SWS Academic Research eLibraryEarth & Planetary Sciences

Scholarly record

17th International Multidisciplinary Scientific GeoConference SGEM 2017, Science and Technologies in Geology, Exploration and Mining, Vol. 17, Book 1, Volume 3

International authors

First published: 2017https://doi.org/10.5593/sgem2017/13View metrics

Publication details

Title
17th International Multidisciplinary Scientific GeoConference SGEM 2017, Science and Technologies in Geology, Exploration and Mining, Vol. 17, Book 1, Volume 3
Authors
International authors
Proceedings
International Multidisciplinary Scientific GeoConference SGEM 2017
Publisher
STEF92 Technology
Year
2017
Pages
Not available yet
ISSN
1314-2704
ISBN
Not available yet
Language
en
Publication type
Proceedings Volume
Keywords
Science and Technologies in GeologyExploration and Mining
Papers in this volume125
  1. 3D MAGNETIC INVERSION WITH SPARSENESS CONSTRAINTS BASED ON RESIDUAL NODE SUSCEPTIBILITY DOI: 10.5593/sgem2017/13/s03.001
  2. 3D MODELING METHODS IN PLANNING OF TECHNOLOGICAL PROCESSES IN QUARRY DOI: 10.5593/sgem2017/13/s03.002
  3. ABOUT THE VARIATION OF META-SILTSTONE DEFORMATION-STRENGTH PROPERTIES UNDER THE DIFFERENT SCALES DOI: 10.5593/sgem2017/13/s03.003
  4. ADVERSE SUBSIDENCE IN MINING AREAS - RECLAMATION OPTIONS DOI: 10.5593/sgem2017/13/s03.004
  5. ALGORITHM AND SOFTWARE DEVELOPMENT FOR OPTIMAL MANAGEMENT OF METHANE DRAINAGE SYSTEM AT LUPENI COLLIERY DOI: 10.5593/sgem2017/13/s03.005
  6. AN IMPROVEMENT ON THE IMPACT RESISTANCE TESTS FOR EXPLOSION-PROOF ELECTRICAL EQUIPMENT DOI: 10.5593/sgem2017/13/s03.006
  7. AN INNOVATIVE SYSTEM TO TEST COMPONENTS OF MINING MACHINERY CONTROL HYDRAULICS DOI: 10.5593/sgem2017/13/s03.007
  8. ANALYSIS OF CORE FAILURES DISTRIBUTION IN STEEL CORD BELTS ON THE CROSS-SECTION DOI: 10.5593/sgem2017/13/s03.125
  9. ANALYSIS OF DEGRADED POST-MINING AREAS FOR RE-DEVELOPMENT - CASE STUDY DOI: 10.5593/sgem2017/13/s03.008
  10. ANALYSIS OF IMPACT OF OHS TRAINING QUALITY ON KNOWLEDGE OF WORKERS IN MINING COMPANIES IN THE FIELD OF OCCUPATIONAL SAFETY DOI: 10.5593/sgem2017/13/s03.009
  11. ANALYSIS OF INFLUENCE OF THE AIR CONDITIONING ON THE AIR PARAMETERS IN UNDERGROUND MINE WORKINGS DOI: 10.5593/sgem2017/13/s03.010
  12. ANALYSIS OF ORGANIZATIONAL CULTURE AND IMPACT OF DECISION RESULTS ON THE EFFICIENCY OF LARGE ENERGY ENTERPRISES DOI: 10.5593/sgem2017/13/s03.011
  13. ANALYSIS OF STRESS STATE IN SLOPE WALL TO EXPLOITATION IN CETATE QUARRY - ROSIA MONTANA DOI: 10.5593/sgem2017/13/s03.012
  14. APPLICATION OF CHOSEN ELEMENTS FROM JAPANESE PRODUCTION AND MAINTENANCE MANAGEMENT PHILOSOPHIES IN POLISH COAL MINES DOI: 10.5593/sgem2017/13/s03.013
