Browse

The Yarpuz (Kakliktas) bauxite deposit is located in Antalya region southern Turkey; 35 km to the south of Seydisehir and 180 km to the north of Antalya. It is one of the bauxite deposits with the highest silica modulus (Al2O3\%60.26 /SiO2\%1.74=34.63) outcropping in the Central Taurus Mountains. The Upper Cretaceous Katrangedigi formation forms the basement and, comprises carbonate rocks. The bauxites were deposited in the paleo-karstic depressions developed at the upper part of the KatrangediДџi carbonate and, w...

The mineralogical and technological study of gold ores and dressing products demonstrate the persistence of both the ores and products of their dressing, especially Floatation concentrates. The gold loss in the tails of Floatation beneficiation are primarily associated with the smallest size fractions less than 20 microns, which make up to 70\% of the total lost gold in the Floatation tails. It is obvious that increasing the extraction of gold by Floatation is directly linked to the development of the technologica...

With contemporary development of computer techniques has been enabled execution of work by GPS satellite system in mining operations which GPS system serves for collection of data related with mining operations and explosive storage facilities. Today, these computers are part of standard equipments in the most part of mining operations. These systems offer a possibility of connection with tachograph, readers interested in the data of mining operations, measurement of coordinates by handheld GPS, transfer of data i...

The test network of geodetic base is located at the territory of the park Jelenovac in Zagreb. The test area is rather unstable and suspected of ground subsidence. The geodetic base has therefore been renewed and established for the purpose of monitoring and analysing vertical movements of the geodetic control network. The state of the existing geodetic control points has been recorded and damaged points have been renewed, and destroyed points stabilized anew. The stabilization of points has been made on concrete ...

Specific statistical methods can be used when monitor the degree of water pollution in a target zone. The purpose of usage of time series properties is to understand the driving forces and structures that produce the observed data and to fit the data into a model and proceeds them to forecasting, monitoring or even feed back and feed forward control. The essential difference between modelling data via time series methods and using the process monitoring methods is that in time series analysis the data points taken...

The Act on protection and conservation of cultural goods has been in force in the Republic of Croatia since 1999. It defines types of cultural goods and measures for their protection and conservation. The main authority for protection and conservation of cultural goods is the Ministry of Culture. This paper will describe geodetic works on saving a protected cultural monument. Results of the analysis of movement measurements over a longer time period will give insight into the real conditions and enable experts to ...

A new practice has started to be implemented in Kosovo, in this south-eastern region of Europe, and it is 24-hour monitoring of vehicles and facilities with strategy for the development of mines in Kosovo with the help of GPS system. These vehicles and static facilities (the explosive storage) have a sophisticated system, which enables a precise monitoring of movements in and around them. Global Positioning System (GPS) currently presents the greatest achievements and application in the communication technology. B...

Floods are river basin wide phenomena and they often create common problems with locally varying intensity. The flood disaster management is highly dependent on early information and needs forecasts and data from the river basin as a whole. The starting point for flood risk management planning is the assessment of flood risks, based on the information about the river basin and floods in the past. The next step is developing strategies for reaction when flooding events are prognosticated, and evaluation of these st...

In process of pig iron production besides main product, pig iron, also secondary products are formed, that have character of secondary raw materials and industrial wastes. The most abundant secondary product originating in the process of pig iron production, is blast furnace slag, its occurrence is about 300 to 500 kg for one ton of pig iron. Blast furnace slag originates from melting of gangue parts of metal bearing materials, slag forming additions and coke ash. Its chemical, mineralogical and physical – chemi...

The demands of the Romanian contemporary society are indissolubly related to the rapid development and modernization of the infrastructure. At the same time, the scientific research is moving towards the new directions imposed by an increasingly dynamic society and economy. In this context, inter- and trans-disciplinarity are required by the need to prepare new types of approaches, methods, techniques and technologies, to be able to answer the social and environmental impact produced and molded by the infrastructu...

