Browse

The parameters of extraction from aqueous solutions into the organic phase of iron, aluminum, manganese and titanium are determined from the pH and concentration of the extractant when they are extracted with oleic and naphthenic acids, as well as olive and sunflower oils. The values of the thermodynamic functions of extraction equilibria with the participation of carboxylic acids and natural oils are taken as the basis for constructing the extractability series, which makes it possible to determine the thermodyna...

This work aims to analyze in terms of phenolic compounds of beverages obtained from indigenous plants, plants that are known in the specialized literature as being rich in bioactive compounds. Frum (2016) developed the identification method of the phenolic compounds, and this was based on a HPLC system, produced by Agilent Technologies 1200 Series, equipped with degasser, quaternary pump, DAD detector, automatic sampler with thermostat and column compartment equipped with thermostat. The measurements that were mad...

In the paper the results of the study of the crack resistance of circular shaped fiber reinforced concrete tunnel linings are presented. On the basis of laboratory testing of linings and numerical simulation of their behavior (FEM) is shown that the deformation of fiber concrete can be considered as the deformation of solid, elastic, homogeneous medium. In addition, the analysis of stress?strain state of these linings shows that their failure is caused by stable propagation of the single crack, which usually forms...

The authors have revealed particularities in destruction of the rock mass by the system of borehole charges and substantiated the least seismic hazardous blasting schemes which allow decreasing out-contour disturbances and providing more qualitative crushing of rock mass. It has been shown that for the boreholes with 250 mm diameter the least seismic hazardous blasting scheme is one with borehole line placed at the angle of 105? to the bench wall. At that, the stress level in the out-contour rock mass decreases by...

The e-learning system eLogika serves for teaching logic. In the system there are study materials at students? disposal, but it also provides online tests and promotes all the activities in which the students can obtain their credits. The system collects data about users who are logged in, e.g. time spent on a particular activity, the number of activities performed by particular students, what data is a student interested in, etc. The goal of this paper is to describe the application of many-valued formal concept a...

Research aimed at testing new PIONEER oil rape hybrids cultivated on three different fertilisation rates in the soil and climate conditions of the Banat?s Plain, near Jebel, Timis County, Romania. The soil is a typical cambic chernozem, moist phreatic, pH 6.21, and 2.07% humus in the Ap horizon. The climate in the area is moderate continental with little Mediterranean and ocean influences favourable to oil rape cultivation. The trials organised between 2014 and 2016 were bifactorial, with Factor A represented by t...

The article presents a study on a geospatial distribution of Catholic sacred buildings within Volyn Oblast in Ukraine. A a map of geospatial distribution of Catholic Churches was carried out by a vector graphics editor ?CorelDraw X5? on the basis of architectural monuments list of national and local importance of Volyn Oblast in Ukraine. Was created a map of geospatial distribution of Catholic Churches within Volyn Oblast in Ukraine and has been calculated their quantity and index of percentage. On the basis of su...

National wealth of a country is represented by land and existing buildings on its territory. At present, Romania, records of land and buildings is achieved through systematic cadastral works. The objective of systematic recording is the free registration of all properties situated in the extravilan, in the Integrated System of Cadastre and Land Registry. The technical works will be initiated by the Territorial Administrative Unit at the cadastral sector level. The ultimate goal of this work is represented by the p...

The present paper uses microsimulation softs to identify the main problems regarding the speed humps location and proposes some improved solutions, with effects on traffic, pollution and safety. This paper also defines the notion of "speed hump", its main advantages, disadvantages and some implementation requests. The most accessible measures to increase road safety, both in economic and design terms, are the traffic calming measures, such as speed humps in different shapes and sizes, low-price solutions with sati...

We analyze source spectra of 30 moderate earthquakes (M ? 4.0), occurred in Albania during the period 2009-2015, with the aim to estimate their dynamic source parameters. Using broadband seismic records (BB) of Albanian Seismological Network (ASN), along with those from other regional ones, data representative of local tectonics of Albania, are selected. To achieve the displacement source spectra S(f) of S-wave, we adopted the Brune ?-square model, after correcting for instrument response and path effects. Obtaine...

