SWS Academic Research eLibraryEarth & Planetary Sciences

Browse

Search Results

Now showing 1951 - 2000 of 2474

Year: 2017clear all
Showing 1951-2000 of 2474 records
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

COREGISTRATION OF SAR IMAGES USING DUAL-POLARIMETRIC INFORMATION

(STEF92 Technology, 2017-06-20, Porzycka-Strzelczyk, S., Strzelczyk, J., Franczyk, A., H.Malik)

Show more

In this paper a new method of dual-polarimetric SAR image coregistration procedures is proposed. Both cases - coarse and fine coregistration are considered. In the proposed approaches the widely used coherence parameter is not applied. Instead, the dual-polarimetric signatures are exploited. They allow to identify location of strong point scatterers within the SAR images. These scatterers can be further used in coregistration procedure as reference points. The developed algorithms described in this work were teste...

Geodesy and Mine Surveying2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

INTEGRATING BROWNFIELD SITES INTO CITY REDEVELOPMENT STRATEGIES

(STEF92 Technology, 2017-06-20, MOSCOVICI, A.M., BANESCU, O.A., VADUVA, R.)

Show more

As a result of increasing of urban population cities are currently facing a growing demand for space for residential, commercial, industrial or leisure use. Brownfield sites are very common in Romania, especially in big cities like Timisoara and in former industrial cities. Reusing brownfields is a way forward for the Romanian cities. There are many inspiring examples of brownfields regeneration in the EU, but every site is unique (including regulations, landowners, market attractiveness etc.) and all these partic...

Green Design and Sustainable Architecture2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

AN ATTEMPT TO IDENTIFY SUBGLACIAL FAULT ZONES ON THE BASIS OF GPR SOUNDINGS IN GLACIERS OF SOUTHERN SPITSBERGEN - A CASE STUDY

(STEF92 Technology, 2017-06-20, Michalowicz, P., Grabiec, M.)

Show more

According to the geological maps of southern Spitsbergen, faults commonly run parallel to the glacier valleys' axis. General faults orientation is N-S and NNW-SSE. This may suggest, that the origin of glacier valleys is related to tectonics due to development of structural landforms on individual faults. The network of ground penetrating radar (GPR) profiles based on measurements on three glaciers of southern Spitsbergen: Recherchebreen, Hansbreen and Werenskioldbreen, was processed and interpreted for the presenc...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

PHOTOGRAMMETRIC AND TOTAL STATION-S MEASUREMENT OF COLUMN MODEL

(STEF92 Technology, 2017-06-20, Widerski, T., Daliga, K.)

Show more

Modelling studies continue to play an important role. One of such study is stress determination in the reinforcement bars of reinforced columns and determine column's axis deformation. The article presents measurements results of control points located on the model of reinforced concrete column. The column was compressed in few series till it's destruction. In this studies, photogrammetric method and total station measurements were used. The main goal was to use photo points located around column with known coordi...

Geodesy and Mine Surveying2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

AN ANALYSIS OF ENERGY AND FUNCTIONAL BEHAVIOR OF HYDROSTATIC TRANSMISSIONS

(STEF92 Technology, 2017-06-20, POPESCU, T. C., POPESCU, A. M. C., Marinescu, A., POPESCU, A. I.)

Show more

Hydrostatic transmissions create compliance between rigid functional parameters of a power-machine, e.g. an electric motor, and flexible functional parameters of the work machine, e.g. a crane hoist. Hydrostatic transmissions equip fixed or mobile machinery and guidance systems for: aviation, artillery, wind turbines, hydraulic turbine blades, etc. Any hydrostatic transmission includes at least two positive displacement machines: a pump, called transmission ?primary? and a motor, called transmission ?secondary?. H...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

LAKE SHORELINE CHANGES OF THE SELECTED LAKES IN HIGH TATRAS (1949-2015).

(STEF92 Technology, 2017-06-20, Tomko-Kralo, D., Kapusta, J., Bugar, G., Sedlak, A., Hresko, J.)

Show more

Changes of the lake shoreline of glacial lakes in Tatras are significant indicator of postglacial evolution of their lake basins. In this research we evaluate the lake shoreline changes of the tatras lakes on the historical and actual analysis of the orthophoto maps from period 1949-2015. We very precisely evaluated the dynamics of the lake shoreline with application of retrospective analysis of remote sensing materials from that period. In some cases it led to quite marked shrinkage of open water lake areas as th...

