Browse

Anthropogenic load is the main cause of forest fires near settlements and various objects of transport or industrial infrastructure. It is proposed to mark out a point source of anthropogenic load. Similarity in the processes of propagation of anthropogenic load and diffusion heat transfer was used for simulations. The quantitative characteristic of the anthropogenic load is the virtual (possible) number of forest fires in a controlled forest-covered area. A one-dimensional mathematical model for estimating the sp...

In this paper, it was shown that the gold-modified carbon black (XC-72R + 20% Au) is able to electrooxidate the glucose under conditions, which are the most suitable for the work of the laccase-based electrode (pH = 4.5). It was established that oxygen does not participate the investigated process. The possible mechanism of the reaction was proposed. The maximum current density of 700 ?A cm-1 under the 0.4 V (Ag/AgCl) was received on the electrode with 1.5 mg of the catalyst loading within the solution, containing...

The development of dangerous hydrogeological processes takes place as a result of the action of climatic factors and of unfavourable technogenic conditions. One of the reasons of the worsening quality of land resources is the salination of soils by chemical compounds (chlorides, sulphides, carbonates) from ground and surface waters and the non-rational irrigation which results in worsening useful properties of soil. With the aim of decreasing or avoiding soils salination hydro-ameliorative measures are used which ...

The original archaic buildings were not protected in any way from adverse external influences, resulting in degradation of structures and often the subsequent destruction of the entire building. People tried to protect the buildings and this led to that they invented plaster. The plaster, as a unique product of human activity, complements the surface of the building and impresses with its final appearance and often raises the aesthetic value of the whole building. Plasters are conditioned in the course of history ...

Methane and carbon dioxide are among the most active of greenhouse gases that contribute to climate change. Anthropogenic sources have a significant share of their emission into the atmosphere. One of the major sources of emissions of these gases can be exploration activity and operating oil&gas industry. It is associated with the possibility of uncontrolled migration of reservoir gases in the course of work consisting of geological exploration and recognition of hydrocarbon deposits by drilling. In connection wit...

Since 1. January 2013 on all the vessels of a gross tonnage exceeding 400 tons there is a Recommendation in force released by the International Maritime Organization (IMO) which concerns applying a Ship Energy Efficiency Management Plan ? SEEMP. Applying SEEMP on the vessels is meant to be the way of increasing the efficient energy use of fleet within the economic and ecological scope. Its aim is to increase the efficient energy use of the vessels thanks to the decline in fuel consumption and the same CO2 emission...

Self-compacting concrete (SCC) represents a high fluid homogeneous mixture, able to fill perfectly the formwork without any external mechanical action due to the flow capacity under its own weigh. The productions of SCC demands new mix design procedure, with different constituent dosage using similar components as vibrated concrete. It contains a larger amount of powder, which allows the use of industrial by-products such as limestone filler, fly ash, ground granulated blast-furnace slag, silica fumes and others. ...

The Don River Delta represent a single hydrographic system, the development of which is characterized by the spatial-temporal variability. The functional role of the individual delta channels and their participation in the distribution of the river flow are different due to significantly different morphological characteristics and stages of development. In turn, this is reflected in the peculiarities of hydrological and hydrochemical processes. In this regard, within the delta the intensity of migration of chemica...

The need for this study arises from the importance of integrated assessment of mineral resources and improvement of metasomatic formation techniques. This is especially important for geological materials which are mined for their direct commercial value (industrial materials). This article is devoted to the study of the ore control of complex industrial minerals. The Khizovaara structure belongs to the Tikshozero greenstone belt. Within the structure, a multistage metamorphism and metasomatism processes are manife...

The monolithic pattern of rocks from two large intrusive massifs in the Fennoscandian Shield is assessed by analyzing their macro- and microfracturing. Macro- and microfracturing was analyzed on rapakivi granites from the Neoproterozoic Salmi multi-phase massif and gabbrodolerite from the Paleoproterozoic Ropruchei sill. Macrofracturing was studied on bedrock exposures in the field. Macrofracturing is understood as a fracture which is visible within the rock exposure and which varies in size from 10 cm to 100 m. M...