Based on lithological and geophysical logging data obtained from shallow and deep boreholes drilled in the Republic of Moldova, Ukraine and Romania, it has been possible to map out the distribution of Ediacaran deposits across the south-western part of the East-European Platform. The Ediacaran sedimentary strata extend throughout the studied territory. Complete sections generally have a thickness of between 400 and 500 m, with a monoclinal dip of less than 1° from north-east to south-west towards the Carpathian Or...

In food industry water is used as a raw material, as a solvent for substances with different density when washing products and equipment, as transport water or merely cooling water.Quality monitoring of the hygienic drinking water and the waste water discharged is one of the conditions requested for all producing, processing, storing, keeping, shipping and marketing product supply units. The increase in acquisition, application and development of knowledge, advanced services and techniques in the fields of environ...

We offer two approaches for construction of block lithosphere models. First is for selection of blocks in mantle only, it is applicable to both two- and three-dimensial models. Second method (3D) helps to select blocks related to known tectonic structures. Usual approach for tectonic maps construction is the gravity field analysis. However, this method is significantly limited because the gravity field includes integral information about density features in lithosphere. This makes impossible to split selected tect...

From year to year cities are becoming the environment of constantly increasing number of people. The recent growth of special interest to studying the problems of urban environment and storing all possible information concerning the adaptation of flora and fauna to existing in tense contact with man prompted the appearance of a specific scientific aspect in modern geourban studies dealing with exploration of the development of various territories with urbanized landscapes. There have been determined territorial fa...

In the Czech Republic, the production of energy using fossil fuels - particularly coal - is still a major proportion of total production. The energy sector is and will remain one of the most important areas of the Czech economy, ensuring supply of electricity and heat to the population and industrial enterprises. In the power and heating plants is burned primarily domestic brown coal mined in opencast mines in the north-western part of the Czech Republic, namely, Usti Region. For combustion of biomass in the Czech...

Mining and processing activities are accompanied by air pollution. The paper assesses air and soil quality on the territory of copper-sulphide ores mining and processing plant in 2010?2013. The mining enterprise consists of a quarry, reclamation plant with a tailing pond, experimental-production facility for heap leaching and an underground mine under construction. The deposit has six ore shoots. Three of them are now excavated by surface mining, the underground mining techniques will be used for the others. Proce...

This paper aims to identify the degree of resistance of cryogenic soils exposed to chemical contamination from the Nurbinsky extractive plant in Western Yakutia. It examines the resistance basing on the sorption capacity of soil material, and also assesses their ecological and geochemical state. In this paper we consider homogeneous suprapermafrost-gley, gley podzolized and homogeneous non-gley types of cryozemes. A total of 16 full-profile soil cuts and 185 small trenches were made in depth of 0-10 cm and 10-20 c...

In the underground mining there are many sources of water hazard. Among them, there are water hazards from underground water reservoirs, located in old workings. Mine water inflow from such reservoirs can occur within a few seconds. Within the moments of a sudden and large water inflow, it is most often impossible to withdraw a crew from an endangered front of a mining excavation. In order to eliminate existing water hazard, exploratory boreholes drainages of water reservoirs are performed. In this paper the autho...

The main problem in applying existing geomechanical software suits is the fact that the process of developing the starting geological and structural model of a deposit is extremely complex, which is due to lack of automation in collecting separate data on initial geological and geomechanical conditions. The purpose of this research is to develop a software suite for detecting zones potentially prone to rock bursts. The research methodology includes analyzing causes of mine destruction and identifying the most infl...

One of the directions of rational use of energy resources in the field of drying of wood is the use of the managed heat pumps having the considerable potential for reduction of primary energy consumption when drying. Heat pumps can be used in combination with traditional fuel or electricity as an additional power source, or to act as the independent generator of heat and at the same time as draining device. The advantage of heat pumps is lower energy consumption for each unit of remote moisture, more exact managem...