Photogrammetry and Remote Sensing2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

PROBABILISTIC CRITERIA FOR RISK ASSESSMENT OF TORNADO EFFECTS ON HAZARDOUS PRODUCTION FACILITIES

(STEF92 Technology, 2017-06-20, Bryukhan, Fedor)

Show more

In connection with the significant destruction capability of tornado, the possibility of tornado passing through the areas comprising higher criticality rating facilities, such as nuclear power plants (NPP), is considered during the design and engineering (D&E) phase for such facilities. Corresponding probabilistic safety criterion in introduced into the decision-making basis concerning the consideration of tornado's impact onto the hazardous production facilities and destruction loads computation during the D&E p...

Nuclear Technologies2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

INDOOR AIR QUALITY ANALYSIS OF RESIDENTIAL BUILDINGS

(STEF92 Technology, 2017-06-20, Kraus, M.l, Senitkova, I. J.)

Show more

The contribution deals with the indoor air quality (IAQ) in residential prefabricated panel houses, which represent a significant proportion of the housing stock in the Czech Republic. Ensuring the health and comfort of users is a phenomenon of present time in accordance with the principles of sustainable development. Almost two thirds of building occupants suffer from the symptoms of Sick Building Syndrome (SBS). Concentration of pollutants in indoor environments increases due to increasing of airtightness of the...

Green Design and Sustainable Architecture2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

NANOSTRUCTURING AND HETEROGENEOUS STRENGTHENING OF TOOL MATERIALS FROM POWDER HIGH-SPEED STEEL

(STEF92 Technology, 2017-06-20, Altukhov, A.Y., Kirichek, A.V., Ageev, E.V., Soloviev, D.L.)

Show more

The results of microstructure study, X-ray microanalysis, microhardness, porosity of sintered samples from a powder high-speed steel before and after hardening by the wave intensive plastic deformation are presented. It has been established that the basic elements in the composition of sintered samples from tungsten powders are C, O, Mo, Ca, V, Cr, Fe, W. Based on the analysis of the sintered samples microstructure, it was determined that the there is a uniform distribution of solid carbide in the base material vo...

Micro and Nano Technologies2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

RARE EARTH ELEMENTS IN THE ROCK SEQUENCE FROM LOWER TO MIDDLE DEVONIAN IN THE HOLY CROSS MOUNTAINS, POLAND

(STEF92 Technology, 2017-06-20, Musial, A., Sermet, E., Niec, M.)

Show more

The Holy Cross Mountains is Paleozoic massif, 120 km long and 30 km wide is situated in the central part of Poland. It is built of Cambrian to Permian rock sequences and surrounded by Triassic to Cretaceous rocks. All over the massif Quaternary sediments form spotted cover. Paleozoic rocks are folded and dissected by transversal and longitudinal faults. The deposits, that occur between the siliciclastic Lower Devonian and Carbonate Middle Devonian sediments are interesting due to numerous ore mineralization sites....

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

3D PRINTING WITH DEFORMABLE MATERIALS

(STEF92 Technology, 2017-06-20, Amza, C. G., Zapciu, A., Popescu, D.)

Show more

This paper presents an original approach on developing and testing an extruder for paste-like materials for conventional 3D printers based on Fused Deposition Modeling (FDM) technology. The main advantage of such technology is that it allows the final product to be modified / altered after fabrication i.e. either to correct printing irregularities or simply give it another design form. The material is fed into the extrusion nozzle via a plastic cylinder driven by an electric actuator. Various extruding nozzles wer...

Informatics2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

STUDY REGARDING THE CONVERGENCE OF THE STRUCTURAL MODELS IN COMPUTER-AIDED DESIGN

(STEF92 Technology, 2017-06-20, Muraru, Vergil)

Show more

This paper presents a study of the structural models convergence, rezulted from CAD (Computer Aided Design ), based on method of estimation. The study of the structural models convergence presented a method based on the convergence, in the sense of mathematical analysis, adapted to finite strings. The convergence estimators are status sizes that characterize the response of the structural model to the given load. As convergence estimators can be used sizes that characterize the response of the structure, like foll...

Informatics2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Ecology, Economics, Education and Legislation
Publication

INVESTIGATION ON HEAVY METAL CONTAMINATIONS OF POTATO TUBERS GROWN IN DIFFERENT PRODUCTION SITES IN VUSHTRRI, KOSOVO

(STEF92 Technology, 2017-06-20, Feka, F., Musa, F., Musa, A., Behrami, S.)

Show more

Potatoes take up metals by absorbing them from contaminated soils, as well as from deposits on different parts of the vegetables exposed to the air from polluted environments. The content of Zn, Cu, Pb and Cd in potato tubers grown in different production sites of Vushtri, Kosovo was determined using atomic absorption spectrometry (AAS). Experimental work was performed at the chemical laboratory of the Phytosanitary Corporation Sara & Meti, Kosovo, which is accredited according to ISO 17025. The results of this st...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

NATURAL NANOTECHNOLOGIES IN GOLD MINING

(STEF92 Technology, 2017-06-20, Osovetsky, Boris)

Show more

The processes of nanogold deposition and concentration in the environment, which have been occurring with enlargement of metal grain size, may be considered as the natural nanotechnologies. The mechanisms of nanogold concentrations in geological objects are established and described on the example of many deposits in Russia (the Urals, Siberia) and abroad (Canada). They produce different morphological and chemical aggregations of gold nanoparticles. Among them variable growths on the placer metal surface, globular...