  15. BASIC CHARACTERISTICS OF FANS USED IN UNDERGROUND SPACES DOI: 10.5593/sgem2017/13/s03.014
  16. BLASTING PARAMETERS ALTERNATE SELECTION AS A TOOL FOR ELASTIC WAVE EFFECT AMPLIFICATION AT POTENTIALLY INSTABLE LOCATIONS WITHIN MAIN ROOF STRATA DOI: 10.5593/sgem2017/13/s03.015
  17. CLASSIFICATION AND ASSESSMENT OF ABANDONED MINING WASTE FACILITIES IN THE CZECH REPUBLIC DOI: 10.5593/sgem2017/13/s03.016
  18. COMPARISON OF PUNCTURE RESISTANCE TEST RESULTS FOR DIFFERENT CONVEYOR BELT DESIGNS DOI: 10.5593/sgem2017/13/s03.017
  19. CONSIDERATIONS ON THE IGNITION SENSITIVITY OF EXPLOSIVE FIREDAMP MINES ATMOSPHERES DOI: 10.5593/sgem2017/13/s03.018
  20. CONSTRUCTIVE IMPROVEMENTS OF CABLE TENSIONING MECHANISM FOR DEC DEVICES DOI: 10.5593/sgem2017/13/s03.019
  21. CONTINUOUS TRANSPORTATION SYSTEM MODELLING IN ONE OF UNDERGROUND MINES FOR THE PURPOSE OF ORE FLOW SIMULATION DOI: 10.5593/sgem2017/13/s03.020
  22. CONTRIBUTION TO THE ISSUES OF THE MINE GAS METHANE OUTPUT IN THE OSTRAVA-KARVINA COALFIELD DOI: 10.5593/sgem2017/13/s03.021
  23. CORRELATION BETWEEN THE LENGTH OF WAITING TIME AFTER GROUP BLASTING AND ROCK-BURST PREVENTION EFFECTIVENESS-CASE STUDY FROM A POLISH COPPER MINE DOI: 10.5593/sgem2017/13/s03.022
  24. COST MANAGEMENT OF MINING PROJECT LIFE CYCLE DOI: 10.5593/sgem2017/13/s03.023
  25. DEGRADATION OF THE STATE OF A BALL TRACK AT THE ZP 6600 DOI: 10.5593/sgem2017/13/s03.024
  26. DESIGN AND TEST RESULT OF THE NEW SOLUTION HYDRAULIC ROOF SUPPORT FOR LOW SEAMS DOI: 10.5593/sgem2017/13/s03.025
  27. DESIGN CHANGE FUNCTION OF ROTARY TABLE OF A MACHINE TOOL DOI: 10.5593/sgem2017/13/s03.026
  28. DESIGN OF A FEEDING STATION IN ECOLOGICAL TRANSPORTATION SYSTEM OF RAW MATERIALS DOI: 10.5593/sgem2017/13/s03.027
  29. DESIGN OF AN ACTUATOR AND A CRANE CRAB FRAME FOR A DOUBLE-GIRDER CRANE IN THE MINING COMPANY DOI: 10.5593/sgem2017/13/s03.028
  30. DESIGN OF TECHNOLOGY FOR MACHINING OF THIN-WALLED RACK OF HOUSE FOR CARRIER PIPE CONVEYOR DRIVE ROLLER. DOI: 10.5593/sgem2017/13/s03.029
  31. DEVELOPMENT AND VALIDATION OF A NEW CONSTRUCTION OF IMITATOR OF MINE INSULATING SELF-RESCUER DOI: 10.5593/sgem2017/13/s03.030
  32. DEVELOPMENT OF A MODEL OF FIRE PROPAGATION FOR THE IMPLEMENTATION IN ADAPTIVE TRAINING SIMULATORS DOI: 10.5593/sgem2017/13/s03.031
  33. DEVELOPMENT OF AN EXPRESS-METHOD TO CONTROL DAMAGES IN UNDERGROUND MINING EXCAVATIONS UNDER ROCKBURST HAZARDOUS CONDITIONS DOI: 10.5593/sgem2017/13/s03.032
  34. DIAGNOSTIC PARAMETERS EXTRACTION FOR TECHNICAL CONDITION ASSESSMENT OF SPLICES IN STEEL CORD CONVEYOR BELTS DOI: 10.5593/sgem2017/13/s03.033
  35. DIRECTIONAL HYDRAULIC FRACTURING BASED ON TENSILE LOADING DOI: 10.5593/sgem2017/13/s03.034
