Browse

Technological developments in 20 and 21 centuries have highered up standards of living and created welfare and more comfortable living conditions for mankind. However, together with the increasing world population, environmental problems have also increased and diversified based on various reasons. Therefore, with the aim of solving the existing air, water and earth pollution problems and taking them under control, laws and regulations have been put into force and announced both internationally and domestically. T...

Drilling rate is one of the main determinants of drilling cost. The performance of any drill bit is affected by the complex interaction of numerous factors. The principal factors that require consideration in predicting drilling rate, particularly for mining application, are the characteristics of the rock and the operating parameters of drilling machine. In this paper, the most important operating parameters of drilling machine were reviewed using many basic studies on drilling rate and dillability since 1956. Th...

A standard imaging method in seismic data processing is the simulation of a zero offset section from seismic reflection data. In traditional imaging methods, e. g. NMO/DMO/stack, an accurate macro velocity model is needed. Common reflection surface (CRS) stack is a new data driven method, introduced in recent years which remove the necessity of making this model and just use the surface velocity to simulate zero offset section (2D) or volume (3D). In this article, we drive the CRS stacking on a synthetic data to o...

The filtering of binary images containing graphic and text information possesses typical peculiarities and uses heuristic processing procedures. At the same time the application of grey level methods for processing of digital images gives a lot of advantages. It is introduced an approach for the processing of binary images that is based on the adaptation of algorithms for grey level images like boundary detection, contour tracing, and line tinning. It is made the comparison of methods for binary filtering and corr...

Building a tunnel is a very expensive construction task, especially when cutting a tunnel in inconvenient geological conditions. The tunnel building is made drastically more expensive by badly executed works on the cutting itself, i.e. the excavation, and it happens when the areas of excavation cross-sections differ from the areas of designed profiles. It is therefore very important to monitor, apart from the direction of tunnel cutting in terms of position and height, also the areas of cross sections of the excav...

One of main concern of policy makers is pollution and hence the improvement of the environmental quality. The implementation of environment policies aims at improving life and product quality in order to replace those obtained by high polluting processes by less polluting ones. Countries having more strict environmental regulations are likely to suffer from a significant increase of their production costs. As a consequence these countries become less competitive on the international market and may lose their marke...

Anaerobic treatment system was used for determination of colour removal under batch conditions. Azo-dye (Reactive Black 5, RB 5) with glucose as a carbon source was used as a synthetic wastewater. The decolourization process follows first order kinetics with respect to RB 5 azo-dye concentration in batch conditions. Decolourization rate constant (k1) value for dye concentration of 150mgL-1 was 0.1751 h-1 in the batch experimental study performed with RB 5. Maximum Reactive Black 5 removal efficiency was obtained a...

The Dalmatian region is a karst region built of Mesozoic limestone and dolomites. In the four Dalmatian counties aggregates and natural stone is quarried at 155 sites and there are 73 abandoned sites. A GIS based model on map-correlation and map-integration processes was used in order to define relationships between spatial layers and combine predictor factors in supporting a hypothesis. The response variable is the set of point locations of current aggregate and natural stone quarries (termed training sites), and...

Fly rock is one of the reluctant phenomenon in blasting operation. Several factors are effective in producing fly rock. As a whole, these factors can be divided into two groups; controllable parameters (blasting pattern) and uncontrollable parameters (geo-mechanical characteristics). One of the most important controllable parameters in blasting operation is blast hole diameter. Proper diameter is the diameter which is optimum from technical and economical point of view. Normally, statistical methods can be used fo...

Naturally occurring arsenic (As) in groundwater of sedimentary aquifer has emerged as a global problem, and issue of major environmental health concern. Most groundwater from the Terai Basin of Nepal is contaminated by excess arsenic. Such groundwater is widely used for drinking and irrigation purpose and makes easy means of direct entrance of arsenic into human body and food chain; and that affects human health adversely. This paper evaluates the state of arsenic contamination in the six Terai districts of Nepal ...