Pyrotechnic article are means any article containing explosive substances or an explosive mixture of substances designed to produce heat, light, sound, gas or smoke or a combination of such effects through self-sustained exothermic chemical reactions. Of the family of these products are the electric igniters framed according to the intended use in category P1 / P2 - Other pyrotechnic articles. These types of pyrotechnic articles are used to initiate the burning of pyrotechnic components that generate deflagration....

The use of electrical energy in potentially explosive atmospheres involves various particularities, fact for which there have been raised a lot of issues concerning the design, construction and exploitation of electrical equipment and installations intended to be used in these atmospheres. This paper presents the explosion protection principles implemented for the type of protection encapsulation ?m? which are based on the adoption of certain separations between the encapsulated circuits and the other circuits, by...

One of the most important properties of bitumen is - among others ? its ability to stress relaxation. This ability affects the energy absorption from the vehicles? wheels by asphalt pavement. It has also influence on deformation, damages and durability of road surface. The problem of the destruction of asphalt layers is common and current. In order to determine the physicomechanical characteristic of bitumen, in the article, a method of evaluation of stress relaxation properties in road bitumens is presented. In t...

The quantification of the influence exerted on the targets from an establishments concerned by the SEVESO II Directive requirements can be performed through the potential danger resulting by the aggregation of the gravity index and the propagation flow index. Starting from the environment?s specific characteristics, the major accident?s propagation kinetics and the distance between the target and the danger source, the paper has as goal to depict a propagation flow determination method. In this index determination...

The article presents the methodology of conducting experiments related to the process of composting under laboratory conditions. For this purpose, a set consisting of eight fully metered reactors imitating the composting process under real conditions was built. In the insulated chambers, bayonet thermometers were placed, air coolers, condensate tanks and drains were installed. During composting experiments with daily measurements, the composition of gases coming from individual reactors is examined, i.e. CO2, NH3,...

The article presents the possibilities of modern use of historical mining excavations in geotourism and industrial tourism on the examples of selected post-mining structures in Poland. Issues related to the subject matter of historic structures, such as relics of former mining works and the significance of post-mining structures as a specific type of tourist products were discussed. The methodology was proposed for making post-mining structures available for tourism purposes, including analysis of particular condi...

The article discusses well-known methods and algorithms of joint processing of geoelectric and seismoacoustic signals, which have the possibility of practical implementation for geodynamic and geotechnical media monitoring in real time. One of these methods is the solution of the equation describing the probed geological environment, which is under the joint action of the electrical signal and the components of the seismic wave. This allows us to isolate and localize parts of the analyzed medium with different inh...

The temperature of air exerts a huge impact on the life of man and his natural surroundings. Especially, the influence of air temperature is visible in terrains which are less urbanized or in rural areas, where agriculture is a dominant sphere of human activity. The aim of this paper is to present and describe the possibility of using synoptic data for the designation of surface temperature for the town of D?blin. The D?blin city is located in the Ryki district in Lubelskie Voivodeship of south-eastern Poland. Aro...

Usually, the methods for noise abatement selected in the action planning for a city are prioritize according with the implementation costs or they are secondary effects of the other measures, which has a totally different scopes. Besides the costs, another effectiveness indicator is used: the number of people benefiting from the noise reduction. The issue of the approach is the fact that this indicator is global and nobody can deduct precisely the location of the persons that benefit of measures. In this way, the ...

Investigation of methods for increasing the rate of oxidation of ferrous ions dissolved in natural water and developing techniques for obtaining high-dimensional agglomerates of oxidized iron particles, with the aim of improving the efficiency of separation processes. As a method of oxidation in processes of deironing of natural waters, aeration and oxygenation of air through ceramic membranes were chosen. The effectiveness of the aeration method of deironing is associated with the rate of oxidation of Fe II with ...