  36. DYNAMIC AND DURABILITY TESTS OF DRILLING RIG FOR NARROW VEIN DEPOSITS DOI: 10.5593/sgem2017/13/s03.035
  37. ECONOMIC ANALYSIS OF STEEL CORD CONVEYOR BELTS REPLACEMENT STRATEGY IN ORDER TO UNDERTAKE PROFITABLE REFURBISHMENT OF WORN OUT BELTS DOI: 10.5593/sgem2017/13/s03.036
  38. EFFECTIVENESS OF GASEOUS CONTAMINANTS REMOVAL IN A REACTIVE DEPOSIT IN THE EVENT OF EMERGENCY DURING AN UCG EXPERIMENT DOI: 10.5593/sgem2017/13/s03.037
  39. EFFICIENCY OF DUST SUPPRESSION IN OPERATION OF OPEN PIT MINES DURING WINTER PERIOD DOI: 10.5593/sgem2017/13/s03.038
  40. EFFICIENT APPLICATION OF STRIPPING SCHEMES FOR MINERAL DEPOSITS: CONVENTIONAL AND ADVANCED TRANSPORTATION OF ORE IN DEPENDENCE OF ANNUAL PRODUCTIVE CAPACITY OF UNDERGROUND MINES DOI: 10.5593/sgem2017/13/s03.039
  41. ENGINEERING-GEOLOGICAL AND GEOECOLOGICAL SUBSTANTIATION OF MINING SAFETY AT A UNIQUE DEPOSIT OF HIGH-GRADE IRON ORES (KURSK MAGNETIC ANOMALY, RUSSIA) DOI: 10.5593/sgem2017/13/s03.040
  42. EVALUATION OF MINE SUPPORT STRESS STATE ON BASE OF CONVERGENCE MEASUREMENT DATA DOI: 10.5593/sgem2017/13/s03.041
  43. FIRST ROMANIAN COMPUTATIONAL SIMULATION OF AIR-METHANE MIXTURE EXPLOSION DOI: 10.5593/sgem2017/13/s03.043
  44. FORECAST TRENDS AND NEW POSSIBILITIES OF USING SOME OF SELECTED EARTH RESOURCES DOI: 10.5593/sgem2017/13/s03.044
  45. FUNCTIONAL ANALYSIS OF INDUSTRIAL VENTILATION INSTALLATIONS DOI: 10.5593/sgem2017/13/s03.045
  46. GENERATING KNOWLEDGE ABOUT THE DOWNTIME OF THE MACHINES IN THE EXAMPLE OF MINING ENTERPRISE DOI: 10.5593/sgem2017/13/s03.046
  47. GEOMECHANICAL ASPECTS OF LARGE-SCALE MINING AT THE KHIBINY CONTIGUOUS APATITE DEPOSITS DOI: 10.5593/sgem2017/13/s03.047
  48. GEOTHERMAL CONVERSION OF ORGANIC MATTER IN THE CARBONACEOUS MEDIUM OF THE PRESENCE OF HOMOGENEUS OXIDATION CATALYSTS DOI: 10.5593/sgem2017/13/s03.048
  49. IDENTIFICATION OF HYDROTHERMAL ALTERATION ZONES IN GRANITIC AREAS USING MAGNETIC SUSCEPTIBILITY. AN EXAMPLE IN NW PORTUGAL DOI: 10.5593/sgem2017/13/s03.049
  50. IDENTIFICATION OF LOADING PARAMETERS FOR BELT CONVEYORS OPERATING IN KGHM-S MINES DOI: 10.5593/sgem2017/13/s03.050
  51. IMPACT OF THE PACE AND ADVANCE OF EXPLOITATION ON THE SEISMIC HAZARD- CASE STUDY FROM A POLISH COPPER MINE DOI: 10.5593/sgem2017/13/s03.051
  52. IMPLEMENTATION OF INNOVATIVE PROJECT FOR MONITORING AND RECORDING OF DISTRIBUTION OF EXPLOSIVE MATERIALS IN BITUMINOUS COAL MINE DOI: 10.5593/sgem2017/13/s03.052
  53. IMPROVEMENT OF A MINING TECHNOLOGY FOR NEAR OPEN-PIT RESERVES EXCAVATION IN THE NORTHERN CONDITIONS DOI: 10.5593/sgem2017/13/s03.053
  54. IMPROVEMENT OF PROJECT DECISIONS EFFICIENCY AND COST OPTIMIZATION AT THE MINE ENGINEERING STAGE OF RECLAMATION IN THE CONTEXT OF OPEN PIT ORE MINING DOI: 10.5593/sgem2017/13/s03.054
