Browse

Various methods are used in the mining of minerals, where the transport of material is an integral part. This paper deals with the transport problem of backfill material from surface stock to underground tank. To solve the problem is applied the capacitive calculation of transport using 2 trucks and a loader. The calculation is complemented by graphic models. The backfill material is available on 5 surface stocks. It is possible to transport the material directly to the workplace from each heap, which is not effec...

Natural sources can contribute with significant radiation quantities toward the total radiation exposure that humans receive. The majority of this natural radiation is harmless to humans in the ambient environment. However, radon, a large component of the natural radiation which humans are exposed to, can pose a threat to the workers health when radon gas accumulates in poorly ventilated occupational settings. Radon is the most hazardous natural source of radiation. Even if it is an inert gas, having no color, tas...

This article is intended to bring closer the raw materials policy of the Czech Republic, which is part of the European Union, so the article also refers to marginal and raw material policy of the European Union and secondly it is the aim of article introducing potential sources of mineral resources in our territory. Raw material policy can be understood as a political, legislative and administrative framework for reliable, affordable and long-term sustainable supply of raw materials. Raw material policy is a strat...

The companies need to change in order to be competitive on the current market. There are multiple ways to change in order to face the market. One of the most efficient instruments is organization development which refers to increasing the individual, group and organization performances, to improving the organization ability to respond efficiently to outside changes. The organization development refers to increasing the internal capabilities, ensuring that the organization structures, human resource systems, posts,...

The paper deals with the negative effects of mining on the transport network in the Moravian-Silesian area, especially is focused on problems reflected in construction layers of transport-related structures (railways, roads, area storage and handling areas). With the extraction downturn, the sources and objectives of transport have changed including the characteristics of transport flows of all traffic roads and connections. Various measures for all transport modes situated in Moravian-Silesian region are identifi...

The target of this article is the presentation of the first steps of solving the project No. TH03020368 from the programme EPSILON titled ?The optimisation of the shape and material of ground and mining machines research?. The main topic of this article is the optimization of the tooth shape and primarily the optimization of the materials used for manufacturing of cutting bodies of the ground and mining machines. This research is necessary for increasing of efficiency of mining process in conditions of the Most Ba...

Under intense stress, energy consumption undergoes essential changes that largely depend on functional characteristics of the respiratory system, which in turn are in close correlation with the body?s training degree and physical demand. During a pronounced dynamic effort, there is a progressive decrease in blood oxygen saturation and an increase of pulse. Cardiac rhythm is a physiological parameter commonly used in telemonitoring as it allows the assessment of rescuer?s general condition, heart rhythm disorders b...

In the combustion processes the nature and concentration of the developed gaseous effluents depends on the type of materials that are subject to combustion as well as on the conditions in which the oxidation processes take place. The purpose of this paper is the experimental determination of the combustion parameters and the study of the developed gaseous effluents from several combustible materials. The production of gaseous products resulting from combustion results in different yields depending on several param...

Production and consumption of electricity is, in contemporary society, the significant technical indices and social level you have reached. The use of electricity involves electric power systems (ESS), representing the large technical systems, which shall incorporate the Assembly plants for the production, transportation, distribution and consumption of electricity. Within the framework of the ESS are retrieved hydroelectric power plants (CHE), which represents about 25 percent of the installed power in power stat...

The decisive factor in the process of under pressure networks inspection is determined by the correct choice of the control method in order to observe with great attention the possible faults caused by the physical wear and tear resulting from the long use. Emphasis is placed on safety conditions of under pressure equipment, which include mandatory minimum technical requirements for periodic checking of under pressure networks for pressurized, liquefied or dissolved gas. Defectoscopy is a set of procedures used to...

Methane gas, one of the underground mine atmosphere, is the main hazard for the workers in this field. The risk of occurrence of an explosive atmosphere and the consequences are different from one mine to another, based on the mine type, its configuration, the extracted coal and the probability of the methane and coal dust occurrence. With every prevention measure taken, the potential risk of an explosion cannot be excluded from the firedamp mines, just reduced as much as possible. The controlled researches regard...

Protecting human labors process seeks to eliminate and/or reduce the potential causes of injury and disease in order to achieve full control of risks from hazards associated. With all the technical progress and technology in most industries, and especially in the oil and natural gas, there are failures with casualty and property damage. For this reason, it is indispensable the presence of the special intervention and rescue teams to limit/ liquidation, failure that generates explosive atmosphere and/or toxic and r...

A wireless system of continuous monitoring of pressure in a leg mounted in a powered roof support was designed in order to ensure the continuity of longwall coal mining process. Wireless multi-channel signal transmission in the longwall was applied for the first time. The extension of the power cell enabled maintenance-free use of the system and ensured comprehensive control of the support. The presented system monitors the pressure value in the spaces under the leg?s piston mounted in a powered roof support as we...