Micro and Nano Technologies2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Ecology, Economics, Education and Legislation
Publication

ASSESSMENT OF THE MAN-MADE HAZARDS AT REGIONAL SCALE. THE CASE OF BUHAREST-ILFOV DEVELOPMENT REGION

(STEF92 Technology, 2017-06-20, Grigorescu, Ines)

Show more

Bucharest-Ilfov Development Region is located in the central part of the Romanian Plain and includes the Bucharest municipality (the capital of Romania) and Ilfov County. Man-made hazards can involve casualties and environmental pollution, also being recognized for the generated social, environmental and economic impacts. The current study entails the regional assessment of multiple man-made hazards (sometimes referred to as technological hazards) in one of the most developed Development Regions in Romania, i.e. B...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

ASPECTS REGARDING THE ASSESSMENT OF TECHNICAL INSTALLATIONS OPERATING IN ENVIRONMENTS WITH HAZARD OF EXPLOSIVE ATMOSPHERES, IN ROMANIA

(STEF92 Technology, 2017-06-20, Moldovan, L., BURIAN, S., Gaman, G. A., Paraian, M., Magyari, M.)

Show more

In installations in which flammable substances are processed, transferred or stored, explosive atmospheres generated by flammable gasses, vapors and mists or combustible dusts can occur. The assessment of these installations and equipment within is very important in order to verify the implementation of measures that lead to minimizing the risk of ignition of explosive atmospheres and occurrence of an explosion. In Romania, technical installations that operate in environments with hazard of explosive atmospheres m...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

AERONAUTICAL SURVEYS OF OLSZTYN AIRFIELD AND SURROUNDINGS IN ORDER TO DEVELOP RNAV GNSS FLIGHT PROCEDURE

(STEF92 Technology, 2017-06-20, Ciecko, A., Grunwald, G., Templin, T., Dobek, M.)

Show more

In order to design the RNAV (area navigation) precision approach (PA) or nonprecision approach (NPA) there is a need to collect vital information on runway, aerodrome obstacles, and other important factors that support approach and landing procedure. Therefore, the development of RNAV flight procedures requires the acquisition of relevant field data on objects that affect flight safety during its decisive stages. Designing of flight procedures, updating aerodrome maps and aerodrome obstacle maps, creating obstacle...

Geodesy and Mine Surveying2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

THE STUDY OF POLYMER COMPOSITES BASED ON POLYVINYLCHLORIDE FILM AND BIOPOLYMER FILLER

(STEF92 Technology, 2017-06-20, Uspenskaya, Kseniia)

Show more

Polyvinyl chloride ? a synthetic polymer that has received widespread application as packaging material. Like any plastic, PVC does not decompose in the environment and usually recycled by burning or accumulating in landfills. Recycling of packaging materials is time-consuming and energy-consuming process, so because of that, it is necessary to explore ways of minimising the harm caused by use of plastic packaging on the environment: for example, degradation of the polymer in a natural way. One of possible options...

Recycling2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

THE MECHANIZATION OF MANUAL ROTATION OF SHUT-OFF VALVE ELECTRICAL DRIVE FLYWHEEL IN CONDITIONS OF ELECTRIC POWER SUPPLY INTERRUPTION

(STEF92 Technology, 2017-06-20, Brusnik, O., Paponin, I., Miller, O., Koloskov, R., Shavlov, E.)

Show more

Shut-off valve is an important element concerning operation of the main oil pipeline. It has a major role in technical process and elimination of emergency situations. There is a necessity to raise the level of work efficiency of shut-off valve with the purpose of increasing pipeline serviceability. As a rule, electrical drive is used for operation of shut-off valve in oil transportation. According to this we have an urgent problem of electrical drive breakage caused by electric power supply interruption. It is a ...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Ecology, Economics, Education and Legislation
Publication

ENGINE OIL SPILLS AND THEIR SUBSEQUENT REMOVAL DURING LOGGING

(STEF92 Technology, 2017-06-20, Sulekova, Miroslav)

Show more

The environment and its protection are among the most followed topics of today. Logging using forest machines is closely associated with the hazard of service fluids spills and their negative impact on the forest ecosystem. Engine oils represent the highest share of all service fluids used in forest machines. In the present study we tested engine oil fouled during regular operation of the forest machine. Synthetic, as well as natural sorbents can be used for a quick and effective removal of engine oil spills. Proc...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

USE OF GEOTHERMAL ENERGY IN THE ELECTRICITY GENERATION PROCESS.