  55. IMPROVEMENT OF THE WORK SAFETY MANAGEMENT SYSTEM IN HARD COAL MINING WITH SPECIAL REFERENCE TO THE PROBLEM OF WORKERS PARTICIPATION DOI: 10.5593/sgem2017/13/s03.055
  56. INFLUENCE OF AUXILIARY VENTILATION DEVICES ON A DISTRIBUTION OF METHANE CONCENTRATION AT THE CROSSING OF LONGWALL AND VENTILATION ROADWAY DOI: 10.5593/sgem2017/13/s03.056
  57. INFLUENCE OF PHYSICAL-MECHANICAL AND TECHNOLOGICAL CHARACTERISTICS OF COAL AND OVERBURDEN ROCKS ON THE EXCAVATION PROCESS DOI: 10.5593/sgem2017/13/s03.057
  58. INTEGRATED ISSUES OF MINERAL DEPOSIT DEVELOPMENT FOR THE BENEFIT OF THE RUSSIAN ARCTIC ZONE PROGRESS DOI: 10.5593/sgem2017/13/s03.058
  59. INTEGRATED RESEARCH INTO FEATURES OF PHYSICAL FIELDS IN MODEL GEOMEDIUM WITH DISCONTINUITY GENERATED UNDER EXTERNAL STRESSES DOI: 10.5593/sgem2017/13/s03.059
  60. JUSTIFICATION OF PARAMETERS OF BUILDING INCLINED TRENCHES USING BELT CONVEYORS DOI: 10.5593/sgem2017/13/s03.060
  61. LABORATORY STAND TESTS OF MINING ASYMMETRICAL DISC TOOLS DOI: 10.5593/sgem2017/13/s03.062
  62. LABORATORY TESTS OF CONVEYOR BELT PARAMETERS AFFECTING ITS LIFETIME DOI: 10.5593/sgem2017/13/s03.063
  63. LOCAL AREA EDGE MONITORING OF THE NYURBINSKY OPEN-PIT MINE DOI: 10.5593/sgem2017/13/s03.064
  64. LOW AND HIGH SULPHIDATION EPITHERMAL GOLD DEPOSITS IN SARDINIA, ITALY DOI: 10.5593/sgem2017/13/s03.065
  65. MANAGEMENT RESERVES OF MINING OPERATIONS MODE IN OPEN PIT MINING OF STEEPLY DIPPING MINERAL OCCURENCES DOI: 10.5593/sgem2017/13/s03.066
  66. MATHEMATICAL MODELS OF POWERED ROOF SUPPORT INTERACTION WITH SURROUNDING ROCKS DOI: 10.5593/sgem2017/13/s03.067
  67. MATHEMATICAL MODELS USED TO DETERMINE THE STRAIN OF EXPERIMENTAL WORKS JIU VALLEY MINING BASIN DOI: 10.5593/sgem2017/13/s03.068
  68. METHOD OF AUTOMATED DETECTION OF SEISMICALLY ACTIVE ZONES WITHIN THE MINE FIELD BY THE DATA OF INDUCED SEISMICITY DOI: 10.5593/sgem2017/13/s03.069
  69. METHODICAL APPROACHES FOR FEASIBILITY STUDY OF POTENTIAL DEVELOPMENT OF ARCTIC MINERAL DEPOSITS DOI: 10.5593/sgem2017/13/s03.070
  70. MODERNIZATION OF ESRC - 1400 EXCAVATOR BUCKETS WITH THE HELP OF CAD/CAE SOFTWARE DOI: 10.5593/sgem2017/13/s03.071
  71. MONITORING SYSTEM OF ROCKBOLTING INTERACTION IN ROCK MASS CONDUCT UNDER SEISMIC ACTIVITY IN UNDEGROUND MINES DOI: 10.5593/sgem2017/13/s03.072
  72. NEW SOLUTIONS OF MINING TOOLS FOR HARD ROCK MINING DOI: 10.5593/sgem2017/13/s03.073
  73. NEW TRENDS TO OPTIMIZE THE OPERATING PARAMETERS OF VERTICAL TRANSPORT INSTALLATIONS DOI: 10.5593/sgem2017/13/s03.074
  74. NUMERICAL CALCULATION ASSESSMENT OF THE PARAMETERS OF ANCHORED SUPPORTS USED FOR THE CONSOLIDATION OR ROCKS SURROUNDING UNDERGROUND EXCAVATIONS DOI: 10.5593/sgem2017/13/s03.042