The stability problems in 73 meters height of dolomite wall cause to starting an empirical estimation for early step of slope optimization. In this paper, three rock classification systems (RQD, RMR and SMR) are utilized for assessment of dolomite wall failures in the 6th Golbini Jajarm bauxite mine. The SMR (slope mass rating) geo-mechanics classification system, is adaptation of RMR (rock mass rating) for slopes. In first step, joint study and site investigation carried out for RQD (rock quality designation) and...

A review of the CAD systems used in the investigation planning, possibilities to automate planning and the basic directions related with planning are done. Examples for achieved results when developing software for the specialized investigation activities and when working with the program package “Geodesy” are given.

Within the scope of this study, Kuz-Ram and JKMRC fragmentation estimation models were applied to bench blasting operations and pros and cons of models were determined by comparing estimation results with the real fragmentation results obtained from digital image processing technique. On the other side, bench blast optimization method by means of models and digital image processing technique, is introduced in order to get desired fragmentation result from bench blast.

Alkaline basaltic tuffs, BT, from southern Turkey were characterized and used to obtain cheap sintered glass-ceramic and ceramic materials. The chemical and mineralogical compositions were analyzed by fluourescene spectrometry and X-ray diffraction analyses, respectively. The phase formations were studied by DTA, while the sintering behavior – by differentional dilatometer. The structure of the sintered samples was evaluated by pycnometric techniques and observed by SEM. Due to its high porosity and low crystall...

In this study, natural radioactivity removal methods have been compared for present drinking water supplies (privately owned wells or small water works) which have radioactivity values higher than determined standards (WHO \& EPA standards). There are several methods known to remove radioactivity from water such as aeration to remove “Rn222”, adsorption by granular activated carbon (GAC) to remove “Uranium”, ion exchange methods (IX) to remove “Ra266 and Ra288”, reverse osmosis (RO) to remove “Gross ...

There are two methods fixed and real-time assignment for improving the performance of transportation through truck- shovel system in open pit mines. The real-time assignment (RTA) method is a better manner for optimization process of transportation system in open pit mines, especially in the complex transportation systems. The most significant objective of the RTA method is, introducing a transportation system which cause to increasing production per time and decreasing cost per ton. In this study, a software base...

In current paper the purposes of an environmental assessment are described and the method, through which the “Impacting Factors” and “Environmental Components” are determined, is also outlined. Then, according to the definition, possible scenarios, and matrixes of weighting factors, the algorithm which shows the relation between Impacting Factors and Environmental Components is determined. Furthermore, the derivation of matrixes and the method of environmental assessment are described. In order to compare ...

The Normalized Full Gradient (NFG) method was introduced in the mid of 1960s. This method generally uses for interpretation potential field data in order to detect gravity and magnetic anomalies. The NFG value represents the full gradient of the magnetic anomaly at a point divided by the average of the full gradient at the datum. The closed maxima on a NFG map indicate the occurrence and the horizontal locations of the centers of magnetic anomalies related to iron deposits. By means of this map, we can select bore...

The leaching conditions of galena (PbS) concentrate in nitric acid (HNO3) medium containing hydrogen peroxide (H2O2) were investigated in this study. Effects of stirring speed in the range of 0 to 600 rpm, nitric acid concentration in the range of 0.1 to 2.0 M, hydrogen peroxide concentration in the range of 0.25 to 2.0 M, leaching temperature in the range of 23 to 60В°C, particle size range of -212 +106, -106 +75, -75 +45 $\mu$m on lead dissolution were investigated. According to obtained results, it was determin...

Noise is an important factor affecting human health psychologically due to lack of performance, hearing failures, decreases in heart beats, physiologically due to higher brain liquid pressure and sociologically due to lack of communication. Especially in closed working areas, it has significant negative effects on the performance. Noise control in closed working areas is generally done with boron added cellulosic mixture sprayed on the structure or surfaces with required thicknesses. In this study, noise was gener...