(STEF92 Technology, 2017-06-20, Prill, K., Szczepanek, M.)

Show more

According to the literature [9,15] geothermal energy means a part of the Earth's energy resources accumulated in water, water steam and dry hot rocks. It is classified to a group of renewable resources, virtually inexhaustible due to its transfer from the Earth?s inside by conduction and convection. M. Kaczmarczyk [6] describes geothermal energy as a primary energy originated in the process of the Earth formation and as the energy generated by the radioactive decay. It has been evaluated that the global geothermal...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

GEODETIC MEASUREMENTS OF MODERN MOVEMENTS OF THE EARTH SURFACE ON ALMATY GEODYNAMIC POLYGON

(STEF92 Technology, 2017-06-20, Omirzhanova, Zh., Kartbayeva, K., Aimenov, A., Jazbayev, A.)

Show more

Surveying methods are precursors of strong earthquakes and play a big role to study current movements of the earth's surface. For this reason, the prognostic geodynamic polygons have been set. Almaty geodynamic polygon (GDP) was created in the years between 1967 and 1971. The area is located in the zone of 5 deep faults and it refers to Almaty seismic areas with magnitude of 9. Since 1971 in Almaty geodynamic polygon have been hold about 52 cycles of high-precision leveling classes I and II. Leveling network consi...

Geodesy and Mine Surveying2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Water Resources. Forest, Marine and Ocean Ecosystems
Publication

ASSESSMENT OF ORGANIC MATTER TEMPORAL VARIABILITY IN URBAN LAKES

(STEF92 Technology, 2017-06-20, Popa, C.L., Carstea, E.M., G.Vanau, Moldoveanu, M., Florescu, L.)

Show more

Cities have a significant contribution to the contamination of urban lakes by input with surface runoff, illegal wastewaters discharges, sewage discharges, which lead to increased eutrophication and reduce the ecological health status. Complex temporal monitoring is needed to understand the changes in water quality, including dissolved organic matter. This study presents the first temporal evaluation of dissolved organic matter from urban lakes, using fluorescence spectroscopy. Samples were collected from urban la...

Hydrology and Water Resources2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

ECOLOGICAL ISSUES IN LATVIAN JEWELRY DESIGN

(STEF92 Technology, 2017-06-20, Rudzite, I., Kukle, S.)

Show more

In the framework of this paper, Latvian jewelry, which is made in the past twelve years, is studied by the field research method. The materials used and technologies applied in the making of jewelry were the subject of the research. Besides the specific examples of jewelry, also their authors, which have furthered use of advanced and favorable for environmental methods in the making of jewelry. Research data are obtained based on database developed by the author, which can be used in the Internet, where 804 photos...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Ecology, Economics, Education and Legislation
Publication

REGIONAL RISK RANKING FOR INTEGRATED LAND-SEA RESOURCE MANAGEMENT

(STEF92 Technology, 2017-06-20, Stevens, R.L., Ihrfors, J., Schulz, M.)

Show more

Models for resource and environmental management should be as specific as possible, but complex, regional environments are highly variable and not readily compared, as would be desired for decision support. This paper presents selected tools to improve the transparency and quantitative character of modelling procedures and databases are presented. These methods are largely related to existing procedures for regional relative risk ranking, but also include system structural analysis and risk classification. Several...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Water Resources. Forest, Marine and Ocean Ecosystems
Publication

THE STUDY OF URBAN SOIL QUALITY IN MAJOR CITIES IN ROMANIA. CASE STUDIES

(STEF92 Technology, 2017-06-20, Stanescu, B., Stanescu, E., Kim, L., Carol, L., Scradeanu, M.)

Show more

This study reports the assessment of the pollution to urban soil pollution in few major cities of Romania. In the past few years, in all over Romania an increasing trend could be noticed related to the scientific interest for soil contamination due to anthropogenic activities. Nevertheless, a research aiming to assess a quality screening report related to the presence of contaminants in top soils of urban areas due has never been conducted and the public society is deprived of such information in all cities. The a...

Soils2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

OPTIMIZATION OF FISH PASSES IN ORDER TO IMPROVE LONGITUDINAL CONECTIVITY OF RIVERS FOR SMALL HYDROELECTRIC POWER PLANTS

(STEF92 Technology, 2017-06-20, Ilinca, C. D., Piraianu, V. F., Anghel, C.)