  75. NUMERICAL MODELLING OF BLIND EXCAVATION VENTILATION TAKING INTO ACCOUNT A FAILURE ZONE DOI: 10.5593/sgem2017/13/s03.075
  76. OPEN PIT MINING TECHNOLOGY OF STEEPLY DIPPING MINERAL OCCURENCES BY STEEPLY INCLINED SUBLAYERS DOI: 10.5593/sgem2017/13/s03.076
  77. OPTIMIZATION OF GEOMETRIC AND STRENGTH PARAMETERS OF TEETH FOR BUCKET WHEEL EXCAVATOR IN VIEW TO INCREASING THE CUTTING EFFICIENCY DOI: 10.5593/sgem2017/13/s03.077
  78. OPTIMIZATION OF THE ROD EYE FOR A TILTING PLATFORM DOI: 10.5593/sgem2017/13/s03.078
  79. OPTIMIZING OF COSTS AND REVENUES ON STONE AND COAL QUARRIES DOI: 10.5593/sgem2017/13/s03.079
  80. OPTIMIZING RELATIONSHIPS BETWEEN COSTS AND REVENUES ON QUARRIES IN THE CZECH REPUBLIC DOI: 10.5593/sgem2017/13/s03.080
  81. OVERVIEW OF THE UNWANTED EFFECTS OF UNMINEABLE ROCK FORMATIONS ON THE MINING SYSTEM OF BUCKET WHEEL EXCAVATOR DURING THE EXCAVATION PROCESS DOI: 10.5593/sgem2017/13/s03.081
  82. PARTIAL REPLACEMENTS OF CONBEYOR BELT LOOP ANALYSIS WITH REGARD TO ITS RELIABILITY DOI: 10.5593/sgem2017/13/s03.082
  83. PARTICULARITIES OF DESTRUCTION OF OUT-CONTOUR ROCK MASS ASSOCIATED WITH BLASTING THE SYSTEM OF BOREHOLE CHARGES DOI: 10.5593/sgem2017/13/s03.083
  84. POSSIBILITY FOR APPLICATION OF COMBINED METHODS OF MINING IN COAL MINES OF SERBIA DOI: 10.5593/sgem2017/13/s03.084
  85. PROBLEMS OF CULVERTS ON MINING SUBSIDENCE AREAS DOI: 10.5593/sgem2017/13/s03.085
  86. PRODUCTION OF CHEMICAL EMISSIONS OF BLACK-COAL MINE AND THEIR INFLUENCE ON THE PUBLIC HEALTH IN THE CONDITIONS OF THE OSTRAVA INDUSTRIAL REGION DOI: 10.5593/sgem2017/13/s03.086
  87. PROSPECTIVE SOLVING OF A VENTILATION NETWORK USING 3D CANVENT SOFTWARE DOI: 10.5593/sgem2017/13/s03.087
  88. PROVISION OF POSSIBILITY OF CONSTRUCTING CONVEYOR HOIST IN A STATIONARY POSITION DURING DEVELOPEMNT OF A WORKING ZONE ON STEEP PIT EDGES OF AN OPEN-PIT MINE DOI: 10.5593/sgem2017/13/s03.088
  89. PSYCHOLOGICAL TRAINING MODEL FOR INTERVENTION AND RESCUE PERSONNEL DOI: 10.5593/sgem2017/13/s03.089
  90. RADIOLOGICAL IMPACT ASSESSMENT OF URANIUM MINE DEPOSIT DOI: 10.5593/sgem2017/13/s03.090
  91. RECLAMATION IN THE ERVENICE AREA WITH THE USE OF SECONDARY ENERGY PRODUCTS DOI: 10.5593/sgem2017/13/s03.091
  92. RECOVERY AND RECYCLING OF CRITICAL METALS - A STRATEGIC PRIORITY FOR EUROPEAN UNION DOI: 10.5593/sgem2017/13/s03.092
  93. REDEVELOPMENT AND SUBSEQUENT RECLAMATION OF TRACHYANDEZIT (LATIT) MINE (TEPHRITE) IN BRANANY LOCATION DOI: 10.5593/sgem2017/13/s03.093
  94. RELIABILITY ANALYSIS OF THE BRAKE PADS OF THE WHEELED FRONT END LOADING AND TRANSPORTATION MACHINERY USED IN MINING DOI: 10.5593/sgem2017/13/s03.094
