Browse

The research was aimed to study the pore water volume and chemical composition in the isolated core samples of the Bazhenov source rock formation taken from four different oil fields in West Siberia, Russian Federation. The approach is based on the complex laboratory methods of the investigation such as Dean-Stark and evaporation methods, the X-ray spectrometry, mass-spectrometric study (ICP-MS), water and Pfeffer's solution extracts. It was found that the samples contain three types of pore water: free groundwate...

Exergy analysis is a tool, which indicates how far the system departs from the state of equilibrium. Exergy has been implemented as a preferred means of characterizing the impacts of resource consumption for the purpose of improving decision-making. The present study realizes an energy and exergy analysis for a heat exchanger in operation for a district heating system. Exergy balances of a heat exchanger were therefore established to identify the thermodynamic imperfections of the process using real data. They are...

Large rotary drum machines are often used in technological lines for continuous production. These are complex structures which during operation are exposed to stresses and deformations under the influence of temperature and stress. To determine the geometric parameters of such units in this paper we propose to use a total station. The basic idea of the method is remote real-time geodetic measurement of the machine parameters in the reflectorless mode. The task posed is solved by simultaneous measuring of the point...

VRAGEO Project - Integrated Seismic Hazard Information Platform for Vrancea Zone Surveillance Through Advanced Geospatial and In-Situ Methodologies пїЅ have as main objective to enable free and open access to seismic hazard information in Romania due to Vrancea source in support of GMES (Global Monitoring of Environment and Security) through the development of an operational framework, a set of supporting tools and advanced geospatial surveillance methodologies of Vrancea tectonic active region. Information derive...

According to data reported in the EU report, critical raw materials include 20 raw materials, including rare earth heavy metals (Gd-Lu and Y) and rare earth light metals (La-Eu). Thus, rare earth metals include lanthanides of atomic number 58-71 and scandiums with atomic numbers Sc -21, Y -39 and La -57, respectively. Rare earth metals are used in many modern, innovative techniques such as optics, nuclear technology, production of permanent magnets that are part of discs for computers and automotive hybrid motors,...

Due to the increased demand and supply shortage, neodymium is listed as critical raw material of the strategic importance in many countries in the world. From this point of view the researches for the development of recycling technologies for this metal are strongly justified. The paper presents the results of laboratory research on the hydrometallurgical recycling of neodymium from hard disk drivers (HDDs). Neodymium magnets are the elements of a positioner which drives the head of the HDD. The study material- si...

The paper is devoted to the performance of a new combination between a classical closed center hydraulic feedback steering unit and an electrohydraulic servo system based on the modern generation of digital servo valves. This type of combination may represent a solution for autonomous agricultural machinery based on the high-level technologies. The research is generated by increasing world population requesting more supplies on one hand, and the obvious decreasing of rural inhabitants, augmented by the translation...

The scientific paper proposed deals with the reliability analysis of the average usage time of the brake pads as components of the braking system of the industrial front-end loader and transporter machinery used in mining operations in Romania. The research was conducted at the request of several mining companies in Romania, that are using the front-end loader and transporter machinery in their daily operations. The study is based on the empirical information and the preliminary reliability results that were recor...

The Internet and computer networks development led to the development of data acquisition and monitoring systems, becoming nowadays a necessity. This paper proposes the development of applications to monitoring parameters, both local and remote; the parametersпїЅ values are derived from a micro-weather station. Two interfaces are implemented for monitoring parametersпїЅ values: the first one is a part of a wireless sensors network (named eKoView), and the second one is implemented in C# and running on a color oper...

Using remote monitoring methods, including aerial remote sensing, UAV and LIDAR (remote sensing, 3D UAV imagery and LIDAR) for high-resolution investigations of waves field characteristic parameters near the seaports, gives us the support information for decision making process. Therefore the results obtained in near real-time are useful to create optimal resolution maps for waveпїЅs reflection, refraction and diffraction, depending on necessities. In this paper is evaluated the possibility to monitoring and mappi...