Fuel and energy management and related energy security are key issues for every country. The selection of energy sources used by individual countries depends on the possessed resources of energy raw materials, the economic position and, to an increasing extent, the approach to environmental protection. These factors shape the so-called energy policy of a given country. In the case of Poland, this policy is based on conventional energy sources. The main energy resource of the country is hard coal, the extraction of...

One of the major problems associated with exploitation of the copper ore deposit in underground mines in Poland is the local disturbance in a state of stable equilibrium manifested in a sudden release of strain energy stored in the deformed rock mass. It occurs mainly in the form of dynamic events which may result in rockbursts and roof falls. In order to face this threats, a number of organisational and technical prevention methods are applied in mines. It should be also noted that the greatest difficulties with ...

The subject of this paper is the assessment of the influence of the construction and design elements on traffic safety at level crossings in undermined areas. The first part is dedicated to level crossings in the Czech Republic and accident rates at level crossings in the Moravian-Silesian Region. The following part describes the in situ experiment, which was conducted at selected crossings with different types of safety arrangements, intensity of traffic and traffic moments. Our results were compared with the res...

Extraction of the copper ore deposit in the Legnica-G?ogow Copper Basin in Poland is usually associated with high seismic activity. In order to face this threats, a number of organizational and technical prevention methods are utilized, from which blasting works seem to be the most effective. A significant number of recorded dynamic events may be clearly and directly explained by the effects of this approach. It is also expected, that the simultaneous firing of a number of mining faces may provide the amplificatio...

For underground extraction of coal are running a complex network mining vertical, horizontal and inclined role extraction, transportation and evacuation on the surface. Associated system of mining works has the ventilation network to ensure the oxygen necessary for workers, diluting explosive gases and toxic substances and evacuated heat and humidity from the underground. For air evacuation from the underground workings, from the point of entry of fresh air to the polluted air exit point, is used powerful fans loc...

This article presents the analysis of the existing schemes of mining, logistics and consumption of fuel in North Yakutia which ones are form technological chains unique in complexity of management. This is due to negative impact of a large number of analyzed factors. The general trend is towards to reduction of coal consumption in hard-to-reach regions. Therefore, local coal deposits near the key points of consumption are not developed. Geotechnical and economic indicators of small-scale coal mines are generally l...

The paper presents results of experimental study of microstructural changes in rock specimens under the effect of high pulse pressure due to shock waves. Specimens of strong rock and coal were placed into special steel preservation ampoules. Shock waves were generated by explosion of trotyl blocks. The study involved electron microscopy, micro- and nanoindentation and laser spectroscopy of particle size. Images of specimen surface fragments were obtained by electron microscopy at various scale levels before and af...

Introducing new technical solutions into practice is inseparably connected with a number of problems. In addition to obvious concerns about the quality, reliability and effectiveness of the solution, there are also social problems. They are related to distrust of employees regarding new solutions and is caused by a limited knowledge about the introduced product which is related to employees' concerns that such a product may disturb the existing state of balance. Therefore, in the case of introducing a new solution...

It is generally recognized that bus drivers are potentially being exposed to daily vibration levels higher than recommended by the international guidelines, especially on certain road types in the urban context. The literature shows up that the whole body vibrations exposure may contribute to low back pain and produce negative effects on the human health. The principal issue about the relationship between exposure and biodynamic response has not been clarified yet. The purpose of this paper is to determine the lev...

Impact of horizontal stresses on stability of underground workings in mines is a very important issue in underground mining. Identification of the initial state of stress in the rock-mass should be one of the main actions taken into account while designing and carrying out the mining activity in underground mines. The paper presents the azimuths difference method. This innovative method can be used to estimate numerical quantity of the perpendicular and parallel horizontal stress around underground mining excavati...

The paper presents the results of the analysis of the accuracy of estimates of copper resources in parts of a Cu-Ag deposit in the Lubin-Glogow Copper District (LGCD) (Poland) where samples were not collected (test areas). The estimation was based on the samples collected from excavations surrounding the areas scheduled for mining activities, while the evaluation of the accuracy of the estimates was based on data obtained during the exploitation. The estimates of resources in the examined area were based on a 3D s...

This paper addresses mechanisms of destruction of methane-saturated coal at micro- and macro-levels under dynamical impact due to methane transition from its natural bound to a free state. The focus is on possible destruction of practically impenetrable (crushed and pressed) coal. Our study is based on analysis of experimental investigations and computed modeling. The experimental investigations involved experiments with rock pre-cracking under explosive impact and analysis of photo images of coal microstructure a...