Kazakhstan is located in the arid zone in the conditions of water supply deficit. Irrigated cropping is the basis of agriculture for its southern regions. Akdalinsky irrigated massif (Almaty region, Kazakhstan) belongs to rice irrigation systems. Their exploitation causes the salinization and contamination of soils and groundwater. Mathematical modeling is the most effective method of solving hydrogeological problems associated with anthropogenic environmental impact. It is advisable to create permanent mathematic...

In this paper we presented the calculation algorithms and the software for the calculation of the moving average with various windows, for calculating the analytical expressions of the polynomial tendencies of various degrees and for the calculation of the correlation factor variation between two parameters. Trend analysis is part of the field of regression analysis that satisfies the smallest squares criterion. The difference between the calculated value of the trend surface at a certain point and the value obser...

The study was conducted to find out how the structure and diversity of microbiomes in buried soils differ from those in surface soils, and can analysis of microbial DNA from buried soils be used as a tool for paleoecological reconstructions. Samples were taken from buried soils under earthworks (burial mounds or earth fortifications) of different age, and from surface soils of the same area. Total DNA was extracted, and bacterial, archaeal and fungal abundance (by ribosomal genes qPCR) and prokaryotic biome struct...

Black Sea is one of the largest inland seas in the world and is vulnerable to land ? based pollution pressure from its littoral area that causes the degradation of the aquatic ecosystems through eutrophication. Sometimes were recorded at the Romanian littoral a macroalgae mass development, especially by the group green macro-algae, Ulva, Enteromorpha and Cladophora species which are present in associations succeeding in all the year. A comparative study of waste algal biomass microbial charge was done in order to ...

Black Sea is one of the largest inland seas in the world and is vulnerable to land ? based pollution pressure from its littoral area that causes the degradation of the aquatic ecosystems through eutrophication. Sometimes were recorded at the Romanian littoral a macroalgae mass development, especially by the group green macro-algae, Ulva, Enteromorpha and Cladophora species which are present in associations succeeding in all the year. A comparative study of waste algal biomass microbial charge was done in order to ...

The article deals with the degradation of cement beams containing polypropylene and polyvinyl alcohol fibres. Nowadays it is developed high-quality concrete that contains a minimum of reinforcement or all it is replace by micro fibres. Microscopic examination of fiber breakage and changes at fiber-matrix interface was investigated in this paper. The cement beams were stored in an aggressive environment of 3% NaCl, 5% NaOH and 5% H2SO4 for 28 days (CSN P CEN / TS 12390-11). Mechanical parameters and changes of fibr...

Gypsum paste was subjected to the temperatures up to 1000 В°C and its microstructure was investigated by SEM microscopy. The volume and mass changes were also measured and the bulk density, porosity and residual strength were determined. After heating to the 1000 В°C the structure of paste changed substantially, as can be seen in the micrographs. The structure of heated material is denser and the anhydrite crystals are bigger. The volume of the samples decreased more than 50%. The bulk density increased by 20%, wh...

It takes adequate IT tools to implement and perform information processes in an organisation. Such tools can be developed by means of popular and frequently used programs, such as spreadsheets. The tools created in spreadsheets may be consistent with the author?s signature concept of Microtools Based on the Relational Data Model (MiRel). This concept delivers specific solutions intended for representation of identified entities and ensures integrity of both data and the assumed reports and collations assumed to be...

In the East of the Russian plate oil-gas occurrences in Bashkortostan, Perm region and Udmurtia were revealed in the Vendian-Riphean sedimentary deposits. Industrial oil inflows have been obtained in a number of areas. Possible perspective intervals are associated with great depths, in particular, with the deposits of the lower Riphean. The deposits of the Lower Riphean in the territory of Bashkortostan were discovered on the Eastern-Askinskaya area. The results of a study of the material composition of rocks show...

The crystalline basement of the Tatar arch located in the eastern part of the East European Platform (Russia) is composed of the metamorphic rocks of different composition and genesis. The Tatar arch consists of two blocks of the basement. The North Tatar and the South Tatar blocks are separated by a faults system. The South Tatar arch is a granite-gneiss core of the basement. It is composed of Archaean-Proterozoic metamorphic complexes of rocks (granite-gneisses, gneisses, migmatites and granulite-gneisses). The ...