  95. RESEARCH ON THE DEVELOPMENT OF METHODS FOR DETERMINING THE SURFACE TEMPERATURES OF NON-ELECTRICAL EQUIPMENT AIMING PREVENTION AND PROTECTION TO EXPLOSION DOI: 10.5593/sgem2017/13/s03.095
  96. RESEARCHES IN THE PHASE OF EXPLOITATION OF THE ORE BODY CUKAR 2 EAST IN FUNCTION OF INCREASING LIFETIME OF THE BUCHIM COPPER MINE, EASTERN MACEDONIA DOI: 10.5593/sgem2017/13/s03.096
  97. RESULTS OF LONG TERM TESTING OF GEOLOGICAL SITUATION AND EXCAVATOR SCHRS 1550-4X30/K109 PARAMETERS DURING THE RELOCATION TO THE POSITION WITH THE WORSE MINING CONDITIONS IN THE LIBOUS MINE (THE MOST BASIN) DOI: 10.5593/sgem2017/13/s03.097
  98. REVEAL OF INTERRELATIONSHIP BETWEEN STRESS STATE AND SEISMIC ACTIVITY IN THE TECTONIC STRESSED ROCK MASS DOI: 10.5593/sgem2017/13/s03.098
  99. ROLE AND RELEVANCE OF AN ELECTRO CONTROL SYSTEM FOR THE OPERATION OF A POWERED ROOF SUPPORT DOI: 10.5593/sgem2017/13/s03.099
  100. ROPECON - PROGRESSIVE TRANSPORTATION SYSTEM FOR CONTINUOUS RAW MATERIALS TRASPORTATION DOI: 10.5593/sgem2017/13/s03.100
  101. ROTARY PERCUSSIVE DRILLING WITH SUBMERSIBLE DRILLING HAMMERS AND OTHER METHODS OF DRILLING WORK IN QUARRY OPERATIONS DOI: 10.5593/sgem2017/13/s03.101
  102. SIMULATION INVESTIGATIONS OF ROADHEADER DYNAMICS FOR AUTOMATIC CONTROL OF CUTTING PROCESS DOI: 10.5593/sgem2017/13/s03.102
  103. STRUCTURAL DETAILS AND OPERATIONAL AND CALCULATION PARTICULARITIES OF HYDRAULIC POWER SYSTEMS FOR THE ROOF SUPPORTS DOI: 10.5593/sgem2017/13/s03.103
  104. STUDY OF THE DEPENDENCE BETWEEN THE CUTTING DIRECTION RELATIVE TO STRATIFICATION AND THE DIGGING CHARACTERISTICS OF LIGNITE IN OLTENIA COAL BASIN (ROMANIA) DOI: 10.5593/sgem2017/13/s03.104
  105. STUDY ON WORKERS` EXPOSURE TO INHALABLE WOOD DUSTS IN MINING INDUSTRY DOI: 10.5593/sgem2017/13/s03.105
  106. TALC-BEARING ROCKS OF KARELIA, THEIR PROPERTIES AND POSSIBLE APPLICATION (EXEMPLIFIED BY THE KALLIEVO-MURENNANVAARA DEPOSIT) DOI: 10.5593/sgem2017/13/s03.061
  107. TECHNICAL SOLUTION FOR THE MINING DRILLING EQUIPMENT COMMAND SYSTEM DOI: 10.5593/sgem2017/13/s03.106
  108. TESTS CARRIED OUT ON CABLE ENTRIES AND THEIR IMPORTANCE WITHIN THE CERTIFICATION PROCESS OF EXPLOSION-PROOF EQUIPMENT DOI: 10.5593/sgem2017/13/s03.107
  109. THE CONDITIONS OF APPLICATION OF FLY ASH FROM BIOMASS IN THE AGRICULTURAL, FORESTRY AND RECLAMATION ACTIVITIES IN THE CZECH REPUBLIC DOI: 10.5593/sgem2017/13/s03.108
  110. THE CONFORMITY OF DELAYED IGNITION MEANS AS KEY FACTOR ON A SAFE BLASTING IN QUARRIES DOI: 10.5593/sgem2017/13/s03.109
  111. THE CORELATION BETWEEN PHYSICAL-MECHANICAL PROPERTIES AND THE CUTTING CHARACTERISTICS IN THE CASE OF UNMINEABLE ROCK FORMATIONS FROM HUSNICIOARA LIGNITE OPEN PIT DOI: 10.5593/sgem2017/13/s03.110