Show more

Renewable energy is playing an important role in the development of any modern country. Numerous renewable energy sources are now harvested on a large scale with the main purpose to reduce the greenhouse gas emissions and diminish the use of fossil fuels. European Union member states agreed to achieve important quotas of renewable energy in their consumption until 2020 in energy and in transportation. Romania has the legislation aligned with the EU directives, therefore the government has issued specific legislati...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

SIMULATION STUDY OF MIXING PROCESS IN OIL TANK

(STEF92 Technology, 2017-06-20, Butov, V.)

Show more

The article presents the results of research on basic parameters of screw-type device designed to lift off, mix, and re-suspend sediments which build up on the bottom of the oil tank. When crude oil is stored in tanks, invariably solid particles and heavy paraffin sediments are deposited. To prevent any sediment from building up on the bottom of the storage tank and to ensure all oil requirements are met, screw-type devices or propellers which are installed at the first horizontal ring of a tank are basically used...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

EQUIPMENT AND TECHNOLOGIES FOR OBTAINING BIOGAS AND BIOCHAR FROM BIOMASS

(STEF92 Technology, 2017-06-20, Matache, Gabriela)

Show more

This article presents the results, obtained from testing an equipment used to obtain biogas and biochar from biomass, developed and manufactured based on a patent developed on a research and development project by the IHP staff. A modern way in order to produce ecological and cheap thermal energy is to utilize biomass through micro-gasification process called TLUD (Top-Lit UpDraft) with high conversion efficiencies and emissions of CO and low PM2,5. A new way for producing energy from biomass is the CHAB concept (...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

ACTIVE SLUDGE AND STRAINS ISOLATED FROM IT AS BIOAGENTS IN BIOFUEL CELLS

(STEF92 Technology, 2017-06-20, Stom, D.I.)

Show more

The technology of microbial fuel cells (MFC) makes it possible to obtain electricity by eliminating and utilizing wastewater components [7]. The promising biological agents in the MFC are microbial associations. The presence of strains of different species of microorganisms allows consortia to consume a much wider range of compounds. Multicomponent makes them more resistant to negative environmental influences. An example of such associations is the sludge of treatment facilities. As part of most wastewater enteri...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

CHARACTERIZATION OF NANOPOROUS ALUMINUM OXIDE LAYERS OBTAINED BY CONTROLLED ANODIC OXIDATION

(STEF92 Technology, 2017-06-20, Dumitrascu, V.M., BENEA, L., Danaila, E.)

Show more

The properties of aluminum and its alloy make them to be the first choice as manufacturing materials for different equipments and accessories. The light weight, high strength and improved corrosion resistance recommend aluminum and its alloy to be used specially in transportation and construction industries. The native aluminum oxide film formed after exposure in air presents voids and cracks and the exposure aluminum parts to corrosive environments which lead to the degradation and reducing their lifetime. In ord...

Micro and Nano Technologies2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

COMPARISON OF PUNCTURE RESISTANCE TEST RESULTS FOR DIFFERENT CONVEYOR BELT DESIGNS

(STEF92 Technology, 2017-06-20, Bajda, Miroslaw)

Show more

A conveyor belt in regular operation is negatively influenced by a number of factors. This negative influence is the result of coming in direct contact with the transported material, which frequently causes serious damage and reduces belt lifetime. The scale and type of this damage depends on many factors, such as a belt?s physical and mechanical properties and its design. The properties of the transported material and the design of the feed point are also of considerable importance [4]. When the damage is caused ...

Exploration and Mining2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Water Resources. Forest, Marine and Ocean Ecosystems
Publication

THE STUDY OF WATER POLLUTION OF THE LOWER VISTULA RIVER BY PLASTIC PARTICLES

(STEF92 Technology, 2017-06-20, Zima, P., Wielgat, P., Cysewski, A.)

Show more

Since the beginning of widespread use of plastic its consumption and production has been constantly increasing. As a result of human activity part of waste ends up in our environment and is deposited in each of the elements of the biosphere. These impurities can be in the form of large elements, small particles fragmented to macroscopic level (pellets, facial scrub grains) and the microparticles visible under a microscope. Particularly harmful for the environment are microplastic particles, which can be deposited ...

Hydrology and Water Resources2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

IMPROVING LOW GRADE IRON ORE BY USING GRAVITY SEPARATION, MAGNETIC SEPARATION AND REVERSE FLOTATION

(STEF92 Technology, 2017-06-20, Makhatha, M E., Shimange, S. A.)

Show more

The effectiveness of using different beneficiation techniques of low-grade iron ore deposits of Assen iron ore mine in Thabazimbi, South Africa has been investigated. The sample received was confirmed to be low grade haematitic iron ore containing (39.18% Fe and 40.29% Si) both lumps and fines. The most abundant gangue present was silica. The different beneficiation methods such as shaking table, drum magnetic separation and reverse flotation were compared on the basis of which one yields a better grade that can b...