In this study, a singularly perturbed convection-dominated diffusion equation is solved by using a non-polynomial spline method. An example is solved to assess the accuracy of the method. The numerical results are obtained for different perturbed values ($\epsilon$ ) of equation. The results indicate that non-polynomial spline method is effectively implemented. It is seen that results are compatible with exact solutions and consistent with other existing numerical methods.

In this paper, we have discussed a third-degree non-polynomial spline solution for the numerical solution to nonlinear boundary value problems (BVPs) and compare other metods. Two numerical examples are given to illustrate the efficiency and performance of the method. The method gives accurate results in both the linear and nonlinear cases.

Most crude oils include paraffin that crystallize in low temperature to create cluster, precipitated in the form of sediments and making the free flow of oil more difficult. Such situations take place mainly in the autumn-winter season. Created sediments settle on the surfaces of mining equipment, pipes and reservoirs. This situation cause exploitation difficulties connected with increased flow resistance and in consequence decrease or lack of oil flow in pipelines. In order to protect of pipes and machinery again...

Numerical models which are used for determining deformation are created as a simplified form of physical reality and they are usually defined as force or timedependent. The deformation is investigated by static, kinematic and dynamic models. From these models, dynamic deformation model describes the relationship between the forces and the changes of forces depending on time and the external factors which cause deformation. The deformation in an area is determined by evaluating together the theoretical dynamic mode...

Various heavy metals contained in fuel are released to environment at fossil fuels use. Mercury has come to front of public interest recently. The North West Bohemia region is an area with high potential concentration of Hg emission sources (open pit brown coal mines) and large combustion facilities (power and heat stations) combusting fossil fuels. Mercury is taken for one of the most environment loading matters because its stability and bioaccumulation potential of itself and its compounds. More detailed regulat...

The great reserves and also convenient conditions for the use of coal represent very strong arguments for the justification of private capital investment in the energy sector of the Republic of Kosovo. The trend of living standard increase, development of industry and market demands within the South-East Europe pose the need for the construction of new power generation capacities. Therefore, the purpose of this paper is the introduction of possibilities for the coal supply of generation capacities up to 2000 MW in...

Chlorine disinfection is a generally used process for eradication pathogenic microorganisms from drinking water to prevent water-born diseases. It has been demonstrated that natural organic matter (NOM) in raw water may react with chlorine to form disinfection by-products (DBPs) which are carcinogenic or mutagenic. The occurrence of disinfection by-products (DBPs) in drinking water has been an issue of major concem during the last years due to their adverse health effects. The development and optimization of analy...

The aim of this work is the optimization of sinter-crystallization regime of a glassceramic from a municipal solid waste incineratior (MSWI) bottom ash. The parent waste was melted at 1400oC, milled below 75 $\mu$m and the obtained glass powders were pressed at 100 MPa. The optimal temperature for sinter-crystallization was estimated by DTA, dilatometry and XRD. Subsequently, the degrees of sintering, obtained at different heating rates (between 2 and 40oC/min) and 1 h step at 950oC were estimated by the linear sh...

Organic matter of lignites from five Tertiary deposits in the Czech Republic was studied and the general goal was to characterize a series of different coal lithotypes in relation to depositional environment from the viewpoint of organic petrology and geochemistry. Coal samples were chosen to cover various lithotypes: xylite rich coals, matrix coals, liptobioliths, and sapropelic coals. The samples differ in ash, sulphur, carbon, hydrogen, oxygen and volatile matter contents, and calorific values. Xylite rich and ...

Phosphorus (P) waste output, notably in the dissolved form (DWP), is a major concern for many fish culture operations. Fish are believed to excrete DWP via the urine but this aspect has never been examined in detail. A better understanding of P utilization and renal P handling of fish could aid development of nutritional strategies for the management and reduction P waste. Rainbow trout were fed high corn gluten meal diets, supplemented with dibasic calcium phosphate, containing increasing P levels (0, 75; 1, 15; ...