Medvezhye gas field is the oldest known one in Western Siberia and unique because of its values. At the present time most of Cenomanian deposits are exhausted. Senonian sediments, which are such nontraditional reservoirs as clayey opokas, opoka-like clays and opokas, are considered as a source of resource potential compensation. Objects of the study are 34 core samples taken from two drill holes and belonging to the lower part of Berezovskaya suite. Geochemical and mineralogical features of the rocks were studied ...

The paper presents the results of the research of ore mineralization in quartz, quartz-sulfide, quartz-carbonate-barite, carbonate-barite veins of Dyvok ore occurence. The object of the research is located in the South-East of The Sakha Republic (Yakutia) and is a part of the Stanovoy gold-bearing region. The gold mineralization was found out to belong to gold-quartz-sulfide type, to relate to the stock of Cretaceous granite-porphyry and to be located in the K-feldspar-quartz metasomatites, beresitization and arki...

Synthesis gas for an electrochemical generator was produced in a thermochemical reactor with autothermal air conversion of methane (natural gas). Based on thermal balances of the reactor, a battery of SOFCs and a boiler-utilizer (BU) for heating primary and secondary air, cathodic air and methane, the following parameters were calculated: temperature at the anode, EMF of the fuel cell, electrical efficiency (gross) of the electrochemical generator, portion of hydrogen oxidized at the SOFC?s anode and specific cons...

Microstrip devices have found wide application in various fields of radio engineering. However, such devices are made on dielectric substrates from various materials - glass,mica, ceramics, etc. In the process of manufacturing microstrip devices, it is possible to use, as etching method, this removal of excess copper coating, and removal of copper coating with special equipment, for example a milling machine . As a result, at various stages of manufacturing, material waste remains in large quantities, a solution f...

Miniaturization of microwave devices, such as directional couplers, filters, switches, etc., is an important practical problem due to the trend of integration of portable and small high-frequency electronics. In this paper, we consider the technology of developing a miniature microstrip device, which can be used in small space satellites and other aircraft, for which mass and dimensions are important. Modeling was carried out in the program for electrodynamics analysis of radio electronic devices in the NIAWR Desi...

The aim of the project is to determine the optimum geometry and different kinds of nozzles location on the drilling tools face. The optimum geometry and its proper arrangement will allow the maximum use of specific mechanical energy drilling through its reduction and minimizing pressure losses to overcome flow resistance in the nozzles of a drill bit. In their previous work, the authors showed that hydraulic power is a very important aspect, affecting the loss of pressure at the bottom of a borehole. It has been s...

Many simplifications are often made, in calculating of eigenmodes and eigenvalues of stuctures. The mass of a structure is distributed throughout the structure. However, in most cases, mass can be considered concentrated in the nodes of the structure. The procedure consists in concentrating the mass of the elements at each end thereof, followed by the summation of the mass of the elements that compete in the corresponding nodes. Generally, rotating mass components have a minor influence on the dynamic response of ...

The goal of this project was to create a detailed model of the Aral Sea sedimentary cycles. Modern methods of image processing and wavelet analysis were used to reveal the nature of lamination and determine the average and interval sedimentation rates. The results obtained were then compared with those from the radiocarbon dating. The images used in this project are photographs of core (sediment) samples taken with hollow plastic tubes. The samples were removed from the tubes by cutting them in half lengthwise, an...

Lately, high penetration of intermittent renewable energy sources into power systems requires, besides efficient technologies employment, developing adequate control strategies to improve their performance. Given that their operation flexibility is constrained by short timeframe of foresight, energy storage systems represent an attractive solution that can mitigate the natural variability of renewable power plants electricity output, providing therefore enhanced quality of supply. The nonlinearity and uncertainty ...