Mineral Processing2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

MODELING AND PRECISION STUDY WITH PHOTOGRAMMETRY METHOD OF THE "INCE MINARET" MUSEUM

(STEF92 Technology, 2017-06-20, Ulvi, A., Yakar, M., Alyilmaz, C., Alyilmaz, S.)

Show more

Historical buildings require advanced measurement tools and techniques to be documented in detail and precisely because of their different natural characteristics, different dimensions, and complex architectural constructions. In this study, precise measurements were made with TotalStation, and photographs of historical works were taken from different angles. The obtained raw data were evaluated in a computer environment and a 3D model was obtained. It has been observed that the use of this system, which has start...

Photogrammetry and Remote Sensing2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Ecology, Economics, Education and Legislation
Publication

SURFACE LASER TREATMENT AS AN INNOVATIVE AND ECOLOGICAL TECHNOLOGY FOR ADHESIVE BONDING

(STEF92 Technology, 2017-06-20, Ciecinska, B., Sobotova, L., Gagala, I.)

Show more

In the paper there is the analysis of the possibility of the replacement of onerous methods of surface treatment before adhesive bonding. In ecology approach adhesive bonding is not preferred techniques of joying parts. The joints are no separable, but nonetheless have wide range of usage. The adhesive bonding has many assets, like low mass of the joining elements (less material), possibility of joint of different materials, lack of rivets or screws (less weight). But typical preparatory operations in adhesive bon...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

USE OF GEOMATIC METHODS FOR THE FINDING AND DOCUMENTATION OF HISTORICAL ARTILLERY REDOUBTS

(STEF92 Technology, 2017-06-20, Housarova, E., Sedina, J., Pavelka, K.)

Show more

There are a lot of traces of wars or military activities throughout the Czech Republic. You can find fortifications from Roman times to the Cold War. In 2009, a big project started in the Czech Republic ? aerial laser scanning of the whole national territory. It was finished in 2013; since this year there has been a possibility to use very precise digital terrain models (DTM), a new face of the landscape mainly in forested areas, derived from aerial laser scanners and INS instruments. For archaeology, the use of D...

Photogrammetry and Remote Sensing2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

SEISMIC ANALYSIS OF TUNNEL LOCATED NEAR STRAIGHT INTERFACE OF TWO DIFFERENT ROCKS

(STEF92 Technology, 2017-06-20, Deev, P.V., Tormysheva, O.A., Petruhin, M.A.)

Show more

Interfaces of rocks with different mechanical properties influence on seismic stress field appearing in rock mass during the earthquake. This influence may increase seismic load applied to underground objects located near the interface, so it should be taking into account in seismic analysis of the structures. For this aim the problem of elasticity theory about stress state of the ring supporting an opening in the half-plane, which is united with a half-plane of another material is considered. Lengths of seismic w...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Informatics, Geoinformatics and Remote Sensing
Publication

THE SOFTWARE COMPLEX FOR COMPUTER SIMULATING THE OBSERVATION OF STARS FROM THE LUNAR SURFACE AND CALCULATING THEIR SELENOGRAPHICAL COORDINATES

(STEF92 Technology, 2017-06-20, Petrova, Natalia)

Show more

Appointment of the software system is the solving the direct and inverse problem of the lunar physical libration. The direct problem is to calculate the selenographic coordinates of stars falling within the field of view of the telescope mounted on one of the lunar poles. The analytic theory of the physical libration of the Moon of Petrova N. [1] provides the base for the solution of the problem. The inverse problem is to determine the parameters of lunar physical libration based on the simulated "observable" sele...

Informatics2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

ZEOLITIC MINERALIZATION OF PERMIAN CLASTIC RESERVOIRS OF THE ASHALCHINSKY BITUMINOUS FIELD

(STEF92 Technology, 2017-06-20, KOROLEV, Eduard)

Show more

The Ashalchinsky bituminous field is located in the southeast of Tatarstan Republic, in south-east part (Volga-Ural region) of Russian platform. The Ufimian reservoir sandstones from above present productive layers blocked by caprocks of Kazanian claystones. Bituminous sandwich of greywacke, fine-grained, loose aggregate, cemented with bitumen. The study of sandstones by SEM analysis showed a high content of analcime - a mineral group of zeolites. Analcim forms crusts consisting of irregular crystal intergrowths. ...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Water Resources. Forest, Marine and Ocean Ecosystems
Publication

THE POSSIBILITY OF USING SPECTROGRAPHIC DATA TO ASSESS SOILS FERTILITY

(STEF92 Technology, 2017-06-20, Sirotkin, V., Vasyukov, S., Usmanov, B.)

