Browse

There is a growing need for enhancing resilience of urban systems in the face of unprecedented urbanization and climate change for they both will likely worsen the already unstable and vulnerable nature of contemporary cities: once barely a risk, environmental factors have now the potential to become disasters. Urban resilience means that components of the urban system пїЅ be they natural, built or third environment, human capital, socio-economic activities, etc. пїЅ are able to withstand negative impacts without ...

The study was performed in order to establish the efficacy of the biological product пїЅNemagoldпїЅ in the control of root-knot nematodes (Meloidogyne spp.) on tomato crop under plastic tunnel conditions. Experiment was organized on tomato crop (cultivar пїЅPrekos F1пїЅ) strongly attached by root-knot nematode, located in south-east of Romania (Varasti-Giurgiu), during July-September 2016 period. Treatments were applied by drip irrigation during the second vegetation season. пїЅNemagoldпїЅ product having in compos...

There are many many historical buildings maintained in the world, whose construction, namely exterior wall, is made of solid masonry. These constructions have excellent thermal inertia, but also a range of humidity and thermo-technical problems. Finding a solution for these problems is a siginficant task, since most of the inner plaster is decorated with paintings, which are a cultural heritage. This paper deals with the solution to selected construction problems and their two dimensional simulation of the thermal...

пїЅBody of groundwaterпїЅ means a distinct volume of groundwater within an aquifer or aquifers. This paper has as main objective creating a three-dimensional lithological model using borehole data for ROIL16 пїЅ Plain Vlasia groundwater body. RockWorks 15 is a software package for geological data management and visualization and it was chosen for analysing sub-surface data. The initial characterisation requires the collection of detailed information and data, such as geological and hydrogeological characteristics,...

For generalized inversion, non L2-norm inversions have been widely used in geophysical inversion to obtain sharp and blocky models. However, problems such as the boundary of anomaly body obtained by inversion is not clear enough and the recovered residual susceptibility value is far less than or greater than the true susceptibility generally exist. In this paper a new 3D magnetic inversion approach based on residual node susceptibility is proposed. The residual node susceptibility model comes from residual block s...

Carpathian Foredeep (CFD) is a mature Petroleum Province, where conventional biogenic gas has been produced since 1950s. At present the CFD is again object of petroleum prospecting, this time, as unconventional gas province. To improve resolution of this analysis, regional 3D structural model was constructed and divided into six main depositional complexes by developed on the basis of seismic data and geophysical logs interpretation. The model is located along the front of the Carpathians covering area ~4500 km2. ...

The purpose of this article is to describe the modern methods of making models of quarry using the latest technologies such as laser scanning, land and air photogrammetry using Unmanned Aerial Vehicles (UAV) and their subsequent use in the planning of technological processes in the quarry. The first part of the article is dedicated to the creation of models with a focus on data collection and processing, compatibility of each format, the very creation of the model as well as the possibility of using the created mo...

The design of personalized footwear insoles involves modelling the 3D shape of the insole based on the individual feet plantar surface shape and dimensions. The advantage of custom made insoles over the mass produced ones are represented by their enhanced functionality. Custom made insoles are recommended for subjects with various foot health disorders and for subjects who undertake intensive physical activities like athletes and soldiers. During human life time, under repetitive mechanical stress, feet suffers di...

This article discusses the possibilities of using a 3D printer with parallel kinematics that can produce good quality prototype components such as various covers, handles and functional assembly for simple electronic devices or robots. It will enable combining the printer with an engraving CNC machine, so that the effector head of the 3D printer will allow the head to be exchanged for printing with an engraver head, and it will allow fine engraving on printed circuit boards. The printer effector is equipped with a...

The main objective of this article will be focused into the possibilities of 3D printing paper machine called Mcor IRIS HD and also to subscribe the principles of this 3D printer in general. This machine is not well descripted yet; so the main idea is based on how this 3D paper printer works. Also, unlike the other 3D printing materials, this paper technology is not so well-known nowadays. There will be explained how the papers are spliced layer by layer on the building platform inside the 3D printer and the proce...