In over 38 percent of the groundwater drinking water sources in Slovakia, iron and manganese concentrations exceed the recommended levels set by Regulation of the Government of the Slovak Republic No. 354/2006 on Drinking Water. Iron and manganese are not considered health hazards, although micro-environments may be supported in wells and distribution systems which harbor microorganisms. The main concern with these metals is the color imparted by the oxidized forms that rarely goes unnoticed by the consumer. In ad...

The main goal of this present study is to determine the performance you can obtain from the implementation of fixed Building Integrated Photovoltaics (BIPV) on one family houses. The study will use a comparative method on one family houses between a flat roof, and a piched roof with two slopes, with different orientations of the plot. These various scenarios respond to urban implementation rules that are particular in urban planning. The calculations were made for a single family house with a built area of 100sqm ...

In our century and especially in recent decades the noise level reached an increasing width, becoming a polluting source of the same severity as chemical pollution. Increasing power and work speed of equipments has contributed to diversifying and increasing the number of noise sources and thus increased number of people exposed. Noise generating sources in technological procedures of processing may be of continuous nature (pneumatic energy production, water transport) or intermittent (systems for transporting mine...

The appearance of species imported in the EU, and so on the Romanian market, led to a change in consumer preference towards new species of fish (tilapia, African catfish, pangasius) and aquaculture products (shrimp, clams, oyster, etc.). One of these species is tilapia (Oreochromis niloticus) which, at European level, the import volume is about 10,000 tons / year. In order to reduce imports and increase the competitiveness of aquaculture in the EU have been taken strategic measures to develop technologies that int...

Non-electrical equipment has been used for over 150 years in industries in which likely to occur a potentially explosive atmospheres and a great deal of experience has been gained in the application of protective measures for reducing the risk of ignition of such atmospheres to an acceptably safety level. For using non-electrical equipment in potentially explosive atmospheres, it became necessary to produce ignition protection concept standards which clearly defined these protective measures and incorporated the e...

This paper shows laboratory researches in order to extract arsenic and cadmium from the polluted soils. Research is based on preliminary studies regarding the usage of microorganisms which were selected from the same sampling points of soil assays for decontamination of soil polluted with heavy metals (As and Cd). The soil samples are subjected to the cleaning process with different extraction solutions (9K medium and chemical solutions) stirred 200 rpm for 72 hours at a controlled temperature (32 пїЅC). During th...

The paper presents the need for the purification of polluted air from the highly polluting processing technology of an industrial shop. (paint shops, foundries, welding constructions, forging, etc.). The advantages of using ultrasounds in the pollutant air filtration and purification process and an ultrasonic filter designed are presented. The main computational and construction elements of the ultraacoustic system used in the design of the air filter are presented in the paper. Paper insists in the design of the ...

With a cultivated area of over 2x108ha, wheat is the largest crop worldwide by cultivated surface. For wheat crops, the production suffers loss caused by weeds, and depending on the weeding level, the fertilization level can surpass 50% (1). Weed management is just one of the technological components present in any crop technology. Given the biological particularities, wheat crop is mainly weeded with dicotyledonous species. The objective of this paper is the comparative evaluation of the classic method for determ...

The calculated energy efficiency and specified physical properties of building materials may change significantly during the initial years of a buildingпїЅs operation under real climatic conditions. Five small test buildings with different wall assemblies were built in Riga, Latvia to compare different building construction characteristics under Latvian climate conditions. The heating energy consumption, thermal transmittance, air relative humidity and other important energy efficiency and environmental parameters...

The skin is covered with a hydrolipid film that, depending on the area of the body, comprises secretions from sebaceous glands and from apocrine and eccrine sweat glands. Decomposition products from corneocytes and cornification (cellular debris and stratum corneum lipids) in the process of being shed are also present. This film provides a natural defense against pathogenic organisms but also attracts dirt and pollutants from the environment. Thus, periodic cleansing to remove debris, dirt, and odor is essential t...