Gouda Nature cheese maturation is the most difficult operation of the whole technological manufacturing process. This paper shall present some of the physical chemical modifications that occur during this kind of Gouda cheese maturation, and the value of these parameters at the end of the validity period.

A detailed investigation of physical and chemical properties of pyrite cinders from sulfuric acid production has been carried out by employing variety of analytical methods and techniques, including ICP-MS, XRL, XRD, M\"ossbauer Spectroscopy, SEM-EDX, SQUID, TGA, etc. The study is focused on the investigation of the content and distribution of about 50 micro- and trace elements in magnetically separated fractions, and among/within individual particles. It has been found that many heavy metals exist in easily avail...

Ambient particulate matter contains numerous organic species, including several polycyclic aromatic hydrocarbons (PAHs) that are known or suspected carcinogens. Atmospheric particles were collected using low-volume sampler on glass fiber filters among August 2007-June 2008. The study area is under the influence of heavy traffic. Filter samples were extracted with petroleum ether /n-hexane by ultrasonic agitation, concentrated, and measured at trace levels using gas chromatography–mass spectrometry. The method wa...

In this study, some attention will be paid to the recent scientific and technological developments in waste stocks remediation. The consideration will be focused on this still not developed area of practical application of polymers as a first step towards remediation of polluted waste stocks. Some function and utility of organic polymers will be offered, which behave similarly to those naturally present in soils that are to be considered as potential substrata for remediation and rebuilding of depleted waste stock...

The Makran coast of Iran is exposed to the long waves generated in the Indian Ocean. The coast experienced huge waves induced by tsunami and cyclone during the past decades. Using the impact of the past events we present potential inundation areas for the great waves on the Makran coast. Based on the value of long wave height, three flood zones are specified on the inundation map. The first zone associated with no considerable inundation on uplifted rocky shore, the second zone would experience up to a few kilomet...

We consider a model of viscosity $\eta$ of volcanic lavas. The equation, describes with high accuracy the existing experimental data on temperature and pressure dependence of viscosity of igneous materials. It is demonstrated that, the activation energy E(Tg) can be expressed through the glass transition temperature Tgo. The dependencies of the parameters of the viscosity equation are discussed for most of geoscientifically relevant systems. According to the model viscosity of lava depends on the depth inside the ...

Perspective conception is characterized by including of wastes assembly problems in sphere of general actions for environment protection taking into account as any nonvalorized waste or least non-used, pollute the environment. Processing of solid minerals sterile and obtaining of sub-products which are economically usable has major importance, both from economical and ecological point of view, through environment protection. Researches had followed elaboration of ecological technologies of processing the waste as ...

Climate change can alter the demand for water, with demands increasing during dry, warm periods and decreasing during cool, wet periods. Climate change may impact a municipality’s ability to provide water to existing customers and their planning for the future. New sources of water may be required, and the evaluation of these new sources should consider potential climate change. Land use activities exert pressure on water resources. To anticipate this change in climate and land use activities and to assess its i...

The present theme approaches a very characteristic theme, analyzing the impact of wastes generated by tabular and calcified alumina industry on our environment. The industrial unit that is the object of this present study S.C. “Alor” S.A. is located in the Oradea municipality. Oradea municipality is located in the north-western part of Romania and is crossed over by the River Crişul Repede. S.C. “Alor” S.A. has as main activity profile tabular and calcified alumina production in various production section...

Since the geodetic control points are the base for all surveying tasks, the quality of these tasks will directly depend of the quality of geodetic control. The main two elements of geodetic network quality (accuracy) are its precision and reliability. There are different precision and reliability measures for the geodetic control. The positioning precision, as one of the most important component of geodetic network quality, has been expressed in various ways depending on the positioning method. The standards have ...

Sedimentation in water reservoirs is a serious problem observed throughout the world. Its reduction is critical to ensure sustained socio-economic development. Mangla reservoir, the largest earth filled reservoir in Pakistan, was completed in 1967 with a gross storage capacity of 7280x106m3. Over the years (1967-99), this dam has been plagued by a massive inflow of sediments resulting in a reduction of 19 \% of its total storage capacity. This led to not only a decreased water supply to the farming community but a...