This paper presents an original approach on developing and testing an extruder for paste-like materials for conventional 3D printers based on Fused Deposition Modeling (FDM) technology. The main advantage of such technology is that it allows the final product to be modified / altered after fabrication i.e. either to correct printing irregularities or simply give it another design form. The material is fed into the extrusion nozzle via a plastic cylinder driven by an electric actuator. Various extruding nozzles wer...

The historical Benedictine Abbey, which comes from the 12th century, consists of a basilica, monastery buildings and underground cellars. The underground of abbey, which is commonly unavailable for tourists, is not only historically valuable exhibit but also reveals condition of the foundations of the buildings, which has been built on a limestone hill above the River Vistula. In order to obtain spatial information of the underground of the abbey, scientists have made laser scanning of cellars and corridors under ...

Computers have replaced peopleпїЅs work in various economy sectors for quite some time. Newer and newer technologies and software are designed to improve quality and safety. Precision and accuracy are the most important, both while looking for mineral depositsпїЅ documentation and during their exploitation in the future. Most geological works are performed using proven, classical methods. However, the development of computer science nowadays is huge. More and more mining operations are performed by means of comput...

In late January of 2016 (27/01/2016) at Mining Section 14 (Block 7/10) of the Kukisvumchorr flank of the Kirovsk Mine (Khibiny), a violent seismo-dynamic event (lgE ? 8.11) took place to induce significant destructions and deformations of workings at Drill & haulage horizon 4 (4DHH) with an average elevation of +236 meter, 1DHH (+183 m), and possibly at 2DHH (+209 m), which is unavailable for examination. The dislocations, deformations and roof break formation occurred both at the cross-measure (predominantly) and...

In 2010, the municipality of Senigallia, located in Marche region (Italy), approved the Green Masterplan, drafted by the Department of Agricultural Sciences together with the Department of Territorial Planning of the Alma Mater Studiorum of Bologna, in collaboration with four architects, two agronomists, and few communal technicians, with the aim of granting a neat, homogeneous and sustainable development of the territory and improving the quality of life and the wellness of its inhabitants. Since then, many proje...

Soil erosion is one of the crucial forms of land degradation; a menace caused by soil degradation and prevailing lithological feature in southern Nigeria. Several hectares of land area and properties worth about 2.5 million USD are lost annually due to soil erosion. Besides arable lands, the vegetation which serves as habitat to several species is rapidly disappearing leading to the extinction of the native plant species. The objective of the study was to evaluate the impacts of soil-gully erosion from 1986-2016 b...

The authors of the paper compare the most important features of cadastral systems with respect to their information content included in the graphical part of the cadastre, i.e. on a cadastral map. The performed analysis covered selected countries, such as: Poland, Austria, Germany, Sweden, Norway, Finland, the Czech Republic, the Netherlands and Lithuania. Examples of cadastral maps from analysed countries are presented in the paper. Basing on performed analyses the authors prepared a list of the basic data which ...

The conversion of forest to pastoral and agricultural management has important implications for carbon storage in soils. The stationary conditions of Neamtu catchment is characterized by an altitudinal difference between 270 - 1523 meters, 418 sq. km surface area, with notable differences of morpho-lithological, climatic, hydrological and biogeographical conditions reflected in both soil diversity and carbon content differences. This study aimed at calculating and comparing the estimated soil carbon stocks in diff...

Of all geographically related health problems, pollen allergy is one of the most common allergic diseases of the respiratory tract. To support pollen allergy sufferers (including allergic rhinitis, conjunctivitis and asthma), a range of mobile applications are available for tracking pollen forecasting and recording symptoms. The geographic location of such records provides new opportunities for WebGIS pollen allergy monitoring. However, adding raw VGI data to a web map may produce more misinformation than benefits...