The aim of this study was to determine the extent of heavy metal accumulation in soils and potential risks of metals distribution in fruits, leaf and shoots in apple trees with rootstock M9 grown near smelter and mining areas of the Drenas, Kosovo. Individual soil samples were collected from each plant to assess metal content in the immediate plant environment. Samples of soils, fruits, leaf and shoots have been analyzed for heavy metals (Pb, Cd, Ni, As, Zn, Cu, Cr and Fe) using atomic absorption spectrophotometry...

Earthquakes represent a real threat in Romania. They can cause important damages, loss of lives, socio-economic as well as cultural losses. The National Institute for Earth Physics (NIEP) is the only governmental organization responsible for monitoring the seismic activity on RomaniaпїЅs territory. NIEP provides different kind of information minutes to hours after the occurrence of a significant earthquake in Romania: near realtime information (location, depth and magnitude), ground shaking parameters and maps wit...

Authors describe the novel approach to boost the scientific data analysis performance with the data storing schema for distributed scientific research systems. This approach optimizes the workload on storage nodes and enhances the computation performance. Managing the enormous output of scientific research systems is expected to be the most technically difficult part of all recent projects producing Petabytes of imagery data. For example, NASA's EOSDIS produces several Petabytes of uncompressed data per year and w...

The modern major project on creation a unique, scientific, educational, and technological Center of space researches and technologies was launched on the base of Engelhardt Astronomical Observatory (EAO) of Kazan Federal University in 2008. In EAO educational activity in the fields of training and retraining of specialists is conducted; scientific and practical training courses take place on the following educational programs: space geodesy and remote sensing, astronomy, radio astronomy. It should be noted, curren...

Study case is situated in Caras Severin County. Every sediment transport model application is different both in terms of time and space scale, study objectives, required accuracy, allocated resources, background of the study team etc. For sediment transport modelling, it is necessary to know the characteristics of the sediment in the river bed. Therefore it is recommended to collect a number of bed sediment grap samples. These samples should be analyzed in terms of grain size distribution.To solve theoretical prob...

The Permian sedimentary succession exposed in Sirinia Basin (South Carpathians, Romania) provides a record of mixed siliciclastic-volcanic rocks. The siliciclastic rocks are represented by conglomerate, sandstone and claystone, which are grouped into nine lithofacies (Gmm/mg, St, Sh, Sm, Sr, Fl, Fr, P) occur in a predictable order as repeated fining-upward cycles. Groups of associated facies are arranged into five distinct architectural elements (gravel channels, ribbon-channel, sandy channels, laminated sand shee...

Sustainable design attempts to be perceptive to the environmental impact of the building project at each construction stage by evaluating the site, the embodied energy of the selected materials, as well as the proper construction techniques, adjusted to the local conditions. Moreover, physical hazards (flammability, corrosion) and/ or health hazards (toxicity, irritations) of the materials are especially important not only for the construction workers, building owners and occupants, but also for the environment, c...

The seismic investigation of buildings is in accordance with two important Romanian Codes, P130/1999 and the seismic design code P100-2013. Criteria for selecting buildings proposed to be seismic investigated/monitored are numerous: seismic zoning of the territory; data on structural system and types of existing structural systems, depending on the material pre and post-1940; the effect of vibration other than from the seismic vibration; location-site; seismic stations and sensors, sensors position/location in a b...

The proper selection of the structural steel grade has to take into account a lot of factors and, for structural steels, a minimum ductility is required so that the material shall have sufficient fracture toughness to avoid brittle fracture of the tension elements at the lowest service temperature. In this paper we present the methodology for selecting the toughness of structural steel with respect to EN 1993-1-10: 2003 and SR EN 1993-1-10: 2005. Establishing the steel sub-grade for the steel main girders of a rai...

The air traffic in the European Union and operation of individual airports, including service provisions, belong among the most unregulated industries. Free market economies result in keen airport competition, and especially those airports are affected that compete for customers of the same catchment area. Passengers prioritize airports not only because of the quality of the services offered and provided but passengersпїЅ priorities also reflect presentation strategies of airports, as well as their communication a...