Study of soil cover is particularly important for solving the occurred problems from implementation of infrastructure works of the roads. The soil cover is at the upper part of the Earth's crust and has distinct properties morphological, mineralogical, physical and chemical differences due to climate, relief, waters. The interrelatedness of the various geomorphological, climatic, hydrological and soil factors and the human factor, resulted in a wide variety of soils with specific and constantly evolving. In Timi? ...

The aim of the work is to assess consequences of polychaetes Marenzelleria spp. invasion for the Gulf of Finland ecosystem in a future climate. With this objective benthic submodel of the 3-dimentional eco-hydrodynamic Saint-Petersburg Baltic sea Eutrophication Model (SPBEM) was applied. In the model 4 numerical experiments were carried out: 1) 2 control runs excluding the effects of Marenzelleria spp. under two different scenarios of global climate change (based on ECHAM5 model of Max Planck Institute of Meteorol...

The article describes the results of the research project "Development of new technologies for surveying and cadastre", has been solved under the program to support applied research and experimental development "ALFA" and the provider of support Technology Agency of the Czech Republic. The aim of the project was to develop in the years 2012-2015, new technologies and software support for traditional surveying work such as documentation of detailed survey of changes, survey sketches, laying-out buildings, creation ...

In the present work, polymer-silica hybrid latexes based on methyl methacrylate (MMA), butyl acrylate (BuA), 2-hydroxyethyl methacrylate (HEMA), and different inorganic precursors (tetraethoxysilane (TEOS), isobutyltriethoxysilane (IBTES), diethoxydimethylsilane (DEDMS), vinyltriethoxysilane (VTES)) were synthesized by emulsion polymerization and sol-gel process. The resulting latexes were characterized both as materials placed into plastic vials and as films deposited onto clean glass slides by various techniques...

Crisis management is closely related to the emergency event prevention, crisis reaction and after crisis prevention. Each country within its legislative frame has involved certainly higher competencies of Rescue system forces, Integrated system forces or firefighters who are mostly acting part of Integrated rescue system in Slovakia. Recently there is a negative trend in European cities connected to aggressive behaviour against firefighters disabling them to do their job. It was also observed and very well describ...

The combination of wood-PVC was used for the first time at an outdoor fire test on a reduced scale. From a scientific point of view, there is a strong the need to repeat similar fire test with a combination of materials that occur in the interior of buildings. It opens the opportunity to confront theory with the results of similar tests carried out. The combination of traditional and modern materials in interiors of buildings occur very often. Both wooden and or wood-plastic composite materials are mainly used to ...

The increased requirements to the strength of products from glued wood, in particular to plywood are imposed at the modern wood processing factories. The data on the development of high-strength plywood materials with the use of new intensive technologies are presented in the article. For creation of high-strength plywood polarization is used in the course of production of plywood. Polarization was carried out by means of fixed electric field. It is revealed that process of polarization exerts positive impact on a...

The pea production is influenced both by the soil tillage system and climate conditions during the vegetation period of the crop and by the degree of infesting with disease and pests of the crop. The control of pests and pathogenic agents in the case of pea crop is important in order to avoid production and quality losses produced by them, as it is known as a sensitive crop. The paper presents the influence of the soil tillage system (conventional, minimum tillage and no-tillage) applied to a phaeosiom from the Tr...

This study deal with numerical investigation of river sea interaction. River mouth modelling is one of the most complex problem in coastal engineering because of meteorological and oceanographic uncertainties. Although river-sea interaction has been complex problem, these areas have significant importance for human life such as dense population near this places, environmental importance, transportation etc. During the river?sea interaction numerical modelling just one defined or steady condition modelling is never...

The article presents results of using vibratory jaw crusher for feed preparing for the granulation process. The main aim of the study was to determine the possibility of preparing the limestone feed for non-pressurized granulation process by means of very fine crushing in the laboratory vibratory jaw crusher KW 40/1 with kinematic actuation of jaws. The crusher is characterized by high average degree of fragmentation (30-50). The study was conducted in two stages. The first stage included experiments with vibrator...