  112. THE COST-EFFECTIVE AND GEOTECHNIC SAFELY BUILDINGS ON THE AREAS WITH MINE EXPLOITATION DOI: 10.5593/sgem2017/13/s03.111
  113. THE INCREASE OF ENERGETIC EFFICIENCY OF SCREW COMPRESSORS USED FOR THE PRODUCTION OF COMPRESSED AIR INSIDE A COAL MINE DOI: 10.5593/sgem2017/13/s03.112
  114. THE METHOD OF DETECTING MOVEMENTS OF THE MACHINE TOOL FOUNDATIONS DOI: 10.5593/sgem2017/13/s03.113
  115. THE METHOD OF MINIMIZING THE CALCULATED POWER OF VERTICAL TRANSPORT INSTALLATIONS DOI: 10.5593/sgem2017/13/s03.114
  116. THE PERSPECTIVE OF THE USE OF MINERAL FUELS MINED IN SLOVAKIA DOI: 10.5593/sgem2017/13/s03.115
  117. THE POSSIBILITY OF BATTERY DRIVE APPLICATION IN MINING DRILLING RIGS DOI: 10.5593/sgem2017/13/s03.116
  118. THE PROPOSAL OF THE TEST EQUIPMENT FOR ANALYSIS OF THE COVERING LAYERS OF THE CONVEYOR BELT DOI: 10.5593/sgem2017/13/s03.117
  119. THE ROLE OF COAL PIT EXPLOITATION FROM THE JIU VALLEY ON THE REGION`S SUSTAINABLE FUTURE DOI: 10.5593/sgem2017/13/s03.118
  120. THE STUDY OF THE INTERACTION MECHANISM IN THE ROCK - SUPPORT SYSTEM CONSIDERING THE DEFORMATION BEHAVIOUR OF ROCKS SURROUNDING UNDERGROUND EXCAVATIONS DOI: 10.5593/sgem2017/13/s03.119
  121. THE TECHNOLOGY OF THE PLASMA CUTTING ON A CNC MACHINE DOI: 10.5593/sgem2017/13/s03.120
  122. USING THE FBG TECHNOLOGY FOR SAFETY AND OPERATION ISSUES OF UNDERGROUND MINING MACHINERY DOI: 10.5593/sgem2017/13/s03.121
  123. VALORIZATION OF COAL MINING WASTE DUMPS ON THE BASE OF GLIWICE CITY (SOUTHERN POLAND) DOI: 10.5593/sgem2017/13/s03.122
  124. VARIANTS OF IDENTIFICATION OF THE RUN-OF-MINE ORE COMPOUND WITH THE HELP OF PROCESS ANALYTIC TECHNOLOGY IN THE KGHM UNDERGROUND COPPER MINES DOI: 10.5593/sgem2017/13/s03.123
  125. VERIFICATION OF FORECASTS OF SUBSIDENCES, INCLINATIONS AND CURVATURES OF AREA CAUSED BY MULTIDEPOSIT MINING CONDUCTED BY INCLUDING MINING MARGIN - CASE ANALYSIS DOI: 10.5593/sgem2017/13/s03.124
View or Download full volumeAccess options
Proceedings volume accessChoose SWS login, librarian support, or direct proceedings volume purchase.

SWS access login

Login as SWS Scientific Committee

Approved SWS contributors can access linked proceedings materials after identity matching by SWS profile, email and SGEM GlobalID.

For librarian assistance: [email protected]

Purchase Proceedings Volume

Direct volume purchaseSGEM Publishing
  • Buy access to the selected proceedings volume through the SWS Library purchase workflow.
  • Volume access is matched to this repository record after confirmation.
  • Table of contents remains publicly available when imported.
Buy / Download proceedings volume

Back to publication list