In order to ensure energy security, at national level, coal constitutes an important source, though its share in the energy mix is reduced in the past few years in favor of clean technologies and on the background of the fall in the energy consumption. Where can be located in the project of energy security, the production of coal, exploited in the mining units in the Jiu Valley and valorized at the two power plants, Mintia and Paroseni-components of the Hunedoara Energy Complex, amid the request for intervention f...

High level of mining in Polish copper mines, in the Legnica-Glogow Copper Belt (LGOM), caused an increasing amount of mining works to be carried out in difficult geological and mining conditions, for instance in the vicinity of remnants. Issues related to performing mining operations with the use of the room and pillar mining system in the vicinity of remnants is important in terms of work safety. Remnants are sites of the concentration of high stress values and may affect rock layers of the rock mass located in t...

Biomass belongs among renewable energy sources and its representation in national energy strategies is increasing due to the limited supplies of fossil fuels. One of the options for substitution of fossil fuels is short rotation cropping systems for woody biomass as a method of reclamation and revitalization of anthropogenic soil profiles during restoration activities in the areas after brown coal mining. The scope of the project "Methodology of sustainable agricultural management in anthropogenic damaged landscap...

The purpose of this expertise is to evaluate by mathematical modeling the stability of the slag and ash deposit Compartment II Emergency Cicani, which will be carried out on the past site of the Cicani Mid-East compartment by elevation with a height of 3,0-3,5 m, up to + 178mdMN. The deposit will be made using the "thick slurry" technology, having as foundation the deposition of slag and ash existing in the Cicani Middle + East (existing) compartment, made by the hydraulic transport technology. The basses of the e...

The Cu-Ag deposit exploited in the Lubin-G?og?w Copper district (LGCD) in Poland is located in the Permian Rotliegend (sandstones) and Zechstein (shale and carbonate rocks) formations. The three main lithological series are not internally homogenous; within them, a total of 16 individual lithological units can be determined. The differentiation between lithological, mineralogical and geometallurgical ore properties is a criterion used to distinguish between main and individual lithologies in the deposit area. A sy...

The subject of the study was to characterize three deposit parameters of Pacific polymetallic nodules (the content and the abundance of nickel and the nodule abundance) using classical statistical methods. The input data points come from 448 sampling points of a bed area of about 48,000 km2 in the Clarion-Clipperton fracture zone (approx. 1,000 km west of the coast of Mexico). The sample points formed a pseudoregular grid with an average distance between them of about 10 km. On the basis of these, the basic statis...

In the era of dynamically changing business environment, planning in an enterprise is a part of decision making process. Therefore, a good prepared action plan is necessary. The rationality of decisions included in the plan depends on the quantity and quality of information available to the decision maker. Enterprises, including coal mines, are a set of interdependent phenomena. For that, we need to create decision support tools, the results of which will be visible in the future. Common tools include methods base...

The basis for safety management is the assumption that safe conditions as well as safe behaviour at work do not arise spontaneously, but must be worked out according to a pre-approved program. It is known that preventive actions have a much greater importance and sense than the removing of a damage resulting from accidents. Therefore, it is necessary to take measures aimed at improving the working conditions, equipment and conduct of employees hired in the mine. The presented article is an attempt at a practical a...

Typomorphic features of placer gold from alluvial deposits of the Bolshaya Kuonamka river basin, draining Eastern framing of the Anabar massif are studied in order to identify association types of primary sources and places, promising for their discovery. Based on identified indicators of gold, it is defined that, ore manifestations of low-sulfide gold-quartz association are the main primary sources of gold-bearing placers. Identification of palladium gold in association with platinoids, as well as its intergrowth...

During the process of conceptual designing of earthmoving or construction boom type machine we have must ensure that it is applicable in practice, meaning stable. Unfortunately, not every time is design of upper structure of such a machine ideal in consideration of position of centre of gravity and that is the reason why are stabilizing outriggers usually attached. This article talks about possibilities of use various schematic drafts of stabilizing outriggers for earthmoving and construction machines on the wheel...

My presentation discusses facts about usage of brickmaking materials necessary for production. I named technological processes for extraction of brickmaking materials reaching to fifties of twentieth century. Their shift in modernization of technological processes in extraction of brickmaking materials and their current state. I concentrated on individual mechanical devices. From first machines serving in help of extraction, transportation and processing which have been entering extraction processes from the begin...

One of the reasons for spontaneous combustion of coal waste dumps is the air intake into the body of a dump. Despite the measures taken to isolate the bases and dump slopes, spontaneous combustion of dumps occur in many countries around the world. That breeds a hypothesis that spontaneous combustion process is facilitated by placement of a dump in the geodynamically active zone of the earth's crust. In geodynamically active zone, due to its high permeability, the interaction of the dumps with environment occurs. P...