In the given work statistical processing of the existing base of long-term historical data of the River Kura «Mtkvari» water quality parameters (some biogenic substances: nitrate NO3 and nitrite NO2 ions) for the period of 1980 – 1989 in some large settlements is carried out, in particular, above and below cities Borjomi, Gori, Tbilisi and Rustavi. Results for the small settlement Khertvisi located close to border with Turkey were also used as the representative data. There is offered the simple methodology of...

Long-term periodic measurements of content of radioactive gas – radon Rn-222 in tap water for different districts of Tbilisi city depending on time (during the period from January, 2009 till December, 2009) were carried out. It is shown, that according to the level of radon content in tap water the investigated districts can be divided conditionally into 2 groups: with rather big radon content – more than 1 Bq L-1 (ranged in the interval 2.15 ± 1.17 Bq L-1, districts Vake, Saburtalo, Ortachala), and districts...

There are presented results of periodic measurements of radioactive gas - radon content in sea, river and drinking water in resort zone Ureki-Shekvetili at the Black Sea coast of Georgia during the period from September, 2008 till October, 2009. It is shown, that the level of radon content ranges in interval 0.12 – 0.44 Bq/L in sea water, 0.15 - 0.58 Bq/L and 0.13 – 0.59 Bq/L in river water for river Natanebi and river Supsa, accordingly, 7.9 – 14.0 Bq/L and 1.19 – 4.35 Bq/L in drinking tap and artesian wa...

The main goal of core analysis is to reduce uncertainty in reservoir evaluation by providing data representative of the reservoir at in-situ conditions. Core analysis has to be integrated with field and production data to minimize reservoir uncertainties that cannot be addressed with other data sources such as well logging, well testing or seismic. These requirements define the coring objectives, core handling and core analysis scheme. These objectives cannot be achieved by coring a single well. Coring program is ...

Nickel-copper (Ni-Cu) mining and smelting activities within Selebi Phikwe area, Botswana is suspected to be having negative impact on the biophysical environment; thereby influencing the health of residents of this growing urbanised settlement. This paper focuses on relating the biophysical environmental hazards emanating from mining activities to human health status of residents of the study area. Mineralogical analysis of samples of tailings dump, soils, and particulate air matter (PAM) were conducted. Concentra...

Pollution abatement of wastewaters coming from textile industry still remains a major concern for environmental risk, representing serious threats both for environment and human health. Among the modern techniques the microemulsification appears to be one of the most promising methods, being used in various processes such as separation, concentration, extraction, etc. This paper presents the application of two microemulsion systems: water/Brij 30/iso-propanol/pine oil and water/Brij 30/ethyl acetate in removal of ...

The presence of heavy metals in environmental factors remains among the most important concerns at national and international levels, while at the same time novel biomaterials usually derived from agricultural wastes are designed and tested for their removal below admitted limits. In this respect efficiency of biosorption of Hg2+ and Pb2+ on corn cobs have been studied for different working parameters: initial solution concentrations of heavy metals, particle size of biomass and temperature. The kinetic model for ...

This paper presents out researches in the area of Geographic Information Systems (GIS) and geovisualization. As one of the results, we will present a solution that consists of geodata styling document repository and editor. This solution is a part of a larger GIS interoperability platform – GeoNis. As a language used for creating geographic data styling documents, we have chosen Symbology Encoding (SE) language proposed by the Open Geospatial Consortium, Inc. (OGC) organization. Integrated Symbology Encoding Edi...

This paper highlights several aspects regarding energetic and functional advantages of hydraulic transmissions based on adjustable volumetric machines, located in their primary and secondary sectors. To this end, numerical simulations were performed upon hypothetic hydraulic transmissions of primary or secondary adjustment, as well as numerical simulations and experimental research on MOOG radial piston pump type RKP-D. This servo pump, which can operate either in closed loop of flow or in closed loop of pressure,...

