a serious threat to the environment or human healthпїЅ. The aim was to create an inventory of hazardous mining waste facilities and to develop a methodology for their assessment. In the Czech Republic, 300 potentially hazardous mining waste sites were i...

A conveyor belt in regular operation is negatively influenced by a number of factors. This negative influence is the result of coming in direct contact with the transported material, which frequently causes serious damage and reduces belt lifetime. The scale and type of this damage depends on many factors, such as a beltпїЅs physical and mechanical properties and its design. The properties of the transported material and the design of the feed point are also of considerable importance [4]. When the damage is cause...

This paperwork is based on the data emerged from a conducted research related to a moisture influence on ignition sensitivity of air-methane gas mixture. For the purpose of this demarche it were used method of signal processing approach as it is data filtering and mathematical transform of the experimental data. In the first part of the paper, it was presented the spark test apparatus used for the experimentation and the results of the experimental data obtained during the tests with mixture air-methane and moistu...

The balancing devices in cable tension, DEC's, linking the extraction vessel (SKIP) and cables binding devices, DLCпїЅs, and are designed to equalize the tension in cables of extraction plant (multicable). The paper presents a new solution design of the screw-nut mechanism of initial tension cable for the uniformity tension and horizontal positioning of the rocking mechanism. The extraction vessels cables are attached to those by means of binding devices and equipment. Binding devices and equipment should be safe ...

Ostrava city and Karvina city has a long history of mining. Over time in Ostrava there has been a decline in mining activity. But closed coal mine may be performed in the correct disposal of heavy burden on their surroundings. One of the biggest dangers are the outputs of mine gases. If gas leaks into a confined space, there is an accumulation of gas and may result in an explosion. The article presents two cases of methane explosions, which were noticed in the Ostrava-Karvina coalfield. Such an explosion had a dev...

The copper ore deposit in Poland is mined by three underground mines using mainly group blasting technology, which serves as the active rock-burst prevention, aiming at distressing rock mass by means of vibration provoked with blasting. The mines belong to KGHM Polish Copper Joint Stock Company (KGHM). The paper objective was to determine the influence of the length of after-group blasting waiting time on provoked seismic energy in one of the KGHMпїЅs copper ore mine. It was necessary to investigate, evaluate and ...

The management features of mining project life cycle are connected with unregulated periods of coordination, confirmation, certification, a time gap between development stage and project implementation, specific features of mineral deposit technological processes (overburden removal, mining, mineral processing). The Scheduling method does not take into consideration volatile deviations. Thus the management method of project life cycle is corrected by technicians of changes management. As a result it leads to signi...

The article deals with the examination of the state of the ball track at the heavy machine ZP6600/Z79. It gives results of material exams which were taken on given samples and it describes the progress and results of the numeric counting for the state of tenseness. The used method works with the ending parts at the bottom of part of the ball track when it touches the ball. The decision about the renovation of the track depended on the determination of the groove size degradation at the ball track. The material tes...

The subject of thin seams exploitation is complex problem, and in reality it encounters several problems such as technical, ergonomic, and economic barriers. They refer mainly to combined longwalls where human presence is required at the site, and the most important problem is the issue of limited workspace in the longwall roadways. It generates engineering and organizational problems, especially during the launch and removal of the longwall roadways. Having considered the abovementioned, the Department of Mining,...

Development of energy, nuclear, engineering, petrochemical and chemical industry requires very massive and large workpieces. Requirements for machining workpieces of these department is the necessary adapt to the design and construction of machine tools. Analyses were conducted to carry out the overhaul and modernization for heavy cutting machine SKODA W 200 HC with digital subtraction, turntable S 100 C from 0 to 360пїЅ, while the carrying capacity of the turntable 100 t. The complexity of the repairs consisted o...

Currently, worldwide companies engaged in mineral processing are more and more interested in ecological transportation systems that do not effect and pollute the environment during their operation. One important element of such transportation systems is feeding station, which ensures the correct implementation of continuous transportation system. Proper functioning also increases the efficiency and reliability in transporting raw materials. The article deals with own 3D engineering design of the feeding and fillin...

The mining companies are often faced with the requirement for bulky material transfer which is possible to realize using overhead travelling cranes. An overhead travelling crane has rectangular work space, which is characteristic for this type of crane. A part of an overhead travelling crane is also a crane crab. Crane crab movement is carried out after the double-girder crane construction and loads are displacing along the whole length of the crane. The aim of this paper is a proposal of 3D geometric model of the...

The article deals with the design of new technology for the treatment of thin-walled house for carrier pipe conveyor drive roller. Production on conventional machine tool is unsatisfactory because of the failure of the machine tool and the actual production inaccuracies. Conventional machine tools are being replaced by numerically controlled machines CNC OS which allow reuse through production and higher labor productivity. They were designed and compared the new CNC axes of different structures, appropriate tools...