The ground serves as an ideal heat source for monovalent ground-coupled heat pump (GCHP) systems. This paper presents a working methodology and develops an analytical model for evaluation of the ground thermal conductivity and the borehole thermal resistance using a thermal response test (TRT). Additionally, this paper uses the Earth Energy Designer (EED) simulation program developed on the basis of the line-source model to calculate the fluid temperature for a case study of the ground heat exchanger according to ...

In this work are highlighted a few basic features of the smart clothes. This concept is extremely useful, it represents the future and this time, technology will be used to monitor out body to not only make life easier for us. The smart clothes purpose is that to monitor the human body behavior throughout the day without discomforting the persons somehow. In case if it detects an abnormal reading of the data received from various sensors, using the fuzzy logic the system will issue a warning on a certain level dep...

An accurate simulation of snowmelt infiltration rates for an area of Bucegi Mountains, during spring thaw, has been made using the snow routine of HYDRUS- 1D. The model is based on coupled flow and heat transport in the vadose zone. The snowmelt routine is based on degree day concept. As boundary conditions are used, surface water and heat fluxes can be calculated from the energy balance equation. The variables of the surface energy balance equation and melt rates can be calculated using meteorological data: air t...

Along the whole history, the human civilizations were depended mainly on the soil fertility and further on the ecosystem well function and its appropriate characteristics. These functions (as natural processes occurring in ecosystems) depend on its structure (on biotic and abiotic constituents respectively) and provide ecosystem services. The paper emphasized the way that one of the ecosystem services, essential to our health and well being, as the пїЅregulation of the nutrients and their uptake? arises from the i...

The temperature of some surface and ground waters in Romania was measured during the 2015-2017 time interval at high temporal resolution in order to identify the main thermal properties and their oscillation. The water monitoring in B?ile Felix area was undertaken at Fp3 water well and Ochiul Mare Lake. The measuring sites in Geoagiu-B?i area are represented by water pumped from F3 water well and a thermal spring in Cibului Gorge. The outflowing groundwater from 2 water wells was measured in HпїЅr?ova area. In ord...

This paper presents a possible alternative solution to cold a retail center located in Brasov, Romaine. Absorption machines using thermal energy are excellent alternatives to mechanical refrigeration.The proposed solution uses a single stage absorption systems working with LiBr-water. This solution uses the water as a refrigerant which has a null direct impact on the environment (ODP=0 and GWP=1).The proposed scheme is the result of experimental research conducted by a team from the Thermodynamics, Heat Transfer a...

The management of construction waste it is at an early stage in urban areas and lacking in rural areas where this fraction is frequently uncontrolled disposed on public lands. Despite the fact some items of construction waste are considered inert for the environment (soil, concrete) it also contains hazardous items (paint additives, cans, and containers) or recyclables (plastics, metals, wood). Potential recovery of this waste stream is high if it is properly managed. The paper estimates the potential amounts of w...

Colours have a unique position among all the principles of map design and visualisation of spatial data. Colours are a part of map language, and they carry the information value. Also, colours are used for creating the hierarchy of map elements by distinguishing the important from the unimportant. Furthermore, colours are a part of the whole graphic design of any visualisation of spatial data. There is a huge number of papers focusing the theoretical basis of colour use in cartography and spatial data visualisatio...

The Tourism Resort Praid is one of the most dynamic resorts in Harghita County, Romania. In 2006, the settlement was given the title of resort. Since 2006 the resort started an accelerated development and is being affected by a series of new and old geographic risk factors. To determine these risk factors we used the direct observation method, quantitative and qualitative analysis, GIS analysis and representation, and cartographic method. Among these risk factors we will enumerate some natural risk factors like ex...

The Power Plant Rybnik (Elektrownia Rybnik) is one of many in Poland, which is coal-fired. Fly ash, as is well known, are combustion by-products, which are mineral residue from burning coal. Their phase composition depends mainly on the quality of fuel (coal) and combustion conditions. In the mineral composition of the examined ashes one has identified minerals such as: glaze, quartz, mullite, spinels, hematite, and unburnt coal. Spinels present in the fly ash can be a source of some metals, and due to the magneti...