Calculations fluoride-calcium balance in mineral waters in the Southwest Transbaikalia are carried out.

Returnable and non-returnable losses rise during melting and casting of molten metal. Non – returnable losses arise by melting and metallurgical treatment of molten metal as a back wash of evaporation, chemical reactions between molten metal and refractory lining, molten metal and air and between molten metal and refining additions. Value of these losses depends on the kind of alloy, on used furnace and charge quality. Except non-returnable losses, the returnable losses creates by melting. They represent a diffe...

The aim of the present research work is to investigate the possibility of adding a mixture of non-granulated blast furnace slag (NGBFS) and steel slag, two wastes resulting from metallurgical industry which underwent calcinations previously, in the raw meal for the production of Portland eco-cement clinker. For this purpose, the NGBFS and steel slag from ArcelorMitall Steel Galati were analyzed for chemical, mineralogical and heavy metals contents. Two samples of raw mixes were prepared, one with typically raw mat...

In this study, simulation modelling of insulation layer (di), for residential buildings in 81 cities classified into four climatic regions in Turkey was. This stimulus model is constructed into Rule-Based Mamdani-Type Fuzzy Modelling (RBMTF) using input parameters (Uw, Te,Met, Te,TSE, Rwt, qTSE) and output parameter di described by RBMTF if-then rules. RBMTF has been designed using the MATLAB fuzzy logic toolbox.

A number of scattering and diffraction problems concerning semi infinite wave guides have been solved by many authors and for many years. Theoretical analysis of electromagnetic wave scattering and diffraction problems has been investigated extensively with regard to a number of scatterers which have physical and geometrical discontinuities. As is well-known, Sommerfeld introduced the exact solutions to the diffraction by a wedge by defining the idea of multiple-valued functions. His method is known as the Sommerf...

The side scan sonar is the main tool for deep marine archaeology research but is also equaled significant in mapping of underwater geophysical features. Ancient and modern shipwrecks can be located with the correct translation of sonar records in conjunction with visual inspection. During a short but difficult side scan sonar survey (for documentary film purposes) in searching for the shipwreck HERAKLION (without results), at the sea area north of Antimilos island (South Aegean Sea, Greece), we recorded two intere...

Surface and core sediment samples from the Iranian continental shelf of the Gulf of Oman have been studied using standard sedimentological techniques. Based on the grain size analysis of surface and core sediments, the silt fraction is the common sediment type in the Makran shelf. It ranges from 40\% up to 76\%. The amount of clay fraction varies from 19\% to 54\%. Sandy sediments appear in some cores up to 20\%. Mean content of organic matter and calcium carbonate in the sediments is around 1.75\% and 15.4\%, res...

In this paper we report the experimental measurements of Vp-Vs on Triassic marble samples that are Mugla White and Aubergine from Mugla region. The measurements of P-S wave velocities were performed at room temperature and high confining pressure up to 300 MPa in a heard type pressure vessel at ETH Zurich using the pulse transmission technique on 26 mm diameter cores. The white Mugla marble was isotropic and displayed Vp of 6.86 km/s and Vs of 4.34 km/s at 300 MPa confining pressure. The Aubergine marble from Mugl...

Geographic Information Systems (GISs) are very useful tools for managing, checking, and organizing spatial information from many sources and of many types in thematic layers. One of the most important applications of geographical information system (GIS) is the site selection for various problems. The main purpose of this research is the selection of the best place for establishes the processing plant next to the one mineral deposit, which is located in Howe Hill in United Kingdom (UK), using of IDRISI software. T...

The properties of individual particles, rather than bulk aerosol characteristics, determine the environmental and health impact of the atmospheric pollutants. Single particles have been sampled during 30 fog episodes at the mount Milesovka (837 m a.s.l.) located in the industrially polluted area of north Bohemian brown coalfield. More than 2000 of these solid, water insoluble particles, collected from May 2006 till July 2007, have been analyzed by SEM-EDX and classified according to their shape, size and elemental...