Determination of mechanical parameters of rock materials and using them as an input data-base are important in rock engineering design studies. The standard test procedures to determine mechanical parameters of rocks have been developed and they have been applied for up to 40 years. But these tests require special samples and after preparation, the samples are tested by giving damage to them. The electrical conductivity method has been used to determine porosity, fault or discontinuity in rock mass without giving ...

WATER-MAP is a 2-year project funded under the Community Initiative INTERREG III B ARCHIMED and implemented by nine partners from six countries (Greece, Italy, Malta, Cyprus, Turkey, and Palestinian Authority). The project looks at the topic of integrated groundwater resources management. The aim is to provide scientifically reliable information to the local authorities in order to develop optimal spatial development strategies. Within the framework of the project, vulnerability maps are generated in order to dete...

In this paper a combined (hybrid) model of fix and flexible with its software were presented. In the model, initially the trucks assignment operation using the fix approach was done and in the end of trucks operation cycle in the flexible method, trucks dispatching method was started. Results of fix assignment method implementation in each transportation scheduling period were used in the mentioned software and finally the fitness and most suitable shovel and truck combined system for the real-time assignment was ...

Since 2000 in Bulgaria have been installed and put into operation two DGPS beacons. Preliminary site selection and equipment delivery procedures for a new station of the same type have been started recently. Each of the two existing and one planned stations serve specific activities: marine and inland water way navigation and exploration, land navigation, positioning, targeting, etc. Though built with different purposes and missing a common network concept, these stations provide differential correction coverage o...

This paper presents a study for leaching kinetics of chalcopyrite concentrate in acidic potassium dichromate solution. For this purpose effects of stirring speed in the range of 100-400 rpm, sulphuric acid (H2SO4) concentration in the range of 0.1-0.5 M, potassium dichromate (K2Cr2O7) concentration in the range of 0.02-0.1 M, leaching temperature in the range of 20-90В°C, particle size fractions of 212x106, 106x75, 74x45, 45x38 and minus 38 $\mu$m and solid/liquid ratio in the range of 10-200 g/L on copper dissolu...

The paper presents the basic terms in the field of distance and e-learning. After presenting and defining basics of the mentioned field, we shortly describe our practical experience with providing bachelor course using distance learning supported by e-learning technologies. Keywords: education, e-learning, distance learning, ICT, LMS.

Each employee has a unique potential, which need to be stimulated due to be most productive. Education is an important factor for this stimulation. Only well educated employees are real competitive advantage for the company. In the year 2006 we have realized research study of educational needs of tourism organization in KoС™ice region. We tried to identify factors, which are necessary for the real development of tourism. In the study we have found areas, in which human resources needs to be strengthened. The follo...

This paper describes removal of Pb(II) ions from aqueous solutions using NaOH modified pine barks (Pinus nigra). Chemical modification and its enhancement effect on adsorption capacity for heavy metal treatment process have been investigated in this article. Changes of the surface properties after modification were examined by the FT-IR analysis. Maximum adsorption capacity was 49 mg/g at pH 8 and during about 180 min contact time (for 35 mg/L initial concentration with 2.5 g/L solid-to-liquid ratio) These modific...

In the course of years in the engineering practice are formed mathematical procedures which are marked as “engineering calculations”. We will characterize the engineering calculations with the following specific features: • the engineering calculations are pointedly pragmatic; • the engineering calculations are based on working formulas; • the results are approximate; • the engineering calculations are developed by experts and should be applied by experts.

The importance of a high literacy consciousness in the development of societies is a known fact. Scientific literacy is the fundamental criterion to catch the era in social, scientific and technological fields. Science, Technology and Society (STS) literacy level and the sensitivity of the natural environment protection is crucial in the economic and technologic development of countries. For this reason, the developed countries applied STS literacy to all layers of the societies. The developing countries have to p...