Show more

In order to determine the dependencies between the chemical indices of the soils of the automorphic series and the results of spectrographic analysis, the field survey with HandHeld2 spectrograph was conducted at cleaned surfaces of the soil sections at soil sampling site. Data for zonal soils of Chuvash Republic (podzolic chernozem, dark grey forest soils, typical grey forest soils and light grey forest soils) with different erosion degree were obtained. The results of agrochemical inspection were analyzed along ...

Soils2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

DESIGN CHANGE FUNCTION OF ROTARY TABLE OF A MACHINE TOOL

(STEF92 Technology, 2017-06-20, Prochazka, M., Fries, J., Onderkova, I.)

Show more

Development of energy, nuclear, engineering, petrochemical and chemical industry requires very massive and large workpieces. Requirements for machining workpieces of these department is the necessary adapt to the design and construction of machine tools. Analyses were conducted to carry out the overhaul and modernization for heavy cutting machine SKODA W 200 HC with digital subtraction, turntable S 100 C from 0 to 360°, while the carrying capacity of the turntable 100 t. The complexity of the repairs consisted of ...

Exploration and Mining2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

STUDY ON THE ASSESSMENT OF THE LEVEL OF ACOUSTIC POLLUTION IN GORJ COUNTY- ROMANIA

(STEF92 Technology, 2017-06-20, Schiopu, E. C., Popa, R. G., Pecingina, I.R.)

Show more

Acoustic or phonic pollution is a type of noise pollution caused by noises, a complex of non-periodic sounds with random disagreeable insurgency that affects the psychological and biological state of human and animal organisms. The physical or objective characteristics of the noise are the strength or sound intensity (which depends on the features of the source, the distance and the possibilities of transmission or multiplication), duration and frequency. For the determination of the noise level, sound-meters, whi...

Air Pollution and Climate Change2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

ANALYSIS OF CORE FAILURES DISTRIBUTION IN STEEL CORD BELTS ON THE CROSS-SECTION

(STEF92 Technology, 2017-06-20, Blazej, R., Judziak, L., Burduk, R., Kirjanow, A., Kozlowski, T.)

Show more

Changes of damage to the belt core that are not controlled during the exploitation can lead to dangerous accumulation of the defects (strains) in the cross cross-section. It can lead to serious weakness and even rupture of the belt. Early detection of the mic rodamage of the covers and evaluation of the increase speed of the damage allows the user to plan maintenance more precisely. Furthermore, it allows more effective cost management when conveyor belt maintenance is scheduled. In this paper, geometric data o f ...

Exploration and Mining2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Nano, Bio and Green - Technologies for a Sustainable Future
Publication

THE METHOD OF ASTRONOMICAL REFRACTION ANOMALIES ANALYSIS BASED ON AEROLOGICAL DATA

(STEF92 Technology, 2017-06-20, Posivakova, Terezia, Pilvere, I., Zeverte-Rivza, S., Krievina, A.)

Show more

The aim of this article is to study astronomical refraction anomalies. Back in 1925 Grachev and Banahevich found systematic errors in meridian observations depending on zenithal distance. Grachev suggested that these refraction anomalies arise from the inclination of the Earth's surface to the South. The airstratas of the same density were considered as parallel to the Earth's surface. But the analysis of latitude observations from the Bamberg and ZTL-180 telescopes showed there were significant systematic errors ...

Space Technologies and Planetary Science2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Ecology, Economics, Education and Legislation
Publication

INCREASING THE WASTEWATER TREATMENT CAPACITY OF SMALL SEQUENCING BATCH REACTOR TREATMENT PLANTS USING SEQUENTIAL OPERATION

(STEF92 Technology, 2017-06-20, Barsan, N., Nedeff, V., Chitimus, D., Mosnegutu, E., Fabian, F.)

Show more

Taking into consideration that Romania is confronted with many difficulties in the treatment of wastewater, especially in its rural and less populated areas, this paper proposes to present some possibilities to increase the treatment capacity of wastewater in a small Sequencing Batch Reactor (SBR) plant. The functioning of the SBR operation compartment was automated by using predefined time, i. e., a programmable controller. In order to identify the possible ways in which the wastewater treatment capacity could be...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Ecology, Economics, Education and Legislation
Publication

COMPARATIVE GEOGRAPHICAL ANALYSIS OF ENVIRONMENTAL MANAGEMENT IN THE RUSSIAN PART OF THE GREEN BELT OF FEN-NOSCANDIA AND WESTERN SECTOR OF THE RUSSIAN ARCTIC

(STEF92 Technology, 2017-06-20, Barzut, O., Kondratov, N.)