In this paper, it presents a modality for verification of conformity the parts which are achieved on CNC machine tools, modality which takes into account the production process capability. By this control method it determines the capability of the technological process of making the piece, it can be applied either on the technological process flow, or on reception of consignments of products. As the case study, it was considered a piece ,,end effector,, used in industry building of machine, whose volume of achieve...

Calibrations of liquid flow meters are performed with primary standards that are based on measurements of the fundamental quantities; mass and time. Flow meters calibration are accomplished by timed collection of the measured mass of water flowing through the meter under test. Static gravimetric liquid flow meters calibration method is used as primary liquid flow standards. The method is based on the principle of measuring flow rate by static weighing and consists in: determining the initial mass of the weighing t...

Starch is widely used as a biodegradable component in the production of modern packaging materials. Determination of starch is necessary to control the stage of production of starch-containing materials, as well as to assess their biodegradability. The main process leading to the destruction of biodegradable composites is the biological degradation of starch under the influence of enzymes when starch-containing materials are located in the natural environment. Two types of starch-containing packaging materials wer...

Some of the most promising areas for the extraction of heavy oil, maltha and asphalt in the eastern part of the Siberian platform are the southern and southeastern slopes of the Anabar anteclise. Using solvents for mining heavy oil and natural bitumen in a permafrost zone is the only option to steam injection, which is obviously cost ineffective there. Advantages of the solvents include convenience of transportation to field and storage stability. Moreover, the solvents have sufficiently high solubility with respe...

The fractional composition of the chamber product of sulfide flotation was investigated. Grain size of the product varies from 0.2 to 0.05 mm. The characteristic of mineral composition showed that forsterite content is about 53%. The amount of other silicates (pyroxenes and garnets) is more than 20%. Two morphological generations of baddeleyite have been identified, it will be necessary to take into account physical and technological properties of the generations when developing technological solutions for gravita...

The research conducted at farms in mountain areas have shown that the average age at first calving is 849.15 days (28 months and 5 days). The variability of this index is extremely large with the minimum of 570 days (19 months) and a maximum of 1350 days (45 months). It follows that the average age at first breeding would be 18 months and 10 days. At first glance this figure fits perfectly within the limits recommended by the literature, but the reality is different. Because of the desire to have the calving group...

The majority of current water quality measurements are based on the traditional in-situ point sampling and laboratory analysis of the samples. This method, besides being time and financially more consuming than the remote sensing, also very often lacks a sufficient spatial and temporal resolution to adequately analyse and describe different phenomena (i.e. eutrophication). In this study, we have assessed the possibility to use air-borne hyperspectral remote sensing for mapping concentrations of different water qua...

The quality of bucket wheel excavators (BWEs) operations is largely influenced by the physical-mechanical (structure, mineralogical composition, plasticity, anisotropy, degree of fracturing etc.) and technological properties (compressive strength, tensile strength, shear strength, compaction, consolidation, cutting resistance etc.) of the rocks. If the excavated materials are relatively homogenous, without intercalations with excessive cutting resistance, it is not difficult to conduct the technological process. I...

Since 1860, phenol has been in production, with its basic use as an antiseptic. During late 19th century and thereafter the use of phenol has been further extended to the synthesis of dyes, aspirin, plastics, pharmaceuticals, petrochemical and pesticide chemical industries. In fact, by 2001, the global phenol production has reached an impressive 7.8 million tons. Among the different organic pollutants in wastewater, phenols are considered as priority pollutants since they are harmful to plants, animals and human, ...

In this study, the geomechanical properties of the heterogeneous limestone rocks in ??rnak coal mine roof cemented at cracks and the effect of the qualities of cementing paste fill on strengthening by the different silica fume paste were investigated. For this purpose, uniaxial compressive strength, point load strength, impact resistance, friction with Abrasion Loss, Impact Abrasion Loss (Los Angeles Assay) tests were managed following the cemented 50x50x50mm blocks. Even the physical properties; density, water ab...