To implement large-scale multiagent systems (MAS) in the paper is proposed a new system design methodology towards environment-centered design. The interaction of blocks that compound the structure of multiagent system for environment processes is described. These links consist in system simulation, where agents and human-controlled units coexist in virtual space to jointly perform simulations and augmented experiment. As an application of environment-centered design, environment embedded agents for a large-scale ...

Peak particle velocity is the most important criterion for analyzing dangers resulted from ground vibration. According to the investigations, this parameter can independently indicate the possible damage and is proportional to it. Up to now, investigators have proposed many different formulas to calculate this parameter, but none of them are applicable for all areas and based upon regional conditions such as geological, technical, geotechnical, rock mechanical and so on, only one of these equations can be adopted....

The problem of recycling worn car tires is ecologically and economically important. Worn-off tires are a source of long-term environmental pollution. Tires subject to no biological decomposition, they are inflammable and being ignited 1 ton of tires releases in the atmosphere 270 kg of carbon black and 45 kg of toxic gases. At the same time, they contain valuable raw materials such as rubber resin and metal. The most optimum of all known tire-recycling methods is low-temperature pyrolysis that provides complete re...

The economical investigation is one of the most important stages in the mine planning, as it can be a useful guide in the mine exploitation. The iron ore district of Gol-E-Gohar (GEG) is located about 60 km south-west of the city of Sirjan, in the Kerman Province of the Islamic Republic of Iran. Six anomalies are known and for about 10 years, Area 1 ore is mined and processed for the recovery of a dry as well as a wet concentrate. The proven reserves of Area 1 were about 265 million tonnes, whereas near to 100 mil...

Fluid inclusion application in epithermal gold exploration is based on the fluid inclusion characteristic and its relation to the mineralization. These characteristics include the type of fluid inclusions and different fluctuations in their micro thermometry measurement and chemical composition. In this regard, based on the micro thermometry measurements, the fluid inclusions in epithermal gold systems have the homogenization temperatures between 100-300 ВєC and the salinity of 5\% NaCl equiv. in average. Within t...

Because of the approved understanding of the ecological system of our planet also Earth Sciences will be asked for solutions of global problems. Various data, knowledge and instruments should be used to give precise answers to provide confidence in the scientific, politic and public community. In addition to this ecological issue Earth Sciences will provide an important impact on European economy to follow the “Lisbon Strategy” to foster the European Economy with a strengthened and excellent European Research ...

Multivariate statistics analysis is one of the base stages in geochemical data processing. In this branch of mathematics, “Hierarchical Clustering Analysis” applied to identify the relations between the variables such as elements and samples. Hence, different types of mineralization would define. However, any missing or errors in entrance the data make a wrong or not clear result. Sometimes misinformation or data errors appear because of analytical errors, missing some information, or problems in sam pling or ...

Water is the key Element in social and economic development of the country, which is becoming a scares resource due to over-increasing demands of the growing population, Agriculture, Hydropower and Industrial Users. Site selection of industries in the river side, usually affect on the monitoring program. Thus the monitoring of the rivers for the effective management and planning in the water section has become most predominant aspect and need to pay attention to the best program for industries location. Haraz is a...

Gold mining is attracting increasing attention in many countries of the world, although it has a major impact on the environment. Large quantities of hazardous chemicals such as mercury or sodium cyanide are consumed to recover gold from its ores. Therefore, this activity should be carefully regulated by means of global directives based on an up-to-date knowledge of ecotoxicity principles and modern environmental standards. In light of recent developments in world gold mining, Turkiye has caught the attention of f...

Gold mining is attracting increasing attention in many countries of the world, although it has a major impact on the environment. Large quantities of hazardous chemicals such as mercury or sodium cyanide are consumed to recover gold from its ores. Therefore, this activity should be carefully regulated by means of global directives based on an up-to-date knowledge of ecotoxicity principles and modern environmental standards. In light of recent developments in world gold mining, T\"urkiye has caught the attention of...