Show more

Natural resource management in the North of Russia has a centuries-long history which reflects the peculiarities of northern territory development. The specific character of natural resource management in the Arctic zone as well as in the North depends on cer-tain natural and social-economic conditions, limiting factors and environmental protec-tion measures. The Fennoscandia Green Belt is an international cross-border project. The primary goal of the ecological corridor is to provide sustainable use of natural re...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Energy and Clean Technologies
Publication

PLASTIC WASTE AS A SUITABLE RAW MATERIAL FOR THE DESIGN OF A MODULAR FLOOD BARRIER

(STEF92 Technology, 2017-06-20, Soos, L., Ondruska, J., Legutko, S., Matus, M.)

Show more

This contribution describes developments in the area of plastic recycling aimed at the reuse of waste materials for the manufacture of a useful product. Throughout development of the concept ?modular flood barrier structure?, the recovery of plastic materials was assessed, primarily, plastic waste from automobiles and industry. The investigators filed a utility model application, no. SK 5847 Y12, entitled ?Modular flood barrier structure?. Terms of the type and composition of source material, polypropylene (PP) an...

Recycling2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

-ICROMINERALOGY OF GOLD-BEARING ORES OF METASOMATIC TYPE DEPOSIT IN KAZAKHSTAN

(STEF92 Technology, 2017-06-20, Omarova, Gulnara)

Show more

Samples of ore for micromineralogical research were selected from the core of boreholes. The mineral composition of the ores, their textural and structural features were examined under an optical microscope in reflected and transmitted light, scanning electronic microscope (SEM) and energy dispersive X-ray spectrometer (EDS) with microanalyzer. Mineralization by its composition is sulfide. The nature of mineralization is imbedded. Phenocrysts are presented by separate idiomorphic grains of pyrite, aggregate interg...

Ecology and Environmental Protection2017
SGEM International Multidisciplinary Scientific GeoConference EXPO Proceedings; 17th International Multidisciplinary Scientific GeoConference SGEM2017, Science and Technologies in Geology, Exploration and Mining
Publication

3D MAGNETIC INVERSION WITH SPARSENESS CONSTRAINTS BASED ON RESIDUAL NODE SUSCEPTIBILITY

(STEF92 Technology, 2017-06-20, Xiu, Ch., Meng, X., Zhang, S., Zhang, X.)

Show more

For generalized inversion, non L2-norm inversions have been widely used in geophysical inversion to obtain sharp and blocky models. However, problems such as the boundary of anomaly body obtained by inversion is not clear enough and the recovered residual susceptibility value is far less than or greater than the true susceptibility generally exist. In this paper a new 3D magnetic inversion approach based on residual node susceptibility is proposed. The residual node susceptibility model comes from residual block s...

Exploration and Mining2017
Showing 1951-2000 of 2474 records

Connected events

SGEM WORLD SCIENCE Conferences

The EPS Library connects published research with the scientific events where it was presented, reviewed and prepared for long-term scholarly discovery.

International Scientific GeoConference SGEM
SGEM GeoConference

International Scientific GeoConference SGEM

Explore the main SGEM WORLD SCIENCE forum for Earth and Planetary Sciences, where research becomes conference presentation, proceedings publication and long-term library visibility.

Visit sgem.org
SGEM Vienna Green
SGEM Vienna Green

Green Sciences and Sustainability

Explore SGEM Vienna Green — connecting sustainability, environmental science, climate research, green technologies and interdisciplinary solutions for the future.

Visit sgemviennagreen.org

International Indexing & Global Visibility of Our Scientific Publications

SGEM scientific publications gain international visibility through a broad network of scholarly indexing and abstracting databases, citation-tracking services, research discovery platforms, and academic repositories.

Depending on the platform, our publications may be accessible as indexed bibliographic records, abstracts, citation data, DOI-linked metadata, or full-text scientific papers. Coverage and availability vary across platforms and publication years.

Scopus

Scopus Scientific Database

Compendex

Engineering abstracts
& indexing

Clarivate Databases

Scientific Databases

EBSCO

EBSCO
Science Services Database

OpenAIRE

Linked research discovery
& metadata

ProQuest

Scientific Databases
Part of Clarivate

Ulrichsweb

Global serials directory
Part of Clarivate

Crossref

We are a voting CrossRef member - the official DOI provider

Dimensions

Research discovery, citations
& metadata

ScienceOpen

Research discovery
& metadata

HAL

Multidisciplinary archive
& metadata

Petroleum Abstracts

Scientific Database
Part of Clarivate

Google Scholar

Google Scholar
Scholarly Search

Scilit

Scientific literature discovery
& metadata

RSCI

Russian Science Citation Index
Part of Web of Science

OpenAlex

Open research index
& metadata

Mendeley

Scientific Databases
Part of Elsevier

GeoRef

GeoRef — AGI
Geoscience Bibliographic Database