This study comprehends the stability assessment of seven slopes with Pre-Cambrian rocks and located in traffic-access areas of SW Angola, one (Slope 1) is located on the road access from Lubango to Tundavala Gorge, another slope belongs to the CaholoпїЅs area near Humpata (Slope 2) and five of them (Slopes 3 to 7) are located on the LebaпїЅs Sierra, along the sinuous hair-pinned sections of the National Road 280. Slope 1 is composed by quartzites, volcanic rocks and lutites. Slope 2 shows sandstones, lutites and q...

Steganography is part of security science that deals with art of data hiding. Modern steganography can serve as an effective tool for hidden data transfers or watermarking for various computer formats, like JPEG, PNG, and MPEG. But it can be misused for stealing data or information transfer in illegal activities too. Most of today available steganography tools are free for use with easy user interface. This significantly increases the risk of exploiting in business sector. Revealing this data is very difficult and...

This article is referring to a short study regarding the energy efficiency status in retail industry in Romania, in particular an analysis of the big sizes commercial buildings in this matter. It contains data which will allow us to compare an existing building with the industry norms in terms of the energy consumption and energy costs. Additionally, there are some recommendations provided to be taken care of in the near future for controlling energy better, using energy in a more efficient way and reducing avoida...

Previous researches have shown the possibility of using organic-mineral additive based on glyoxal for injection strengthening of soils in roadbases and engineering communications. Saponite containing material was used as mineral component in the composition. Saponite containing material is a solid phase, extracted from the circulating water suspension of the kimberlite ore dressing. Modification of the sandy soil by the tailored organic-mineral additive content increases its specific cohesion up to 50 times. It wa...

The e-learning system eLogika serves for teaching logic. In the system there are study materials at studentsпїЅ disposal, but it also provides online tests and promotes all the activities in which the students can obtain their credits. The system collects data about users who are logged in, e.g. time spent on a particular activity, the number of activities performed by particular students, what data is a student interested in, etc. The goal of this paper is to describe the application of many-valued formal concept...

Water serves as a medium for fundamental process phases (e.g. tanning and dyeing) in leather production. The reduction of water consumption per product unit has been an environmental priority for European tanners over the years. This is possible mainly through the setting of continuous improvement objectives aiming at developing water efficient processes and water recycling technologies. The paper analyses the pickling operation, for bovine hides processing. The aim is to develop an automation system which will re...

The aim of this paper was to investigate the effect of defatted rapeseed flour addition from which proteins were extracted (DRF) on quality characteristics of bread as a finished product by baking test, rheological and microstructural examination. The dough rheological properties were determined by using the Alveograph device and its microstructure was analyzed by using the epifluorescence light microscopy (EFLM). Also, there were conducted analyses on the bread quality prepared from composite flour (wheat flour 6...

The article describes studies of the process of mineral raw refinement in dry, wet form and with addition of chemical reagents. Specific energy spent to refinement has been determined in the course of disintegration, as well as specific surface of particles before and after refinement has been measured. The values of refinement of inter-phase surface area of disintegrated mineral particles and values of specific surface energy have been calculated. With the help of performed studies one may obtain quantitative exp...

The paper aims to present the possibility of using surface water resource for irrigation in local arrangements in the West Plain of Romania. Irrigation is among the biggest consumers of freshwater worldwide and water demands for irrigation in Bega River basin are continuously increasing. On Bega River course, along with flood defense works, in the 1960 were also arranged water catchments with the role of using water in agriculture, even though most of arable land were arranged for drainage. To ensure the needed fl...

The paper deals with the theoretical and practical analysis of the influence that the cutting direction of the bucket wheel excavator has on the digging forces acting on the wheel. Usually, when the terrace cut technology is applied, the bucket wheel of the excavator cuts vertical chips where mainly the perpendicular to stratification digging method is predominant. All the laboratory trials - done on the test rig - were conducted mainly for this type of vertical chip cutting. In cases when the drop cut method is a...