The impact of climate change on agricultural sector has grown in the last decades from local to macro-regional scales. Based on 14 indicators, a comprehensive image regarding the interrelationships between socioeconomic and climatic factors was obtained for characterizing the agricultural sector from Teleorman County, Romania during 6 years. An analysis of available time series was performed to obtain descriptive, associative, and comparative statistics of the data set. Pearson correlation was used to estimate the...

In order to bypass the big cities, the design of the motorways usually requires to choose the shortest route to reduce the travel times of vehicles. This leads to the construction of the road infrastructure and "works of art" over land areas that are insufficiently stable from a geotechnical point of view. In this context it is necessary to design and implement complex systems for monitoring the behavior of land surfaces and the buildings constructed on them. This article makes reference only to the geodesic and t...

The biogas obtained through processing of livestock residual waste (dung, manure and residual food), food production waste (fruit, vegetable, meat and dairy residues) and also effluents from industrial and municipal wastewater treatment plants can have a significant contribution in energy supplying and environmental protection. In order to determine the quality of this renewable fuel, it was developed a fast gas-chromatography method, through which it can be establish the calorific values, that have an important i...

The article deals with a basic economic image of the inland company Severo?eskпїЅ doly a.s. from 2010 until 2014. It is a company producing most brown coal in the Czech Republic. An economic insight into the company reveals important information for investors, but also for employees themselves, eventually it provides suppliers and customers with many useful data. The article presents basic economic indicators within a chosen period, their development and overall evaluation. It is indeed the economic analysis of th...

The surface water streams in the ore mining areas are subject to intense contamination with heavy metals and toxic elements. This type of pollution is a widespread problem nowadays. Detecting the geochemical patterns of the migration of heavy metals and toxic elements, together with their impact on natural environments, is a key aspect of ecological and geochemical research. This study is proposed in order to evaluate the state of the surface water streams in impact zones pertaining to the technogenic formations o...

Geo-electrical sections were constructed according to electrical resistivity tomography data on Shahtama tailings of Mo- ore processing plant (Transbaikal Kray, Russia), located in the permafrost zone. The capacity of technogenic deposits was determined and the zone of the fault was delineated. A wide range of electrical resistivities (ER) of mine tailings was revealed due to their different particle sizes, humidity and partially frozen condition. The statistical analysis of the distribution of resistivity of tech...

Vulnerability is an assessment of priorities for implementation in a city. It is imperative to determine vulnerable regions in the city to identify priority areas that may require immediate intervention. Nowadays, several methods used for national, international and local level vulnerability assessment are based on remote sensing and GIS technology. In this research aim to determine the vulnerability of Moscow city using a geospatial based vulnerability index for sustainable development of the city. We use urbaniz...

Building a telecommunications system based on routers allows you to use traffic prioritization to improve the quality of user traffic, regardless of network technology. This new feature, compared to networks built entirely on hubs, is a consequence of the fact that routers buffer packets before they are sent to another port. The router usually leads for each input and output port not one but several queues, each queue having its own processing priority. The efficiency of the network depends on the capacity of the ...

The evaluation of the behaviour of natural stone applied in the built heritage of the historical centre of Porto city, Northwestern Portugal, classified World Heritage by UNESCO in 1996, has been carried out using a multidisciplinary approach in order to characterize both the rock that constitutes the main body of the building and the deterioration processes that have developed on the stone as a consequence of environmental and anthropogenic factors. Among an extensive and monumental historical heritage, built wit...

The clay consists of the tiniest particles of soil, which have a considerable amount of physical and chemical activity with influence on water and nutrient cycles, observable over several scales. Therefore, the Global Soil Map Project (GSM) has included clay content among the key properties estimated across the world at 100 m resolution. Subsequently, in 2015 the Joint Research Centre (JRC) of the European Commission produced a clay content map of the soil uppermost layer (called пїЅtopsoilпїЅ), converging towards...