The article is devoted to ergatic systems for training skills of handling breathing apparatus (mine self-rescuer) for staff protection in emergency situations. These systems represent hardware-software systems for simulation of physical activity, emergency situations and monitoring the status of a trainee. These tasks are interrelated and must be solved simultaneously in real time to ensure training process. The joint solution of these tasks implies the need to process large amounts of data within short time inter...

For generalized inversion, non L2-norm inversions have been widely used in geophysical inversion to obtain sharp and blocky models. However, problems such as the boundary of anomaly body obtained by inversion is not clear enough and the recovered residual susceptibility value is far less than or greater than the true susceptibility generally exist. In this paper a new 3D magnetic inversion approach based on residual node susceptibility is proposed. The residual node susceptibility model comes from residual block s...

The purpose of this article is to describe the modern methods of making models of quarry using the latest technologies such as laser scanning, land and air photogrammetry using Unmanned Aerial Vehicles (UAV) and their subsequent use in the planning of technological processes in the quarry. The first part of the article is dedicated to the creation of models with a focus on data collection and processing, compatibility of each format, the very creation of the model as well as the possibility of using the created mo...

Meta-siltstones are solid sedimentary rocks containing some clay material. Such geomaterial is taken mainly for the production of cement and garden paths. It can also be found in coal mines between coal beds. Processes of technological extraction of such natural material are always connected with the problems of its physical and mechanical behavior, therefore it is important to evaluate the basic deformation-strength properties. Moreover, if we consider the influence of the scale factor, we will get a more complet...

Coal mining causes undesirable terrain subsidence due to caving in of the overlying rocks into the already excavated space. Subsidence deforms the terrain, damages structures on the surface and water flows, which results in the formation of inaccessible wetlands and swamps, and these areas need to be reclaimed. The problem of large flooded areas as a result of mining activities also concerns an area known as пїЅKozinecпїЅ, which is located between KarvinпїЅ and Doubrava in the Czech Republic. That territory has lo...

The major changes occurred in Romanian mining industry imposed by the transition to the market economy, concentration of extraction to fewer output units in deeper seams, the high gas emission rates and coal rank, other current specific trends requires new methods to produce the optimum design and operation of a safe and economic methane drainage system. Under the circumstances, the paper describes a mathematical model together with a computer-aided optimization strategy to assist the analysis of the differences b...

Testing and certification of explosion-proof electrical equipment required for product conformity assessment are extremely important, taking into account the unexpected hazard of explosion occurrence due to potentially explosive atmospheres generated by mixtures of air-gas/dust. The explosion risk has to be minimized in order to ensure the health and safety of people and for preventing material damages. The new European Directive which regulates the protection to explosion field is the ATEX Directive 2014/34/EU wh...

One of the fundamental problems in coal mining industry is inefficient use of machinery and equipment. It is therefore necessary to take measures to improve the situation. An innovative system to test components of mining machinery control hydraulics presented in the article may support the initiative. This system enables reliable and efficient testing of components of the control hydraulics. This has an essential and practical significance, since hydraulic systems are commonly applied by many industries, in parti...

Changes of damage to the belt core that are not controlled during the exploitation can lead to dangerous accumulation of the defects (strains) in the cross cross-section. It can lead to serious weakness and even rupture of the belt. Early detection of the mic rodamage of the covers and evaluation of the increase speed of the damage allows the user to plan maintenance more precisely. Furthermore, it allows more effective cost management when conveyor belt maintenance is scheduled. In this paper, geometric data o f ...

Degraded post-mining areas have considerable potential for redevelopment. They are usually located in attractive urban areas and have convenient road and rail links to the rest of the city and other places in the region or country. These areas are often equipped with power, water and sewage systems. The redevelopment of these sites could take place in many different directions. They can be used to carry out production, service, commercial, residential and leisure activities. However, the unstabilized legal situati...

The paper begins with the idea that in a large energy enterprise, formed by merging several energy companies with a mining company, the organizational culture is the key to success. The paper underlines the close connection between the organizational culture and the enterprise efficiency. The organizational culture supports the economic and social efficiency, the adaptability in the competitive context and the company which has a strong organizational culture may be saved from the consequences of unfavorable econo...

Rosia Montana deposit is made up of several ore bodies; the natural factors are characteristics of each ore body. The deposit is accompanied by an extensive area of hydrothermal alteration, whose distribution has a complex character. Fast alteration and humidity were one of the factors that have been taken into account in order to achieve quarry. The quarry platform has reached at the level of the upper bottoms in the breccia area, which involves passing to the exploitation of the reserves included in these pillar...

The article describes the chosen Japanese production and maintenance management philosophies, such as Lean Management, kazien and TPM. Japanese approaches to the process of work organizing and work planning, workplace preparing, tasks, duties and responsibilities turn out to be the most effective and the most efficient in the world. The practical application of these philosophies entails achieving the measurable benefits by the companies that use them. The basis of these philosophies is the elimination of all kind...