The present work discusses the synthesize of sintered granite–like glass-ceramics obtained by vitrification of hazardous industrial wastes. The chemical resistance of parent wastes and glasses were classified by the toxic characteristics leaching procedure (TCLP), whereas the crystallization behaviour was evaluated by DTA and XRD. The thermal and mechanical properties of final glass-ceramics were also measured and discussed. The obtained glass-ceramics have attractive appearance, elevate chemical durability and ...

The technical specifications defined from instrumentation owners of suitable for remote access expensive equipment in Earth Sciences domain are presented. The database containing all mentioned above structured information is created and used as analytical tool in this investigation. The user community requirements in several different domains for application of remote access are evaluated and analysed. This work is one of the main parts of RINGrid project (Remote Instrumentation in Next-generation Grids) under the...

Heavy metal pollution is very important problem in waste water pollution around industrial area. Cupper has been used in many industries with civilisation period and a lot of water sources were contaminated by dissolved component of cupper metal. It has incredible effect on the micro-organisms and also other living organisms in water environment. For this reason, copper content of industrial wastewater must be decreased to the limits given in the international regulations. There are many methods may be used for he...

The analysis of the practical applications of the findings of the preliminary tests for the effectiveness of the disinfection treatments with high-frequency cold plasma conducted on samples collected from patrimony items and reference materials of organic nature has shown that the microbiological investigations confirm the biocide action of the HF plasma in fighting bacteria (after 45 minutes in the samples of icon wood and natural silk, 60 minutes in the cotton samples, 90 minutes in the archaeological wood and l...

This report describes the morphogenesis of the cyathium in two subspecies of Euphorbia myrsinites L. occurring in the flora of Romania related to the vascular transition. Our histo-anatomical researches established the origin of the vascular system in the different parts of the cyathium (involucre, nectary glands, monostaminate male flowers and female flower).

Our investigations have focused on observations concerning the horse-chesnut’s (Aesculus hippocastanum L.) leaves in various phenophases, the state of the leaf surfaces and histo-anatomical changes of the leaves under the influence of the atmosphere pollutants (sulphur dioxide, chlorine, ammoniac, lime or cement powders). The histo-anatomical changes induced by the gaseous and solid atmosphere pollutants on the lamina have been observed in protecting tissues, assimilator tissues (the palisade and the spongy tiss...

The long-going petroleum exploitation in the Section Cocu determined the increase of chloride concentrations in groundwater. The aquifer system in this area comprises four aquifers, with different extensions, separated by semipervious units. The third and the fourth aquifer are more extended. The third aquifer is in direct relationship with potential pollution sources, such as oil wells and oil pipelines and it is drained by the River Cotmeana. Several monitoring wells were drilled for the purpose of this study, p...

In this paper it has been assessed the current situation of the old vestige material deposits created during the Pb-Zn concentrate production process. Flotations of Stant\"erg, Kishnica and Albanik, have exposed those vestige materials in the open surface field and are treated as main source of the air contamination in Mitrovica and surroundings, Kizhnica and Albanik. The results which make powerful the opinion that application of the hydro filling method of exploitation in all Trepca mines are shown as well, sinc...

In this paper some specific problems concerning the database and information quality are presented analyzed. There are emphasized some approaches presented in the literature and some “classical” mistakes encountered in practice.

This paper has been accomplished in the framework of Diminish Project (LIFE03 ENV/ RO/000539) within the Life Environment Program. In accord with the Water Framework Directive the nutrient management is a decisive factor for increase the water quality. In this respect the Diminish on-line system, based on GIS database and modeling approach and using Open-GIS technology, allows diminishing uncertainties related to basin management. The Bistrita River (283 km length, 7039 km2) had proven to be specifically sensitive...