In parallel with technological and scientific developments in the world, people's choice on the materials is changing. In the light of these developments, mankind's environmental awareness is also increasing and thus the people aim to live in natural environments. In recent years, natural stones have started to be used widely especially inside and outside of the buildings in big cities in Turkey and the world. The low block efficiency of rocks caused to move the production of artificial stone in the construction s...

The irregularity of rock joints in rocky terrains contributes considerably to better mechanical stability of these terrains. The assessment of the stage of surface irregularities (asperities) of jointed surfaces in rock massifs plays an important role when shear strength of rock joints are evaluated. For this purpose it is necessary to analyze morphology of surface reliefs of rock joints. The digital replicas of surface reliefs are ideal tools for such a morphology analysis. This paper describes a new method for d...

Joints in rocky massifs usually form a space network that is hidden under the surface of terrains. Although normally invisible, same parts of such networks may emerge when excavation work is running in terrains. The irregularity of joint rock surfaces are characterized by joint rock coefficients that serve for computations of shear strength of these joints. This is important for evaluation of the mechanical stability not only the rock joints themselves but also for the mechanical stability of rock massifs that are...

The paper deals with the green parametric architecture as a new approach to architectural and urban design. In the twenty-first century the digital design tools, which are interfaced with the production of computer technology, have opened the new opportunities that not only are shaping the architectural objects, but also interferencing in the buildings' structures. The first part of the paper defines the main features of the "green" architecture. Selected samples show a diverse approach to designing the architectu...

In comparison with other economic sectors, the agriculture is known for its specific characteristics. First, the production processes in agriculture are supplemented by a factor of the impact of natural conditions, weather, the length of the production cycle and associated length of current assets turnover. Financing of agriculture is formed from public or private sources in the form of equity capital, loans or gifts to enhance the development of this sector. It includes not only government funds through various g...

In this work, synthesis and swelling of a superabsorbent hydrogel based on copolymer of acrylic acid and acrylamide filled with pectin were investigated. The structure, thermal stability, sorption capacity and morphologies of the developed composites were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimetry analysis (TG-DSC), voltammetry and scanning electron microscopy (SEM). In addition, the swelling properties, and the stimuli-responsive behavi...

The goal of the presented application is to find a simple way how to randomly divide n patients into 2 groups 1 and 2. The main requirement is no dependency on target platform and the application must be available online for many different medical departments. Each department must have a unique login. No higher security level such as two-factor authentication is required. The results of the division into the groups represent a random choice of patients recommended to conventional and a new treatment without any pr...

The numerous cases of the upper headwaters drying are observed in the plains of the Middle Volga region. The reasons of the streamflow change pertain to the reduction of forest vegetation and the change of its species composition. More than 1000 cartographic materials for more than 200 years, as well as aerial and satellite imagery were used during the research of forest vegetation breadth. Currently, the forest and the forest-field landscapes prevail in the north of Tatarstan, where coniferous-deciduous forests a...

Ecosystems are open adaptive systems with self-organizing properties; they are based on local interaction of the composing elements and generating a general end-result. Digital ecosystems incorporate these features in context-aware applications that work together for the efficient solving of complex dynamic problems. This article considers the digital ecosystems as being open-system of applications with a certain degree of context-awareness. It also presents Econtxt a programming model for the context used by cont...

Rare earth elements (REEs) are a group of 17 elements including scandium, yttrium and 15 lanthanides. There are a number of applications for the REE in different industries, e.g. super magnets in electrical engines in vehicles and generators in wind turbines, fluorescent lights, catalysts for the automotive end petroleum industry. REEs are crucial concerning the rapidly developing clean energy applications and with the highest risk of supply. To meet the future demand, it is necessary to develop efficient, economi...

The progress achieved over the past half century in modeling of hydrophysical processes and numerical methods, as well as the current level of computer and information technologies, led to an increasing use of 3-D models for modeling aquatic ecological systems. Nevertheless, the problem of numerical solution of systems of equations describing coupled hydrophysical, hydrochemical and hydrobiological processes is highly time-consuming and difficult from a computational point of view. In addition to computational dif...