The article deals with the modeling of the structure of the e-learning website with the possibility of changing the user interface in accordance with the information needs of users. The most popular content management systems (CMS) and learning management systems (LMS) have many necessary features, including using an uncluttered modern editable interface and configurable LMS front page of the e-learning course. But, as a rule, these systems do not contain the component that would be responsible for the ability to ...

When documenting of existing bridges, object geometry knowledge is the highest importance. Complex construction documentation usually has limited spatial representation of the object, based on a limited number of basic forms of modeling, represented by edges, corners, planes and volume elements of the real object, and depending on the purpose, the model results must match within a certain accuracy with real object. Rehabilitation of bridges also involves the realization of detailed plans in situations where they n...

Granular sludge aerobic technology (AGS) has been extensively studied in recent years because of its advantages compared to activated sludge technology. Currently, this technology is implemented in SBR (sequential batch bioreactor) configuration. An experimental model bioreactor was designed for adapting the AGS technology to continuous flow conditions. It consists of a rectangular shape bioreactor, an area for pre-settling and recycling of granules, followed by a settling tank. This configuration is more suitable...

Methods of deductive inference that are various modifications of the principle of resolutions are quite effective in logic. The results and justifications for the fuzzy conclusion of the resolution type are widespread in the predicate calculus. The existing models of the resolution inference are effective, and also quite simple and convenient, for conventional reasoning under incomplete information and for automatic processing of uncertain knowledge in interactive systems. However, in such models the set of genera...

The anaerobic fermentation of biomass in methane-tank during the biogas production is considered. The process of individual bubbles lifting upwards and its simultaneous interaction with solid particles with mixing of the nascent substrate is analyzed. The forces acting on the bubble are given and a differential equation is developed that characterizes the biogas bubble movement in the organic mass substrate. The mathematical dependence of the flooding rate of the biogas bubble is developed and an example of solvin...

Hillslopes comprise the greater part of the landscape and as an integral part of drainage basins; they provide water and sediment to water courses. Also, hillslopes are frequently used in agriculture. Soil erosion caused by water is a natural phenomenon, but the negative effects are accentuated by human interventions in the landscape. Soil erosion and nutrient loss are detrimental to agricultural products, food security, and the sustainability of ecosystem functioning. In recent decades, the increased using of che...

The article presents a way of identifying and modeling sound features in an urbanized environment. The subject of article is focused on the problem of noise pollution modeling coming from moving technical objects, i.e. vehicles that are potential sources of noise. In this case, the vehicles are treated as multi-source acoustic energy emission objects. The proposed approach assumes the occurrence of variable relations in the system: source-path propagation-receiver. In the presented method the information carrier i...

The authors propose a model of nonlinear interaction of social network agents, which is based on a matrix generalization of the known one-dimensional logistic mapping. Similar models have not been considered previously and have not been investigated numerically. Despite the relative simplicity of the proposed non-linear model, in the course of numerical experiments, various modes of agent behavior were observed. Namely, one of the agents hesitated in making a certain decision, others were able to "agree" (came to ...

Paper focused on extension of usage of the AutoID model of transport system in laboratory. Transport model is equipped by complex AutoID system based on RFID and magnetic sensors. They are used to gather information from transport processes. The aim of solution presented in paper is to describe data flows in this physical model and to design representation of data flows and processing in simulation system Witness. This kind of model can better present behavior of data background to students and make them better un...

At the age of an increasing demand for energy we reach to an ever wider range of substances giving a possibility of its generation. A constant need for energy supplies is so strong that we are not prevented by the danger related to the storage or transport of such substances. Although we try to eliminate any risks, even a small human error may contribute to a tragedy. In the case of substantial and sudden depressurization it is impossible to conduct in situ tests at a large scale. An attempt at conducting an in si...

The finite-difference method is used to compute small local deformation of the rock slope instability Alpe di Roscioro, Switzerland. This retrogressively unstable mass failed multiply, with last large catastrophic event in 2012, when approximately 210 000 cubic meters of rock had collapsed towards Preonzo village. The remaining mass has been studied and monitored by passive seismic methods and exhibits strong directional spectral amplification. One of the monitoring seismometer detects many micro-deformations and ...