We considered the problem of training personnel of mining enterprises in effective application of personal protective equipment for respiratory organs - regenerative self-contained self-rescuers based on chemically bound oxygen. The engineering design task of constructing a reusable self-rescuer simulator with chemically bound oxygen supply in the absence of regenerative chemical agent was formulated. The paper describes a new design of a self-contained self-rescuer simulator, which is equipped with electric heate...

The problem of visualization of fires is relevant to the design of emergency situation simulators for industrial facilities involving a risk of fire or explosion. The effectiveness of a simulator depends on the accuracy of animation (visualization) used in this simulator. The present paper aims to build a mathematical model of fire spread at industrial facilities with regard to the associated processes of smoke generation, release of toxic combustion products and their influence on physical condition of an individ...

Research concerning magnetic diagnostics of the conveyor belt with steel cords was focused on its sections. In this paper authors are focusing on the extraction of the diagnostic parameters for the technical evaluation of the condition of the splice in belt conveyor. Data used for the analysis were acquired from the belt core testing using HRDS system. Parameters that are used in this paper take into account and can define its condition in the specific locations. Parameters were analysed and research shown influen...

Hydraulic fracturing is a widely used in the hydrocarbon production industry to stimulate oil and gas flow from traditional and shale formations. This technique is one of the essential elements of borehole mining technologies and is designed for controlled impact on the rock mass during the development of solid, liquid and gaseous mineral resources. The creation of a system of traversing cracks in the rock mass that are parallel to each other is of great practical interest for many geotechnical issues such as impr...

Drilling rigs are one of the most primary equipment of the underground mining industry. Thanks to their application, it was possible to multiply several times obtained metal ore output generated in underground mines. For last several years, the research related to the development of special rigs predisposed to mine narrow vein deposits are conducted. Dynamic testing of one of such structures are discussed in the paper. The dynamic tests of the rig have been carried out in two ways - either as a real construction s...

Dust is one of the major hazards that affect workers in the mining industry. Currently, there are many technologies that help reduce the dust load on the miners. But looking at the statistics of professional and profession-related diseases, it can be seen that the incidence of diseases caused by various industrial aerosols is not reduced. This indicates that the existing methods are not sufficiently effective. It is not excluded that the very method of estimating the dust load on workers is not correct and needs t...

One of the key parameters of the mine, which affects the choice of the scheme for stripping and transporting ore, is its annual productive capacity. At the same time, the analysis of the experience of domestic mining enterprises using the underground mining methods allows us to say that the traditional and most common transportation methods are skip hoisting and road transport using underground dump trucks [1]. Along with traditional ones, there are progressive energy-efficient and poorly-staffed types of transpor...

The problem of stress state evaluation is really actual for the underground structures been exploited for a long time. Stress and deformation monitoring give opportunity for hazard prevention and planning operation mode of the underground facility. One of the most common methods of deformation control is convergence measurement, but transformation of measured data into stress state of underground structures is quite difficult. A technique for stress state evaluation of underground structures on the base of the ana...

Decades are mining raw materials from seabed deposits. We are talking about deposits which are on the interface of land and sea. These are placer deposits as heavy metals and gemstones, secondary deposits of limestone, phosphorus, salt and also beach deposits on the edge of the continents. In this article, the authors want to become familiar with both forecasting utilization of selected earth resources, but also want to point out new trends in obtaining them. In this article, we have a broad spectrum of earth reso...

Industrial ventilation is an extremely complex area and involving deep knowledge of fluid dynamics in the modern version (CFD), three-dimensional propagation of heat, complex flow of fluids, steady state in transient conditions, operating problems, contaminants inside the industrial objective, and outside respectively. Ventilation and air-conditioning installations in industrial conditions are designed to ensure the purity of the air and the corresponding inside environment for man's activity and the nature of the...

The article presents the research results on geomechanical processes related to the change in the stress-strain state in the rock mass during large-scale mining operations in highly stressed rock massifs. A geomechanical model has been created that allows considering the sequential development of a complex of adjacent deposits at the Khibiny rock massif. Based on the modeling results, the optimal order and direction of development of mining operations under rockburst hazardous conditions are determined. At that, t...

In this research the regularities of heavy oil conversion in supercritical water and the presence of finely dispersed caustobioliths and metal oxides were shown. The process of thermo-catalytic conversion was carried out in a closed reactor under temperature and pressure conditions, providing the transition of the aqueous phase in supercritical fluid. To investigate the selectivity of catalysts, different compositions of catalyst systems were prepared and studied for their effectiveness in the process of degradati...

The effectiveness of enrichment process of run-of-mine copper ore (at KGHMпїЅs ore enrichment plants) depends on the selection of appropriate working parameters of processing machines which are customized mainly to fit the fed rock type. Therefore, the knowledge of lithological composition of run-of-mine copper ore fed to the ore processing plant can significantly improve the effectiveness of the enrichment process. The issue of optimization of enrichment processes with the help of the use of in-situ sensor techno...