The reliability of forecasted long-term peat settlement under embankment is primarily determined not by the soil models used, but by the specific features of peat laboratory testing. This article presents the results of oedometer tests of various-height peat samples with squeezing of pore water towards only top or top and bottom faces. The load was applied to the samples in two ways: by gradual stepwise increase or all at once. The stabilization condition for each load was sample deformation not exceeding 0.01 mm ...

This paper is a sequence that is part of the extensive analysis of the Danube Delta genesis. Sacalin island is a territory formed in the Black Sea, a short distance from the Romanian coast, in the south of the Saint Gheorghe branch of the Danube Delta, the main source of transport for alluviums. The history of this new territory is relatively recent. The first mention was in 1771. In 1856, Captain Thomas Spratt made a new map, in which the island of Sacalin appeared with two submerged nuclei. In 1924, Romanian res...

Erythromycin (E), a hydrophobic macrolide antibiotic, is prescribed for the treatment of acute bacterial infections, such as respiratory, urine, skin, and mouth infections. The main disadvantage of ER is its poor water solubility (2 mg/mL) that limits both formulation using hydrophilic bases and skin permeability. Cyclodextrins (CDs) are biocompatible cyclic oligomers of glucose, with a hydrophobic core and a hydrophilic exterior. CDs are used to improve the bioavailability of drugs by increasing their solubility ...

Mesoporous silica nanoparticles have recently attracted researchersпїЅ attention by opening a new perspective on the development of new drug delivery systems. Such mesoporous materials are characterized by a uniform distribution of pore size, welldefined walls with a high volume that enables functionalization at the level of silanol group, having a large specific surface and good hydrothermal stability. The objective of this study is the synthesis and characterization of MCM -48 and KIT-6 silicate matrices, biomat...

This article deals with the spatial position of tracks surveying using a measuring truck and automatic total station. At the beginning of work it was necessary to gain theoretical knowledge on geodetic activities carried out in the process of reconstruction works on the track surface, and to define the concept of the geometric position of the track. Collecting necessary design documentation is an essential part of the whole measuring process. Adherence to the specified accuracies and deviations in the Slovak Techn...

Energy production from renewable sources, such as wind energy, in small-scale generation systems can be increased by improving the efficiency of power generating equipment and expanding the applicability of the implemented technologies. The performance of wind turbines can be improved by developing solutions that expand the range of wind speeds over which energy can be effectively generated and by optimizing the location of wind turbines. The presented system for multipoint measurement of wind parameters (SMMWP) i...

This paper investigates a theoretical aspect of application of partial correlation functions in hydrological system analysis. The functioning of hydrological system is simulated with the conceptual mathematical model consisting of series of linear reservoirs where the inputs are synthetic time series representing rainfall on catchment and the resulting output time series represents the discharge from spring. The partial correlation functions are calculated for the input and output time series describing specific h...

The paper considers the problems of requirements formalization in the implementation of software development projects, as well as ways to solve these problems. When developing a unified model for converting requirements into a formal model, a static model describing the general concepts of the transformation of requirements into a formal model and their relations will be considered, taxonomies that classify and define the main types of requirements imposed on the requirements of the rule, approaches for pretreatme...

At present, there are tendencies in the world of depletion of ores and the involvement of low-grade and technogenic raw materials into processing. The ever-increasing scale of industrial production, with the involvement of valuable raw materials components in the processing of raw materials, led to an increase in the amount of man-made waste polluting the environment. Hundreds of millions of tons of flotation tailings accumulated in the tailings processing plants processing various ores, which contain significant ...

In connection with finding - out of a question about probable feeding of deposits by hydrocarbons, acting from the basement, the results of integrated geologicalgeochemical research of the dynamics of variation of chemical and geochemical parameters of oils and bitumen from the rocks of sedimentary cover and basement in the zones of probable inflow of hydrocarbons at the central areas of the Romashkino oil field are presented in this work. Also the results of researches on comparative studying of changes in organi...