New materials based iron powder, with several addition elements obtained by powder metallurgy. The sample were obtained by compacting of 500 M Pa , obtaining a sampless and sintering in dry hydrogen atmosphere at the different temperatures. The sintered samples were metallographic prepared by polishing in order to investigate the porosity and evaluate the microhardness of individual grain and structural constituents. I am studing the effect of addition elements on Rockwell hardness and microhardness. Hardness is t...

The developed bank ASTIOB of the coordinated thermodynamic information consists of five databases ? for inorganic and organic individual (including unstechiometric) condensed compounds and gases, and components of aqueous solutions. For each of the condensed substances is given its chemical formula, standard enthalpy ?{ f H????} and Gibbs energy ? {f G????} of formation, entropy {S????} , and also for each of phase (agregate or structural) states - appropriate binary index, enthalpy ?{trH?T} of polymorphic or agre...

The main purpose of this research is to analyse the influence of different natural aggregate sources, as well as different bitumen types, on the adhesion and affinity between the two materials and on the properties of stone mastic asphalt (SMA). The aggregates used in this study were both fine (sand 0/4) and coarse (4/8 and 8/16), extracted from four different natural rock quarries in Romania, selected after a geographical, geological and geomorphological analysis. From a petrographic point of view, the rocks extr...

The aim of the study was the analysis of subfossil Cladocera community of the Kotovo lake (Kharbey lakes' system, Bolshezemelskaya tundra) and the qualitative rating of the changes in it and in the region of study. The relevance of the work is associated with the increasing interest to the study of the climate change on the example of the North intact territories, along with the insufficient knowledge of the biota of the area being studied. The predominance of some species, zoogeography and biotopic attachments of...

Based on a real-life example, the report presents the methodology and the process of adapting in situ measurements from static CPTu probing for an application in a design process, using direct methods of driven pile capacity estimation. The report discusses two approaches. One of them is based on a real-life original CPTu measurement involving preliminary soil assessment while the other one is based on the initial averaging of the measurement values qc and fs. The paper provides methods of averaging cone resistanc...

Historic parks are an important element of Poland's cultural landscape. Unfortunately many of these entities require urgent conservation intervention. The research presents the possibility of using GIS tools in the process of restoration the facilities. For the analysis were selected parks in Olsztyn, Mortegi, Boze and Patryki. In the article are described selected features of GIS tools that improve the preparing process of restoration projects and limits occured during using this type of software. Restoration of ...

This paper presents the integral equations of the direct problem of magnetic prospecting with respect to demagnetization. These equations are derived for a two-layer medium model. The method of determining the intensity of a secondary magnetic field for the case of magnetizing by a static field, which potential is a harmonic function, is described. The respective integral equations are written based on the theory of a simple layer potential. An iteration algorithm for solving the three-dimensional structural inver...

The drinking water demand of most Estonian communities is covered by groundwater abstracted from the sedimentary rocks. Due to the climate and small population, Estonia?s fresh water resources are sufficient. However, Estonia faces a number of problems with natural groundwater quality in some areas. Fluoride concentrations up to 7 mg/l are recorded in western Estonia and deeper portion of the Silurian-Ordovician aquifer system, which consists of diverse limestone and dolomite. Fluorine contents in carbonate rocks ...

The article deals with of a hydrogen pressure vessel suitable for high pressure of approximately 75 MPa. One of the goals is to design a vessel from materials whose strength will meet mechanical requirements a calculated in both analytical and numerical ways. Another objective is the simulation of the design the pressure vessel with regard to safety and weight requirements.

This article aims to assess the actual possibilities of thermal degradation during the processing of the plastic and the mixed plastic waste. For these materials, it can be problematic to find utilization in some of the available recycling processes. These selected materials have been processed in the prototype unit for thermal degradation in the non-oxygen environment. This technological equipment is designed for continuous feeding of the input material, the retort is heated by flue gas from natural gas and the d...