98% of total explosives used for civil uses are consumed by Polish mining plants, with 2.5 thousands of tonnes of explosives used in bituminous coal mines yearly. Bituminous mines are now facing the necessity of implementing a new project for preparing a system for recording the distribution of blasting materials. The execution of projects related to the implementation of new technologies at each organization, with Polish bituminous coal mines in particular, apart from problems related to legal, economical, techni...

In modern mining a tendency is observed to extend underground development of near open-pit reserves in thick ore deposits because of increase of open-pits ready to complete open mining operations or technical elimination. Researchers of Mining Institute KSC RAS have established that when developing the near open-pit reserves by mining systems of ore and country rock caving, the parameters of ore excavation and mining safety increase due to controlling ore drawing and constructing a thermal insulating layer. The ma...

Mining technical reclamation as the main technological process for the development of ore deposits with the open method, as well as the cost optimization of reclamation, taking into account possible technical solutions have been considered in the paper. The investigation proves that the time gap between the soil disturbance and reclamation should be minimal, that is, reclamation must be carried out not at the final stage of mining, but in the process of mineral mining. The reclamation time is directly related to t...

Despite of the significant reduction of the injuriesпїЅ number in recent years, Poland belongs to the countries with high rates of accidents at work. One of the leading industries in accidents at work is hard coal mining. The accidents occurring, their effects, and the poor condition of health of employees (due to working in adverse conditions of physical work environment) are the cause of significant financial loss of victims, their employers, and also the entire society. Therefore the question is: what action sh...

One of the commonly present gas hazard in hard coal mines methane hazard. The most endangered region by this hazard, during ventilation of longwall in пїЅU from boundariesпїЅ system is the crossing with ventilation roadway (so called пїЅupper corner of longwallпїЅ). Accumulation of methane in this place results from its release from goaf. Therefore, in order to decrease methane concentration in this region, auxiliary ventilation devices are used. They are aimed to supply to this place such an amount of fresh air, ...

The quality of bucket wheel excavators (BWEs) operations is largely influenced by the physical-mechanical (structure, mineralogical composition, plasticity, anisotropy, degree of fracturing etc.) and technological properties (compressive strength, tensile strength, shear strength, compaction, consolidation, cutting resistance etc.) of the rocks. If the excavated materials are relatively homogenous, without intercalations with excessive cutting resistance, it is not difficult to conduct the technological process. I...

In accordance with the developed methodology for a comprehensive solution of issues of mineral deposits development in the Russian Arctic zone, a list of criteria has been established that allow evaluating the priority of nuclear power sources in solving problems of power supply to the Russian Arctic regions while developing the deposits and performing a ranking of the various reactor plants. The list is based on information technologies modeling objects, production and processing of raw material and geoecotechnol...

The authors have carried out uniaxial compression tests of 200 mm side cube specimens made of artificial layered geomaterial with the bedding angles of 0, 30, 45, 60 and 90 deg and with the different strength of the layers to study the process of deformation to failure using the multiparametric equipment designed for synchronous recording of physical fields of stresses, macrostrains, microseismic emission (MSE) and microstrains by speckle method. The integrated analyses of MSE signals, microstrains, stresses and s...

Schemes of mining and construction operations have been developed for inclined trenches on the open pit edge, where transport platforms and safety benches using the drilling and blasting method of rock mass preparation are located. The volume of mining operations is calculated taking into account the dislocation of a part of the open pit edge of the deep open pit mine for placement of loading points at the bottom of inclined workings. A new scheme of conducting mining operations implementing steeply inclined conve...

The article presents the results of asymmetrical disk tools laboratory tests. This type of mining tools can be used for mechanical mining of hard rocks, among others in the solution of innovative roadheader head, presented on SGEM conference in 2016. The study was conducted at a dedicated laboratory stand, with an installed drive power of 80 kW. Stand consists of rotating rock sample, mined by special plate equipped with asymmetrical disk tools. The rock is mined using undercutting technique, also known as Wohlemy...

Conveyor belts operated on belt conveyors are subjected to a variety of loads that lead to damage. Belts undergo wear in a process that depends on the type of conveyor, its length, the material transported and the working site [2, 3, 5, 8]. Laboratory evaluation of a conveyor beltпїЅs lifetime requires determining a number of its properties, such as tensile strength, longitudinal and transverse elongation strength, delamination strength, shear strength, flammability, and resistance to low temperatures, as well as ...

The worldwide development of studies concerning volcanic-related deposits caused renewed interest in epithermal mineralizations in Sardinia and a prospecting program was developed in the eighties. A series of field surveys showed that hydrothermal alteration halos are widespread in the Tertiary volcanic terrains, and AuпїЅAg bearing mineralized outcrops were detected in a few localities. An exploration program was performed which reached the ore evaluation stage in two areas. The first economically viable gold dep...